AquaAI alias

.gitignore

@@ -1,4 +1,4 @@
-i3/config
+i3/.config/i3/config
 settings.conf
 systemd/user/*/*
 

README.md

@@ -9,11 +9,6 @@ Run the following command to install
 ```sh
 cd ~ && git clone git@github.com:AquaMorph/dotfiles.git && sh ~/dotfiles/install.sh
 ```
-Install the needed Python packages
-
-```sh
-pip install -r requirements.txt
-```
 
 ## Scripts
 

alacritty/.config/alacritty/alacritty.toml

@@ -0,0 +1,606 @@
+
+[bell]
+animation = "EaseOutExpo"
+color = "0xffffff"
+duration = 0
+
+[colors]
+draw_bold_text_with_bright_colors = true
+
+[colors.bright]
+black = "0x666666"
+blue = "0x7aa6da"
+cyan = "0x54ced6"
+green = "0x9ec400"
+magenta = "0xb77ee0"
+red = "0xff3334"
+white = "0xffffff"
+yellow = "0xe7c547"
+
+[colors.normal]
+black = "0x000000"
+blue = "0x7aa6da"
+cyan = "0x70c0ba"
+green = "0xb9ca4a"
+magenta = "0xc397d8"
+red = "0xd54e53"
+white = "0xeaeaea"
+yellow = "0xe6c547"
+
+[colors.primary]
+background = "0x000000"
+foreground = "0x0288d1"
+
+[cursor]
+style = "Block"
+unfocused_hollow = true
+
+[debug]
+log_level = "Warn"
+persistent_logging = false
+print_events = false
+render_timer = false
+
+[font]
+size = 16.0
+
+[font.glyph_offset]
+x = 0
+y = 0
+
+[font.normal]
+family = "Inconsolata"
+style = "Monospace"
+
+[font.offset]
+x = 0
+y = 0
+
+[[keyboard.bindings]]
+action = "Paste"
+key = "Paste"
+
+[[keyboard.bindings]]
+action = "Copy"
+key = "Copy"
+
+[[keyboard.bindings]]
+action = "ClearLogNotice"
+key = "L"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\f"
+key = "L"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3H"
+key = "Home"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001BOH"
+key = "Home"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[H"
+key = "Home"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3F"
+key = "End"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001BOF"
+key = "End"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[F"
+key = "End"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+action = "ScrollPageUp"
+key = "PageUp"
+mode = "~Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;2~"
+key = "PageUp"
+mode = "Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;5~"
+key = "PageUp"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;3~"
+key = "PageUp"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[5~"
+key = "PageUp"
+
+[[keyboard.bindings]]
+action = "ScrollPageDown"
+key = "PageDown"
+mode = "~Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;2~"
+key = "PageDown"
+mode = "Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;5~"
+key = "PageDown"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;3~"
+key = "PageDown"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[6~"
+key = "PageDown"
+
+[[keyboard.bindings]]
+chars = "\u001B[Z"
+key = "Tab"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u007F"
+key = "Back"
+
+[[keyboard.bindings]]
+chars = "\u001B\u007F"
+key = "Back"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[2~"
+key = "Insert"
+
+[[keyboard.bindings]]
+chars = "\u001B[3~"
+key = "Delete"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2D"
+key = "Left"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5D"
+key = "Left"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3D"
+key = "Left"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[D"
+key = "Left"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOD"
+key = "Left"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2C"
+key = "Right"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5C"
+key = "Right"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3C"
+key = "Right"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[C"
+key = "Right"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOC"
+key = "Right"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2A"
+key = "Up"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5A"
+key = "Up"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3A"
+key = "Up"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[A"
+key = "Up"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOA"
+key = "Up"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2B"
+key = "Down"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5B"
+key = "Down"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3B"
+key = "Down"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[B"
+key = "Down"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOB"
+key = "Down"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOP"
+key = "F1"
+
+[[keyboard.bindings]]
+chars = "\u001BOQ"
+key = "F2"
+
+[[keyboard.bindings]]
+chars = "\u001BOR"
+key = "F3"
+
+[[keyboard.bindings]]
+chars = "\u001BOS"
+key = "F4"
+
+[[keyboard.bindings]]
+chars = "\u001B[15~"
+key = "F5"
+
+[[keyboard.bindings]]
+chars = "\u001B[17~"
+key = "F6"
+
+[[keyboard.bindings]]
+chars = "\u001B[18~"
+key = "F7"
+
+[[keyboard.bindings]]
+chars = "\u001B[19~"
+key = "F8"
+
+[[keyboard.bindings]]
+chars = "\u001B[20~"
+key = "F9"
+
+[[keyboard.bindings]]
+chars = "\u001B[21~"
+key = "F10"
+
+[[keyboard.bindings]]
+chars = "\u001B[23~"
+key = "F11"
+
+[[keyboard.bindings]]
+chars = "\u001B[24~"
+key = "F12"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2P"
+key = "F1"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2Q"
+key = "F2"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2R"
+key = "F3"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2S"
+key = "F4"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;2~"
+key = "F5"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;2~"
+key = "F6"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;2~"
+key = "F7"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;2~"
+key = "F8"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;2~"
+key = "F9"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;2~"
+key = "F10"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;2~"
+key = "F11"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;2~"
+key = "F12"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5P"
+key = "F1"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5Q"
+key = "F2"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5R"
+key = "F3"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5S"
+key = "F4"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;5~"
+key = "F5"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;5~"
+key = "F6"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;5~"
+key = "F7"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;5~"
+key = "F8"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;5~"
+key = "F9"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;5~"
+key = "F10"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;5~"
+key = "F11"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;5~"
+key = "F12"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6P"
+key = "F1"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6Q"
+key = "F2"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6R"
+key = "F3"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6S"
+key = "F4"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;6~"
+key = "F5"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;6~"
+key = "F6"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;6~"
+key = "F7"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;6~"
+key = "F8"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;6~"
+key = "F9"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;6~"
+key = "F10"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;6~"
+key = "F11"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;6~"
+key = "F12"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3P"
+key = "F1"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3Q"
+key = "F2"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3R"
+key = "F3"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3S"
+key = "F4"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;3~"
+key = "F5"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;3~"
+key = "F6"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;3~"
+key = "F7"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;3~"
+key = "F8"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;3~"
+key = "F9"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;3~"
+key = "F10"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;3~"
+key = "F11"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;3~"
+key = "F12"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = """
+
+"""
+key = "NumpadEnter"
+
+[mouse]
+hide_when_typing = false
+
+[[mouse.bindings]]
+action = "PasteSelection"
+mouse = "Middle"
+
+[scrolling]
+history = 10000
+multiplier = 3
+
+[selection]
+save_to_clipboard = false
+semantic_escape_chars = ",│`|:\"' ()[]{}<>"
+
+[window]
+decorations = "full"
+dynamic_padding = false
+opacity = 0.8
+startup_mode = "Windowed"
+
+[window.dimensions]
+columns = 0
+lines = 0
+
+[window.padding]
+x = 4
+y = 4
+
+[general]
+live_config_reload = true
+working_directory = "None"

