diff --git a/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info new file mode 100644 index 0000000..fe742a2 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1702867957 diff --git a/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json new file mode 100644 index 0000000..d775f7f --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json @@ -0,0 +1,40 @@ +{ + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "19.99" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "PETG - Overture @CR-10s" + ], + "filament_vendor": [ + "Overture" + ], + "from": "User", + "inherits": "My Generic PETG", + "is_custom_defined": "0", + "name": "PETG - Overture @CR-10s", + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.26" + ], + "slow_down_layer_time": [ + "1" + ], + "version": "1.6.1.0" +} diff --git a/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.info b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.info new file mode 100644 index 0000000..c6c8c7a --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1696802272 diff --git a/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.json b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.json new file mode 100644 index 0000000..33143fa --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.json @@ -0,0 +1,34 @@ +{ + "enable_pressure_advance": [ + "1" + ], + "filament_cost": [ + "19.99" + ], + "filament_flow_ratio": [ + "0.9025" + ], + "filament_settings_id": [ + "PETG - Overture" + ], + "filament_vendor": [ + "Overture" + ], + "from": "User", + "inherits": "My Generic PETG", + "is_custom_defined": "0", + "name": "PETG - Overture", + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "pressure_advance": [ + "0.26" + ], + "slow_down_layer_time": [ + "1" + ], + "version": "1.6.1.0" +} diff --git a/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.info b/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.info new file mode 100644 index 0000000..ce2b456 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1734886086 diff --git a/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.json b/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.json new file mode 100644 index 0000000..314ac7a --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.json @@ -0,0 +1,13 @@ +{ + "filament_flow_ratio": [ + "0.955" + ], + "filament_settings_id": [ + "Voron Overture PETG" + ], + "from": "User", + "inherits": "Voron Generic PETG", + "is_custom_defined": "0", + "name": "Voron Overture PETG", + "version": "2.2.0.4" +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info new file mode 100644 index 0000000..ffd3098 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1728686097 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json new file mode 100644 index 0000000..1b32a26 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "from": "User", + "inherits": "Voron 2.4 350 0.4 nozzle", + "is_custom_defined": "0", + "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "name": "AquaVoron 2.4 350 0.4 nozzle", + "print_host": "192.168.20.21", + "printer_settings_id": "AquaVoron 2.4 350 0.4 nozzle", + "version": "1.8.0.0" +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info new file mode 100644 index 0000000..c9abde5 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM003 +updated_time = 1728686148 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json new file mode 100644 index 0000000..79c0fd3 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json @@ -0,0 +1,13 @@ +{ + "from": "User", + "inherits": "Voron 2.4 350 0.6 nozzle", + "is_custom_defined": "0", + "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "name": "AquaVoron 2.4 350 0.6 nozzle", + "print_host": "http://192.168.20.21", + "printer_settings_id": "AquaVoron 2.4 350 0.6 nozzle", + "retraction_length": [ + "0.1" + ], + "version": "1.8.0.0" +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.info new file mode 100644 index 0000000..13ac5be --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GM001 +updated_time = 1695585702 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.json new file mode 100644 index 0000000..eb08ec1 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.json @@ -0,0 +1,86 @@ +{ + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n", + "from": "User", + "inherits": "MyKlipper 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT", + "machine_max_acceleration_extruding": [ + "500", + "20000" + ], + "machine_max_acceleration_retracting": [ + "1000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "20000" + ], + "machine_max_acceleration_y": [ + "500", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_e": [ + "5", + "2.5" + ], + "machine_max_jerk_x": [ + "8", + "9" + ], + "machine_max_jerk_y": [ + "8", + "9" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_max_speed_e": [ + "60", + "25" + ], + "machine_max_speed_z": [ + "10", + "12" + ], + "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "max_layer_height": [ + "0.48" + ], + "name": "CR-10s 0.25 nozzle", + "nozzle_diameter": [ + "0.25" + ], + "nozzle_type": "brass", + "print_host": "192.168.1.5", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "printer_settings_id": "CR-10s 0.25 nozzle", + "retract_length_toolchange": [ + "1" + ], + "retraction_length": [ + "0.5" + ], + "retraction_minimum_travel": [ + "2" + ], + "use_firmware_retraction": "1", + "version": "1.6.1.0", + "wipe": [ + "0" + ], + "z_hop_types": [ + "Auto Lift" + ] +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info new file mode 100644 index 0000000..d05bcee --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1695585702 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json new file mode 100644 index 0000000..b6c0cf4 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json @@ -0,0 +1,86 @@ +{ + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n", + "from": "User", + "inherits": "MyKlipper 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT", + "machine_max_acceleration_extruding": [ + "500", + "20000" + ], + "machine_max_acceleration_retracting": [ + "1000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "20000" + ], + "machine_max_acceleration_y": [ + "500", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_e": [ + "5", + "2.5" + ], + "machine_max_jerk_x": [ + "8", + "9" + ], + "machine_max_jerk_y": [ + "8", + "9" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_max_speed_e": [ + "60", + "25" + ], + "machine_max_speed_z": [ + "10", + "12" + ], + "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "max_layer_height": [ + "0.48" + ], + "name": "CR-10s 0.4 nozzle", + "nozzle_type": "brass", + "print_host": "https://cr10.aquamorph.com", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "printer_settings_id": "CR-10s 0.4 nozzle", + "retract_length_toolchange": [ + "1" + ], + "retraction_length": [ + "0.5" + ], + "retraction_minimum_travel": [ + "2" + ], + "use_firmware_retraction": "1", + "version": "1.6.1.0", + "wipe": [ + "0" + ], + "z_hop": [ + "0" + ], + "z_hop_types": [ + "Auto Lift" + ] +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info new file mode 100644 index 0000000..53054c8 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1702220626 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json new file mode 100644 index 0000000..9e03cdd --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json @@ -0,0 +1,89 @@ +{ + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n", + "from": "User", + "inherits": "MyKlipper 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT", + "machine_max_acceleration_extruding": [ + "500", + "20000" + ], + "machine_max_acceleration_retracting": [ + "1000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "20000" + ], + "machine_max_acceleration_y": [ + "500", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_e": [ + "5", + "2.5" + ], + "machine_max_jerk_x": [ + "8", + "9" + ], + "machine_max_jerk_y": [ + "8", + "9" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_max_speed_e": [ + "60", + "25" + ], + "machine_max_speed_z": [ + "10", + "12" + ], + "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "max_layer_height": [ + "0.48" + ], + "name": "CR-10s 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_type": "brass", + "print_host": "192.168.20.20", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "printer_settings_id": "CR-10s 0.6 nozzle", + "retract_length_toolchange": [ + "1" + ], + "retraction_length": [ + "0.5" + ], + "retraction_minimum_travel": [ + "2" + ], + "use_firmware_retraction": "1", + "version": "1.6.1.0", + "wipe": [ + "0" + ], + "z_hop": [ + "0" + ], + "z_hop_types": [ + "Auto Lift" + ] +} diff --git a/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info b/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info new file mode 100644 index 0000000..8d7b1f3 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1695341948 diff --git a/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json b/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json new file mode 100644 index 0000000..c1253f9 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json @@ -0,0 +1,85 @@ +{ + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n", + "from": "User", + "inherits": "MyKlipper 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT", + "machine_max_acceleration_extruding": [ + "500", + "20000" + ], + "machine_max_acceleration_retracting": [ + "1000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "20000" + ], + "machine_max_acceleration_y": [ + "500", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_e": [ + "5", + "2.5" + ], + "machine_max_jerk_x": [ + "8", + "9" + ], + "machine_max_jerk_y": [ + "8", + "9" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_max_speed_e": [ + "60", + "25" + ], + "machine_max_speed_z": [ + "10", + "12" + ], + "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]", + "max_layer_height": [ + "0.48" + ], + "name": "Ender 3 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_type": "brass", + "print_host": "192.168.1.6", + "printable_area": [ + "0x0", + "235x0", + "235x235", + "0x235" + ], + "printer_settings_id": "Ender 3 0.6 nozzle", + "retract_length_toolchange": [ + "1" + ], + "retraction_length": [ + "0.5" + ], + "retraction_minimum_travel": [ + "2" + ], + "use_firmware_retraction": "1", + "version": "1.6.1.0", + "wipe": [ + "0" + ], + "z_hop_types": [ + "Auto Lift" + ] +} diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info b/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info new file mode 100644 index 0000000..7d65092 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info @@ -0,0 +1,5 @@ +sync_info = +user_id = +setting_id = +base_id = GP004 +updated_time = 1735702877 diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json b/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json new file mode 100644 index 0000000..4cc859e --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json @@ -0,0 +1,9 @@ +{ + "brim_type": "no_brim", + "from": "User", + "inherits": "0.18mm Fine 0.6 nozzle @Voron", + "is_custom_defined": "0", + "name": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph", + "print_settings_id": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph", + "version": "2.2.0.4" +} diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info b/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info new file mode 100644 index 0000000..7898889 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1702867957 diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json b/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json new file mode 100644 index 0000000..59546a6 --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json @@ -0,0 +1,41 @@ +{ + "brim_type": "no_brim", + "brim_width": "10", + "default_acceleration": "0", + "enable_support": "1", + "from": "User", + "gap_infill_speed": "30", + "infill_combination": "1", + "inherits": "0.20mm Standard @MyKlipper", + "initial_layer_acceleration": "0", + "initial_layer_infill_speed": "35", + "initial_layer_line_width": "137%", + "initial_layer_speed": "20", + "inner_wall_acceleration": "0", + "inner_wall_line_width": "112%", + "inner_wall_speed": "35", + "internal_solid_infill_line_width": "112%", + "internal_solid_infill_speed": "50", + "is_custom_defined": "0", + "line_width": "100%", + "name": "0.20mm Standard CR-10s", + "outer_wall_acceleration": "0", + "outer_wall_line_width": "80%", + "outer_wall_speed": "35", + "print_settings_id": "0.20mm Standard CR-10s", + "sparse_infill_density": "30%", + "sparse_infill_line_width": "107%", + "sparse_infill_pattern": "adaptivecubic", + "sparse_infill_speed": "60", + "support_interface_speed": "30", + "support_line_width": "95%", + "support_object_xy_distance": "0.75", + "support_speed": "30", + "support_type": "tree(auto)", + "top_surface_acceleration": "0", + "top_surface_line_width": "107%", + "top_surface_speed": "30", + "travel_acceleration": "1500", + "travel_speed": "150", + "version": "1.6.1.0" +} diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info b/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info new file mode 100644 index 0000000..f10402c --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info @@ -0,0 +1,5 @@ +sync_info = +user_id = +setting_id = +base_id = GP004 +updated_time = 1736606291 diff --git a/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json b/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json new file mode 100644 index 0000000..db7e8ee --- /dev/null +++ b/home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json @@ -0,0 +1,9 @@ +{ + "brim_type": "no_brim", + "from": "User", + "inherits": "0.30mm Standard 0.6 nozzle @Voron", + "is_custom_defined": "0", + "name": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph", + "print_settings_id": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph", + "version": "2.2.0.4" +}