diff --git a/install.sh b/install.sh
index feb80a6..a6f3f9d 100755
--- a/install.sh
+++ b/install.sh
@@ -118,6 +118,7 @@ function stow_dotfiles {
     stow waybar
     stow mako
     stow scripts
+    stow orcaslicer
 }
 
 function install_python_libs {
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info
new file mode 100644
index 0000000..e08d25e
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1697299895
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json
new file mode 100644
index 0000000..685b34f
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json	
@@ -0,0 +1,31 @@
+{
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture @CR-10s"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture @CR-10s",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.info b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.info
new file mode 100644
index 0000000..c6c8c7a
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1696802272
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.json b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.json
new file mode 100644
index 0000000..33143fa
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.json	
@@ -0,0 +1,34 @@
+{
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_flow_ratio": [
+        "0.9025"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info
new file mode 100644
index 0000000..13ac5be
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695585702
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json
new file mode 100644
index 0000000..aabe809
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json	
@@ -0,0 +1,83 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.5",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.4 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info
new file mode 100644
index 0000000..ff701a9
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1700927332
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json
new file mode 100644
index 0000000..86e040e
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json	
@@ -0,0 +1,89 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.5",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info b/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info
new file mode 100644
index 0000000..8d7b1f3
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695341948
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json b/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json
new file mode 100644
index 0000000..c1253f9
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json	
@@ -0,0 +1,85 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "Ender 3 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.6",
+    "printable_area": [
+        "0x0",
+        "235x0",
+        "235x235",
+        "0x235"
+    ],
+    "printer_settings_id": "Ender 3 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info b/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info
new file mode 100644
index 0000000..3bce1a4
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1697250231
diff --git a/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json b/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json
new file mode 100644
index 0000000..c9f880c
--- /dev/null
+++ b/orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json	
@@ -0,0 +1,39 @@
+{
+    "brim_type": "brim_ears",
+    "brim_width": "10",
+    "default_acceleration": "0",
+    "enable_support": "1",
+    "from": "User",
+    "gap_infill_speed": "30",
+    "infill_combination": "1",
+    "inherits": "0.20mm Standard @MyKlipper",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "35",
+    "initial_layer_line_width": "137%",
+    "initial_layer_speed": "20",
+    "inner_wall_acceleration": "0",
+    "inner_wall_line_width": "112%",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_line_width": "112%",
+    "internal_solid_infill_speed": "50",
+    "is_custom_defined": "0",
+    "line_width": "100%",
+    "name": "0.20mm Standard CR-10s",
+    "outer_wall_acceleration": "0",
+    "outer_wall_line_width": "80%",
+    "outer_wall_speed": "40",
+    "print_settings_id": "0.20mm Standard CR-10s",
+    "sparse_infill_density": "30%",
+    "sparse_infill_line_width": "107%",
+    "sparse_infill_speed": "60",
+    "support_interface_speed": "30",
+    "support_line_width": "95%",
+    "support_speed": "30",
+    "support_type": "tree(auto)",
+    "top_surface_acceleration": "0",
+    "top_surface_line_width": "107%",
+    "top_surface_speed": "30",
+    "travel_acceleration": "1500",
+    "travel_speed": "150",
+    "version": "1.6.1.0"
+}