alacritty/.config/alacritty/alacritty.yml

@@ -1,603 +0,0 @@
-# Configuration for Alacritty, the GPU enhanced terminal emulator.
-
-# Any items in the `env` entry below will be added as
-# environment variables. Some entries may override variables
-# set by alacritty itself.
-#env:
-  # TERM variable
-  #
-  # This value is used to set the `$TERM` environment variable for
-  # each instance of Alacritty. If it is not present, alacritty will
-  # check the local terminfo database and use `alacritty` if it is
-  # available, otherwise `xterm-256color` is used.
-  #TERM: xterm-256color
-
-window:
-  # Window dimensions (changes require restart)
-  #
-  # Specified in number of columns/lines, not pixels.
-  # If both are `0`, this setting is ignored.
-  dimensions:
-    columns: 0
-    lines: 0
-
-  # Window position (changes require restart)
-  #
-  # Specified in number of pixels.
-  # If the position is not set, the window manager will handle the placement.
-  #position:
-  #  x: 0
-  #  y: 0
-
-  # Window padding (changes require restart)
-  #
-  # Blank space added around the window in pixels. This padding is scaled
-  # by DPI and the specified value is always added at both opposing sides.
-  padding:
-    x: 4
-    y: 4
-
-  # Spread additional padding evenly around the terminal content.
-  dynamic_padding: false
-
-  # Window decorations
-  #
-  # Values for `decorations`:
-  #     - full: Borders and title bar
-  #     - none: Neither borders nor title bar
-  #
-  # Values for `decorations` (macOS only):
-  #     - transparent: Title bar, transparent background and title bar buttons
-  #     - buttonless: Title bar, transparent background, but no title bar buttons
-  decorations: full
-
-  # Startup Mode (changes require restart)
-  #
-  # Values for `startup_mode`:
-  #   - Windowed
-  #   - Maximized
-  #   - Fullscreen
-  #
-  # Values for `startup_mode` (macOS only):
-  #   - SimpleFullscreen
-  startup_mode: Windowed
-
-  # Window title
-  #title: Alacritty
-
-  # Window class (Linux only):
-  #class: Alacritty
-
-  opacity: 0.8
-
-scrolling:
-  # Maximum number of lines in the scrollback buffer.
-  # Specifying '0' will disable scrolling.
-  history: 10000
-
-  # Number of lines the viewport will move for every line scrolled when
-  # scrollback is enabled (history > 0).
-  multiplier: 3
-
-  # Faux Scrolling
-  #
-  # The `faux_multiplier` setting controls the number of lines the terminal
-  # should scroll when the alternate screen buffer is active. This is used
-  # to allow mouse scrolling for applications like `man`.
-  #
-  # Specifying `0` will disable faux scrolling.
-  multiplier: 3
-
-# Font configuration (changes require restart)
-font:
-  # Normal (roman) font face
-  normal:
-    # Font family
-    #
-    # Default:
-    #   - (macOS) Menlo
-    #   - (Linux) monospace
-    #   - (Windows) Consolas
-    family: Inconsolata
-
-    # The `style` can be specified to pick a specific face.
-    style: Monospace #Medium #Regular
-
-  # Bold font face
-  #bold:
-    # Font family
-    #
-    # If the bold family is not specified, it will fall back to the
-    # value specified for the normal font.
-    #family: monospace
-
-    # The `style` can be specified to pick a specific face.
-    #style: Bold
-
-  # Italic font face
-  #italic:
-    # Font family
-    #
-    # If the italic family is not specified, it will fall back to the
-    # value specified for the normal font.
-    #family: monospace
-
-    # The `style` can be specified to pick a specific face.
-    #style: Italic
-
-  # Point size
-  size: 16.0
-
-  # Offset is the extra space around each character. `offset.y` can be thought of
-  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
-  offset:
-    x: 0
-    y: 0
-
-  # Glyph offset determines the locations of the glyphs within their cells with
-  # the default being at the bottom. Increasing `x` moves the glyph to the right,
-  # increasing `y` moves the glyph upwards.
-  glyph_offset:
-    x: 0
-    y: 0
-
-# If `true`, bold text is drawn using the bright color variants.
-draw_bold_text_with_bright_colors: true
-
-# Colors (Tomorrow Night Bright)
-colors:
-  # Default colors
-  primary:
-    background: '0x000000'
-    foreground: '0x0288d1'
-
-    # Bright and dim foreground colors
-    #
-    # The dimmed foreground color is calculated automatically if it is not present.
-    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
-    # is `false`, the normal foreground color will be used.
-    #dim_foreground: '0x9a9a9a'
-    #bright_foreground: '0xffffff'
-
-  # Cursor colors
-  #
-  # Colors which should be used to draw the terminal cursor. If these are unset,
-  # the cursor color will be the inverse of the cell color.
-  #cursor:
-  #  text: '0x000000'
-  #  cursor: '0xffffff'
-
-  # Selection colors
-  #
-  # Colors which should be used to draw the selection area. If selection
-  # background is unset, selection color will be the inverse of the cell colors.
-  # If only text is unset the cell text color will remain the same.
-  #selection:
-  #  text: '0xeaeaea'
-  #  background: '0x404040'
-
-  # Normal colors
-  normal:
-    black:   '0x000000'
-    red:     '0xd54e53'
-    green:   '0xb9ca4a'
-    yellow:  '0xe6c547'
-    blue:    '0x7aa6da'
-    magenta: '0xc397d8'
-    cyan:    '0x70c0ba'
-    white:   '0xeaeaea'
-
-  # Bright colors
-  bright:
-    black:   '0x666666'
-    red:     '0xff3334'
-    green:   '0x9ec400'
-    yellow:  '0xe7c547'
-    blue:    '0x7aa6da'
-    magenta: '0xb77ee0'
-    cyan:    '0x54ced6'
-    white:   '0xffffff'
-
-  # Dim colors
-  #
-  # If the dim colors are not set, they will be calculated automatically based
-  # on the `normal` colors.
-  #dim:
-  #  black:   '0x000000'
-  #  red:     '0x8c3336'
-  #  green:   '0x7a8530'
-  #  yellow:  '0x97822e'
-  #  blue:    '0x506d8f'
-  #  magenta: '0x80638e'
-  #  cyan:    '0x497e7a'
-  #  white:   '0x9a9a9a'
-
-  # Indexed Colors
-  #
-  # The indexed colors include all colors from 16 to 256.
-  # When these are not set, they're filled with sensible defaults.
-  #
-  # Example:
-  #   `- { index: 16, color: '0xff00ff' }`
-  #
-  indexed_colors: []
-
-# Visual Bell
-#
-# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
-# rung, the terminal background will be set to white and transition back to the
-# default background color. You can control the rate of this transition by
-# setting the `duration` property (represented in milliseconds). You can also
-# configure the transition function by setting the `animation` property.
-#
-# Values for `animation`:
-#   - Ease
-#   - EaseOut
-#   - EaseOutSine
-#   - EaseOutQuad
-#   - EaseOutCubic
-#   - EaseOutQuart
-#   - EaseOutQuint
-#   - EaseOutExpo
-#   - EaseOutCirc
-#   - Linear
-#
-# Specifying a `duration` of `0` will disable the visual bell.
-bell:
-  animation: EaseOutExpo
-  duration: 0
-  color: '0xffffff'
-
-# Mouse bindings
-#
-# Available fields:
-#   - mouse
-#   - action
-#   - mods (optional)
-#
-# Values for `mouse`:
-#   - Middle
-#   - Left
-#   - Right
-#   - Numeric identifier such as `5`
-#
-# All available `mods` and `action` values are documented in the key binding
-# section.
-mouse_bindings:
-  - { mouse: Middle, action: PasteSelection }
-
-mouse:
-  # Click settings
-  #
-  # The `double_click` and `triple_click` settings control the time
-  # alacritty should wait for accepting multiple clicks as one double
-  # or triple click.
-  double_click: { threshold: 300 }
-  triple_click: { threshold: 300 }
-
-  # If this is `true`, the cursor is temporarily hidden when typing.
-  hide_when_typing: false
-
-  hints:
-    # URL launcher
-    #
-    # This program is executed when clicking on a text which is recognized as a URL.
-    # The URL is always added to the command as the last parameter.
-    #
-    # When set to `None`, URL launching will be disabled completely.
-    #
-    # Default:
-    #   - (macOS) open
-    #   - (Linux) xdg-open
-    #   - (Windows) explorer
-    #launcher:
-    #  program: xdg-open
-    #  args: []
-
-    # URL modifiers
-    #
-    # These are the modifiers that need to be held down for opening URLs when clicking
-    # on them. The available modifiers are documented in the key binding section.
-    modifiers: None
-
-selection:
-  semantic_escape_chars: ",│`|:\"' ()[]{}<>"
-
-  # When set to `true`, selected text will be copied to the primary clipboard.
-  save_to_clipboard: false
-
-# Allow terminal applications to change Alacritty's window title.
-window.dynamic_title: true
-
-cursor:
-  # Cursor style
-  #
-  # Values for `style`:
-  #   - ▇ Block
-  #   - _ Underline
-  #   - | Beam
-  style: Block
-
-  # If this is `true`, the cursor will be rendered as a hollow box when the
-  # window is not focused.
-  unfocused_hollow: true
-
-# Live config reload (changes require restart)
-live_config_reload: true
-
-# Shell
-#
-# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
-# Entries in `shell.args` are passed unmodified as arguments to the shell.
-#
-# Default:
-#   - (Linux/macOS) /bin/bash --login
-#   - (Windows) powershell
-#shell:
-#  program: /bin/bash
-#  args:
-#    - --login
-
-# Startup directory
-#
-# Directory the shell is started in. If this is unset, or `None`, the working
-# directory of the parent process will be used.
-working_directory: None
-
-# Windows 10 ConPTY backend (Windows only)
-#
-# This will enable better color support and may resolve other issues,
-# however this API and its implementation is still young and so is
-# disabled by default, as stability may not be as good as the winpty
-# backend.
-#
-# Alacritty will fall back to the WinPTY automatically if the ConPTY
-# backend cannot be initialized.
-enable_experimental_conpty_backend: false
-
-debug:
-  # Display the time it takes to redraw each frame.
-  render_timer: false
-
-  # Keep the log file after quitting Alacritty.
-  persistent_logging: false
-
-  # Log level
-  #
-  # Values for `log_level`:
-  #   - None
-  #   - Error
-  #   - Warn
-  #   - Info
-  #   - Debug
-  #   - Trace
-  log_level: Warn
-
-  # Print all received window events.
-  print_events: false
-
-  # Record all characters and escape sequences as test data.
-  ref_test: false
-
-# Key bindings
-#
-# Key bindings are specified as a list of objects. Each binding will specify a
-# key and modifiers required to trigger it, terminal modes where the binding is
-# applicable, and what should be done when the key binding fires. It can either
-# send a byte sequence to the running application (`chars`), execute a
-# predefined action (`action`) or fork and execute a specified command plus
-# arguments (`command`).
-#
-# Bindings are always filled by default, but will be replaced when a new binding
-# with the same triggers is defined. To unset a default binding, it can be
-# mapped to the `None` action.
-#
-# Example:
-#   `- { key: V, mods: Control|Shift, action: Paste }`
-#
-# Available fields:
-#   - key
-#   - mods (optional)
-#   - chars | action | command (exactly one required)
-#   - mode (optional)
-#
-# Values for `key`:
-#   - `A` -> `Z`
-#   - `F1` -> `F12`
-#   - `Key1` -> `Key0`
-#
-#   A full list with available key codes can be found here:
-#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
-#
-#   Instead of using the name of the keys, the `key` field also supports using
-#   the scancode of the desired key. Scancodes have to be specified as a
-#   decimal number.
-#   This command will allow you to display the hex scancodes for certain keys:
-#     `showkey --scancodes`
-#
-# Values for `mods`:
-#   - Command
-#   - Control
-#   - Option
-#   - Super
-#   - Shift
-#   - Alt
-#
-#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
-#   Whitespace and capitalization is relevant and must match the example.
-#
-# Values for `chars`:
-#   The `chars` field writes the specified string to the terminal. This makes
-#   it possible to pass escape sequences.
-#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
-#   the command `showkey -a` outside of tmux.
-#   Note that applications use terminfo to map escape sequences back to
-#   keys. It is therefore required to update the terminfo when
-#   changing an escape sequence.
-#
-# Values for `action`:
-#   - Paste
-#   - PasteSelection
-#   - Copy
-#   - IncreaseFontSize
-#   - DecreaseFontSize
-#   - ResetFontSize
-#   - ScrollPageUp
-#   - ScrollPageDown
-#   - ScrollLineUp
-#   - ScrollLineDown
-#   - ScrollToTop
-#   - ScrollToBottom
-#   - ClearHistory
-#   - Hide
-#   - Quit
-#   - ClearLogNotice
-#   - SpawnNewInstance
-#   - ToggleFullscreen
-#   - None
-#
-# Values for `action` (macOS only):
-#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
-#
-# Values for `command`:
-#   The `command` field must be a map containing a `program` string and
-#   an `args` array of command line parameter strings.
-#
-#   Example:
-#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
-#
-# Values for `mode`:
-#   - ~AppCursor
-#   - AppCursor
-#   - ~AppKeypad
-#   - AppKeypad
-key_bindings:
-  # (Windows/Linux only)
-  #- { key: V,        mods: Control|Shift, action: Paste            }
-  #- { key: C,        mods: Control|Shift, action: Copy             }
-  #- { key: Insert,   mods: Shift,         action: PasteSelection   }
-  #- { key: Key0,     mods: Control,       action: ResetFontSize    }
-  #- { key: Equals,   mods: Control,       action: IncreaseFontSize }
-  #- { key: Add,      mods: Control,       action: IncreaseFontSize }
-  #- { key: Subtract, mods: Control,       action: DecreaseFontSize }
-  #- { key: Minus,    mods: Control,       action: DecreaseFontSize }
-
-  # (macOS only)
-  #- { key: Key0,   mods: Command, action: ResetFontSize    }
-  #- { key: Equals, mods: Command, action: IncreaseFontSize }
-  #- { key: Add,    mods: Command, action: IncreaseFontSize }
-  #- { key: Minus,  mods: Command, action: DecreaseFontSize }
-  #- { key: K,      mods: Command, action: ClearHistory     }
-  #- { key: K,      mods: Command, chars: "\x0c"            }
-  #- { key: V,      mods: Command, action: Paste            }
-  #- { key: C,      mods: Command, action: Copy             }
-  #- { key: H,      mods: Command, action: Hide             }
-  #- { key: Q,      mods: Command, action: Quit             }
-  #- { key: W,      mods: Command, action: Quit             }
-
-  - { key: Paste,                   action: Paste                            }
-  - { key: Copy,                    action: Copy                             }
-  - { key: L,        mods: Control, action: ClearLogNotice                   }
-  - { key: L,        mods: Control, chars: "\x0c"                            }
-  - { key: Home,     mods: Alt,     chars: "\x1b[1;3H"                       }
-  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
-  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
-  - { key: End,      mods: Alt,     chars: "\x1b[1;3F"                       }
-  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
-  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
-  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
-  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
-  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
-  - { key: PageUp,   mods: Alt,     chars: "\x1b[5;3~"                       }
-  - { key: PageUp,                  chars: "\x1b[5~"                         }
-  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
-  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
-  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
-  - { key: PageDown, mods: Alt,     chars: "\x1b[6;3~"                       }
-  - { key: PageDown,                chars: "\x1b[6~"                         }
-  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
-  - { key: Back,                    chars: "\x7f"                            }
-  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
-  - { key: Insert,                  chars: "\x1b[2~"                         }
-  - { key: Delete,                  chars: "\x1b[3~"                         }
-  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
-  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
-  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
-  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
-  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
-  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
-  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
-  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
-  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
-  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
-  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
-  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
-  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
-  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
-  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
-  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
-  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
-  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
-  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
-  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
-  - { key: F1,                      chars: "\x1bOP"                          }
-  - { key: F2,                      chars: "\x1bOQ"                          }
-  - { key: F3,                      chars: "\x1bOR"                          }
-  - { key: F4,                      chars: "\x1bOS"                          }
-  - { key: F5,                      chars: "\x1b[15~"                        }
-  - { key: F6,                      chars: "\x1b[17~"                        }
-  - { key: F7,                      chars: "\x1b[18~"                        }
-  - { key: F8,                      chars: "\x1b[19~"                        }
-  - { key: F9,                      chars: "\x1b[20~"                        }
-  - { key: F10,                     chars: "\x1b[21~"                        }
-  - { key: F11,                     chars: "\x1b[23~"                        }
-  - { key: F12,                     chars: "\x1b[24~"                        }
-  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
-  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
-  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
-  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
-  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
-  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
-  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
-  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
-  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
-  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
-  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
-  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
-  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
-  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
-  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
-  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
-  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
-  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
-  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
-  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
-  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
-  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
-  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
-  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
-  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
-  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
-  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
-  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
-  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
-  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
-  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
-  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
-  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
-  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
-  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
-  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
-  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
-  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
-  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
-  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
-  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
-  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
-  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
-  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
-  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
-  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
-  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
-  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
-  - { key: NumpadEnter,             chars: "\n"                              }

git/.gitconfig

@@ -0,0 +1,12 @@
+[user]
+	name = Christian Colglazier
+	email = christian@cacolglazier.com
+[core]
+	editor = emacs
+	excludesFile = ~/.gitignore
+[rerere]
+	enabled = true
+[column]
+	ui = auto
+[branch]
+	sort = -committerdate

git/.gitignore

@@ -0,0 +1,63 @@
+#### Emacs ####
+
+# -*- mode: gitignore; -*-
+*~
+\#*\#
+/.emacs.desktop
+/.emacs.desktop.lock
+*.elc
+auto-save-list
+tramp
+.\#*
+
+# Org-mode
+.org-id-locations
+*_archive
+
+# flymake-mode
+*_flymake.*
+
+# eshell files
+/eshell/history
+/eshell/lastdir
+
+# elpa packages
+/elpa/
+
+# reftex files
+*.rel
+
+# AUCTeX auto folder
+/auto/
+
+# cask packages
+.cask/
+dist/
+
+# Flycheck
+flycheck_*.el
+
+# server auth directory
+/server/
+
+# projectiles files
+.projectile
+
+# directory configuration
+.dir-locals.el
+
+#### vim ####
+# Swap
+[._]*.s[a-v][a-z]
+[._]*.sw[a-p]
+[._]s[a-v][a-z]
+[._]sw[a-p]
+
+# Session
+Session.vim
+
+# Temporary
+.netrwhist
+*~
+# Auto-generated tag files
+tags

gtk/.config/gtk-3.0/settings.ini

@@ -1,6 +1,6 @@
 [Settings]
-gtk-icon-theme-name=Flat-Remix-Blue-Dark
+#gtk-icon-theme-name=Flat-Remix-Blue-Dark
-gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
+#gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
 gtk-font-name=SF Pro Display 14
 gtk-application-prefer-dark-theme=1
 gtk-decoration-layout=0

gtk/.config/gtk-4.0/settings.ini

@@ -1,6 +1,6 @@
 [Settings]
-gtk-icon-theme-name=Flat-Remix-Blue-Dark
+#gtk-icon-theme-name=Flat-Remix-Blue-Dark
-gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
+#gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
 gtk-font-name=SF Pro Display 14
 gtk-application-prefer-dark-theme=1
 gtk-decoration-layout=0

hyprland/.config/hypr/bind-all.conf

@@ -0,0 +1,52 @@
+$mainMod = SUPER
+
+# Keybindings
+bind = $mainMod, return, exec, $terminal
+bind = $mainMod, Q, killactive,
+bind = $mainMod, C, exit,
+bind = $mainMod, E, exec, $fileManager
+bind = $mainMod, V, togglefloating,
+bind = $mainMod, D, exec, $menu
+bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod, J, togglesplit, # dwindle
+bind = $mainMod, L, exec, hyprlock
+bind = $mainMod, F, fullscreen
+
+
+# Move focus window
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+
+# Switch workspaces
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+
+# Move active window to a workspace
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow

hyprland/.config/hypr/bind-framework.conf

@@ -0,0 +1,17 @@
+# Screen brightness controls
+exec-once = light -N 1
+bind = ,XF86MonBrightnessUp, exec, ~/bin/system/backlight-ctl.sh -i
+bind = ,XF86MonBrightnessDown, exec, ~/bin/system/backlight-ctl.sh -d
+
+# Pulse Audio controls
+bind = ,XF86AudioRaiseVolume, exec, amixer set Master 3%+ #increase sound volume
+bind = ,XF86AudioLowerVolume, exec, amixer set Master 3%- #decrease sound volume
+bind = ,XF86AudioMute, exec, amixer set Master toggle # toggle sound
+
+# Media controls
+bind = ,XF86AudioPrev, exec, playerctl previous
+bind = ,XF86AudioPlay, exec, playerctl play-pause
+bind = ,XF86AudioNext, exec, playerctl next
+
+# Lockscreen
+bind = $mainMod, escape, exec, swaylock

hyprland/.config/hypr/env.conf

@@ -0,0 +1,4 @@
+# Programs
+$terminal = alacritty
+$fileManager = dolphin
+$menu = rofi -show combi

hyprland/.config/hypr/general.conf

@@ -0,0 +1,44 @@
+general {
+  gaps_in = 5
+  gaps_out = 5
+  border_size = 2
+  col.active_border = rgba(e91e63ee) rgba(ffcdd2ee) 45deg
+  col.inactive_border = rgba(0288d1aa)
+  layout = dwindle
+  allow_tearing = false
+}
+
+decoration {
+  rounding = 5
+
+  blur {
+    enabled = true
+    size = 3
+    passes = 1
+  } 
+}
+
+animations {
+  enabled = yes
+  bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+  animation = windows, 1, 3, myBezier
+  animation = windowsOut, 1, 7, default, popin 80%
+  animation = border, 1, 10, default
+  animation = borderangle, 1, 8, default
+  animation = fade, 1, 7, default
+  animation = workspaces, 1, 2, default
+}
+
+dwindle {
+  pseudotile = yes
+  preserve_split = yes
+  force_split = 2
+}
+
+master {
+  orientation = right
+}
+
+gestures {
+  workspace_swipe = on
+}

hyprland/.config/hypr/hyprland.conf

@@ -0,0 +1,40 @@
+monitor=eDP-1,2256x1504@60,auto,1.175
+
+# Enviroment
+source = ~/.config/hypr/env.conf
+
+# Startup programs
+source = ~/.config/hypr/startup-all.conf
+source = ~/.config/hypr/startup-framework.conf
+
+# Default env vars
+env = XCURSOR_SIZE,24
+env = QT_QPA_PLATFORMTHEME,qt5ct
+
+source = ~/.config/hypr/general.conf
+
+input {
+  kb_layout = us
+  kb_variant =
+  kb_model =
+  kb_options =
+  kb_rules =
+  follow_mouse = 1
+  touchpad {
+    natural_scroll = yes
+  }
+  sensitivity = 0
+}
+
+xwayland {
+  force_zero_scaling = true
+}
+
+misc {
+  force_default_wallpaper = 0
+}
+
+windowrulev2 = suppressevent maximize, class:.*
+
+source = ~/.config/hypr/bind-all.conf
+source = ~/.config/hypr/bind-framework.conf

hyprland/.config/hypr/startup-all.conf

@@ -0,0 +1,6 @@
+# Password manager update
+exec-once = pass git pull
+
+# Start up script
+exec-once = ~/bin/system/system-start.sh
+

hyprland/.config/hypr/startup-framework.conf

@@ -0,0 +1,2 @@
+exec-once = [workspace 1 silent] brave-browser
+exec-once = [workspace 2 silent] $terminal

i3/.config/i3/desktop.conf

@@ -36,7 +36,7 @@ exec --no-startup-id "workspace $15; exec flatpak run org.signal.Signal"
 
 # Starts Jack for audio
 exec --no-startup-id "workspace $1; exec alacritty"
-exec --no-startup-id sh ~/.config/scripts/audio/system-start-audio.sh
+exec --no-startup-id sh ~/bin/audio/system-start-audio.sh
 
 # Open Google Play Music on workspace 10
 for_window [title="Google Play Music Desktop Player"] move to workspace $ws10
@@ -114,7 +114,7 @@ for_window [class="factorio" title="Factorio*"] move to workspace $wsGames
 for_window [class="factorio" title="Factorio*"] exec --no-startup-id cat ~/.config/g13/factorio.bind > /tmp/g13-0 && sleep .1 && cat ~/.config/g13/factorio.lpbm > /tmp/g13-0
 
 # The side buttons move the desktop around
-bindsym --whole-window button9 exec --no-startup-id python3 ~/.config/scripts/i3-mouse.py back
+bindsym --whole-window button9 exec --no-startup-id python3 ~/bin/i3-mouse.py back
-bindsym --whole-window button8 exec --no-startup-id python3 ~/.config/scripts/i3-mouse.py forward
+bindsym --whole-window button8 exec --no-startup-id python3 ~/bin/i3-mouse.py forward
-bindsym $mod+Tab exec --no-startup-id python3 ~/.config/scripts/i3-mouse.py thumb
+bindsym $mod+Tab exec --no-startup-id python3 ~/bin/i3-mouse.py thumb
 

i3/.config/i3/framework.conf

@@ -45,5 +45,5 @@ exec mako
 # Startup Programs
 exec "swaymsg 'workspace $wsSignal; exec flatpak run org.signal.Signal'"
 exec "swaymsg 'workspace $ws2; exec alacritty'"
-exec "swaymsg 'workspace $ws1; exec firefox'"
+exec "swaymsg 'workspace $ws1; exec brave-browser'"
 

i3/.config/i3/shared.conf

@@ -20,7 +20,7 @@ bindsym $mod+Return exec --no-startup-id alacritty
 bindsym $mod+q kill
 
 # start program launcher
-bindsym $mod+d exec --no-startup-id rofi -show combi 
+bindsym $mod+d exec --no-startup-id rofi -show combi
 # change focus
 bindsym $mod+j focus left
 bindsym $mod+k focus down
@@ -124,9 +124,9 @@ bindsym $mod+Shift+9 move container to workspace $ws9
 bindsym $mod+Shift+0 move container to workspace $ws10
 
 # reload the configuration file
-bindsym $mod+Shift+c exec "sh ~/.config/scripts/i3wm-config-gen.sh"
+bindsym $mod+Shift+c exec "sh ~/bin/i3wm-config-gen.sh"
 # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r exec "sh ~/.config/scripts/i3wm-config-gen.sh" ; restart
+bindsym $mod+Shift+r exec "sh ~/bin/i3wm-config-gen.sh" ; restart
 # exit i3 (logs you out of your X session)
 bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
 
@@ -171,10 +171,7 @@ bindsym $mod+r mode "resize"
 exec_always --no-startup-id setxkbmap -option 'caps:super'
 
 # Startup scripts
-exec --no-startup-id sh ~/.config/scripts/connect-nas.sh
+exec --no-startup-id ~/bin/system/system-start.sh
-exec --no-startup-id systemctl --user start polybar
-exec --no-startup-id systemctl --user restart streamdeck
-exec --no-startup-id waybar &
 
 # class                 border  backgr. text    indicator child_border
 client.focused          $pink   $pink   $pink   $pink     $pink
@@ -196,14 +193,7 @@ default_floating_border normal 3
 bindsym Print exec scrot '%Y:%m:%d:%H:%M:%S.png' -e 'mv $f ~/Pictures/screenshots/'
 bindsym --release $mod+Print exec scrot '%Y:%m:%d:%H:%M:%S.png' -s -e 'mv $f ~/Pictures/screenshots/'
 bindsym $mod+s exec scrot '%Y:%m:%d:%H:%M:%S.png' -e 'mv $f ~/Pictures/screenshots/'
-bindsym --release $mod+Shift+s exec scrot '%Y:%m:%d:%H:%M:%S.png' -s -e 'mv $f ~/Pictures/screenshots/'
+bindsym --release $mod+Shift+s exec grim -g "$(slurp)" - | wl-copy
-
-# Keyring
-exec --no-startup-id dbus-update-activation-environment --all
-exec --no-startup-id /usr/bin/gnome-keyring-daemon --start --components=secrets,pkcs11,ssh
-
-# NextCloud sync client
-exec --no-startup-id nextcloud --background
 
 bindsym $mod+n exec nautilus
 bindsym $mod+m exec nautilus ~/Videos
@@ -229,8 +219,8 @@ for_window [instance="^sun-awt-X11-XDialogPeer$" title="^Complete Installation$"
 
 # Bitwig
 for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] gaps inner set 0; gaps outer set 0
-for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] exec python ~/.config/scripts/audio/synth-power.py -d
+for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] exec python ~/bin/audio/synth-power.py -d
-for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] exec sh ~/.config/scripts/audio/aquamix.sh -d
+for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] exec sh ~/bin/audio/aquamix.sh -d
 for_window [class="^Bitwig Studio$" title="^Bitwig Studio"] exec systemctl --user restart i3wm-close-window.service
 
 #Other

install.sh

@@ -8,17 +8,7 @@ fi
 dotdir=~/dotfiles
 
 #      src                                dest                   sudo
-files=($dotdir/gtk-3.0/settings.ini       ~/.config/gtk-3.0/     'n'
+files=($dotdir/systemd                    ~/.config/             'n'
-       $dotdir/gtk-4.0/settings.ini       ~/.config/gtk-4.0/     'n'
-       $dotdir/i3                         ~/.config/             'n'
-       $dotdir/i3status                   ~/.config/             'n'
-       $dotdir/kitty                      ~/.config/             'n'
-       $dotdir/polybar                    ~/.config/             'n'
-       $dotdir/rofi                       ~/.config/             'n'
-       $dotdir/scripts                    ~/.config/             'n'
-       $dotdir/systemd                    ~/.config/             'n'
-       $dotdir/waybar                     ~/.config/             'n'
-       $dotdir/mako                       ~/.config/             'n'
        $dotdir/settings.conf              ~/.config/             'n')
 
 # arg parser
@@ -119,6 +109,21 @@ function stow_dotfiles {
     stow zsh
     stow alacritty
     stow g13
+    stow git
+    stow gtk
+    stow i3
+    stow i3status
+    stow kitty
+    stow polybar
+    stow rofi
+    stow waybar
+    stow mako
+    stow scripts
+    stow orcaslicer
+}
+
+function install_python_libs {
+    pip install -r requirements.txt
 }
 
 setup
@@ -126,4 +131,5 @@ systemd
 update
 dotfiles
 stow_dotfiles
+install_python_libs
 emacs

orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1702867957

orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json

@@ -0,0 +1,40 @@
+{
+    "fan_max_speed": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture @CR-10s"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture @CR-10s",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}

orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1696802272

orcaslicer/.config/OrcaSlicer/user/default/filament/PETG - Overture.json

@@ -0,0 +1,34 @@
+{
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_flow_ratio": [
+        "0.9025"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}

orcaslicer/.config/OrcaSlicer/user/default/filament/Voron Overture PETG.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1734886086

orcaslicer/.config/OrcaSlicer/user/default/filament/Voron Overture PETG.json

@@ -0,0 +1,13 @@
+{
+    "filament_flow_ratio": [
+        "0.955"
+    ],
+    "filament_settings_id": [
+        "Voron Overture PETG"
+    ],
+    "from": "User",
+    "inherits": "Voron Generic PETG",
+    "is_custom_defined": "0",
+    "name": "Voron Overture PETG",
+    "version": "2.2.0.4"
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1728686097

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "from": "User",
+    "inherits": "Voron 2.4 350 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "name": "AquaVoron 2.4 350 0.4 nozzle",
+    "print_host": "192.168.20.21",
+    "printer_settings_id": "AquaVoron 2.4 350 0.4 nozzle",
+    "version": "1.8.0.0"
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM003
+updated_time = 1728686148

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "from": "User",
+    "inherits": "Voron 2.4 350 0.6 nozzle",
+    "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "name": "AquaVoron 2.4 350 0.6 nozzle",
+    "print_host": "http://192.168.20.21",
+    "printer_settings_id": "AquaVoron 2.4 350 0.6 nozzle",
+    "retraction_length": [
+        "0.1"
+    ],
+    "version": "1.8.0.0"
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695585702

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.json

@@ -0,0 +1,86 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.25 nozzle",
+    "nozzle_diameter": [
+        "0.25"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.5",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.25 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695585702

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json

@@ -0,0 +1,86 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "https://cr10.aquamorph.com",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.4 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1702220626

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json

@@ -0,0 +1,89 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.20.20",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695341948

orcaslicer/.config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json

@@ -0,0 +1,85 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "Ender 3 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.6",
+    "printable_area": [
+        "0x0",
+        "235x0",
+        "235x235",
+        "0x235"
+    ],
+    "printer_settings_id": "Ender 3 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

orcaslicer/.config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1735702877

orcaslicer/.config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.18mm Fine 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1702867957

orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json

@@ -0,0 +1,41 @@
+{
+    "brim_type": "no_brim",
+    "brim_width": "10",
+    "default_acceleration": "0",
+    "enable_support": "1",
+    "from": "User",
+    "gap_infill_speed": "30",
+    "infill_combination": "1",
+    "inherits": "0.20mm Standard @MyKlipper",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "35",
+    "initial_layer_line_width": "137%",
+    "initial_layer_speed": "20",
+    "inner_wall_acceleration": "0",
+    "inner_wall_line_width": "112%",
+    "inner_wall_speed": "35",
+    "internal_solid_infill_line_width": "112%",
+    "internal_solid_infill_speed": "50",
+    "is_custom_defined": "0",
+    "line_width": "100%",
+    "name": "0.20mm Standard CR-10s",
+    "outer_wall_acceleration": "0",
+    "outer_wall_line_width": "80%",
+    "outer_wall_speed": "35",
+    "print_settings_id": "0.20mm Standard CR-10s",
+    "sparse_infill_density": "30%",
+    "sparse_infill_line_width": "107%",
+    "sparse_infill_pattern": "adaptivecubic",
+    "sparse_infill_speed": "60",
+    "support_interface_speed": "30",
+    "support_line_width": "95%",
+    "support_object_xy_distance": "0.75",
+    "support_speed": "30",
+    "support_type": "tree(auto)",
+    "top_surface_acceleration": "0",
+    "top_surface_line_width": "107%",
+    "top_surface_speed": "30",
+    "travel_acceleration": "1500",
+    "travel_speed": "150",
+    "version": "1.6.1.0"
+}

orcaslicer/.config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1736606291

orcaslicer/.config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.30mm Standard 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

polybar/.config/polybar/config

@@ -178,7 +178,7 @@ label-disconnected-underline = ${colors.pink}
 
 [module/mouse-battery]
 type = custom/script
-exec = ~/.config/scripts/get-mouse-battery.sh
+exec = ~/bin/get-mouse-battery.sh
 label =  %output%
 interval = 60
 

scripts/bin/aquaai.sh

@@ -0,0 +1,764 @@
+#!/usr/bin/env bash
+
+# This is a bash script to enable interacting with LLMs via the command line.
+
+#===============================================================================
+
+## Modes
+### Default mode
+# Default mode uses the default prompt and model for AquaAI. It's nothing
+# special.
+### Bash mode
+# This mode will help with writing bash scripts.
+### CLI mode
+# CLI mode prompts the AI with system information and will return terminal
+# commands. If you wish to run the command simply type run and it will end the
+# chat and run the command. You are responsible for validating what the command
+# does before running.
+### Code Review mode
+# This will ask you what changes to look at and will provide a code review of
+# the changes. This mode only works if you are currently in a git repo. It can
+# look at the past few commits as well as changes that have yet to be committed.
+### Reasoning mode
+# This uses the best available reasoning model with the default prompt.
+# Reasoning models take a task and break them up to subtask to pass to
+# specialized models. They are very yappy and take a while to run. Can be good
+# for complex tasks.
+### Regex mode
+# This mode will respond only with regex.
+### Git mode
+# This mode will respond only with git commands. If you wish to run the command
+# simply type run and it will end the chat and run the command. You are
+# responsible for validating what the command does before running.
+
+## Special Input
+### Edit
+# You can type `edit` or `e` as a response and it will open your editor set with
+# the EDITOR variable in your shell session. You can then type your query and
+# save and exit. From there the program will send your query to the AI.
+### Exit
+# You can type `exit` or `q` to end the chat. Personally, I never do this just
+# use C-c.
+### Run
+# If you are in cli mode you can type `run` or `r` and the script will run the
+# given commands on your system. You are playing with fire with this, but fire
+# is useful and fun just be careful.
+### Save
+# You can type `save` or `s` as a response and the chat history will be saved
+# for use at another time. This will also end the chat. Chats are stored in
+# `~/.local/share/aquaai`
+
+## Adding custom modes
+# There are two variables that need to be set to create a custom mode.
+### $selected_model will set the model to be used for the chat.
+### $system_prompt will be the prompt that controls how the AI behaves.
+# introduce more noise into text generation leading to more out there responses.
+#
+# Defaults are set for all these but to define a custom mode you should override
+# at least one of these in a function. Add a custom flag in the switch statement
+# at the bottom of this file and call the function there. See `--bash` as an
+# example of how to do this. From there add some documentation to the
+# print_help() function and then here.
+
+#===============================================================================
+
+# User configurable variables.
+#
+# The following are settings that can be overwritten by environment variables.
+# You can set these in your .bashrc to have them set each time you open a new
+# shell. This script is designed not to be modified so updates can be applied by
+# replacing the file with the newest version.
+#
+#
+# Set the url of the ollama server.
+#
+# export AQUAAI_OLLAMA_URL='192.168.1.156:11434'
+#
+ollama_url=${AQUAAI_OLLAMA_URL:='https://ollama.aquamorph.com'}
+#
+# Set the default model.
+#
+# export AQUAAI_DEFAULT_MODEL='qwen2.5-7b-instruct'
+#
+default_model=${AQUAAI_DEFAULT_MODEL:='qwen2.5:32b-instruct'}
+#
+# Set the default coding model.
+#
+# export AQUAAI_CODING_MODEL='qwen2.5-7b-coder'
+#
+coding_model=${AQUAAI_CODING_MODEL:='qwen2.5-32b-coder'}
+#
+# In multiline mode, users can input multiple lines of text by pressing the
+# Enter key. The message will be sent when the user presses C-d on the keyboard.
+#
+# export AQUAAI_MULTILINE_MODE=true
+#
+multiline_mode=${AQUAAI_MULTILINE_MODE:=false}
+#
+# Enable rich formatting for text output. A formatting program is required for
+# this see below.
+#
+# export AQUAAI_RICH_FORMAT_MODE=true
+#
+rich_format_mode=${AQUAAI_RICH_FORMAT_MODE:=false}
+#
+# Path to the program used for rich formatting. I am currently using streamdown
+# but you are free to use something different as long as it supports streaming
+# text and markdown. Go to the GitHub repo to learn to install streamdown and
+# configure: https://github.com/day50-dev/Streamdown
+#
+# export AQUAAI_RICH_FORMAT_PATH=~/.venv/bin/streamdown
+#
+rich_format_path=${AQUAAI_RICH_FORMAT_PATH:=streamdown}
+#
+# Ignore certificate checks.
+#
+# export AQUAAI_INSECURE_MODE=true
+#
+insecure_mode=${AQUAAI_INSECURE_MODE:=false}
+#===============================================================================
+
+# Constants.
+OLLAMA_URL=${ollama_url}
+CURL_FLAGS='-sN'
+USER=$(whoami)
+DATA_DIR="${HOME}/.local/share/aquaai"
+RESPONSE_FIFO="${DATA_DIR}/.response"
+
+# Colors.
+CLEAR='\033[0m'
+BLUE='\033[0;34m'
+RED='\e[1;31m'
+LIGHT_GRAY='\e[38;5;247m'
+
+# Globals.
+message_history=''
+cli_mode=false
+code_review_start=false
+selected_model=${default_model}
+message_history="[]"
+
+# Error Codes.
+ERROR_NO_SAVEFILE=1
+ERROR_INVALID_TEMP=2
+ERROR_UNKNOWN_OPTION=3
+ERROR_UNKNOWN_MODEL=4
+ERROR_NO_GIT_REPO=5
+ERROR_INVALID_INPUT=6
+ERROR_NO_AUTOSAVE=7
+ERROR_INVALID_SSL=8
+ERROR_UNKNOWN_SSL=9
+
+#===============================================================================
+
+# Set the default agent.
+function set_default_agent() {
+  system_prompt='You are an AI assistant named AquaAI.'
+  system_prompt+=' Follow the users instructions carefully.'
+  system_prompt+=' Respond using extended markdown.'
+  system_prompt+=' Be as concise as possible.'
+}
+
+# Set chat to help with command line questions.
+function set_cli_agent() {
+  local os_version=$(cat /etc/os-release | grep 'PRETTY_NAME' | \
+                       sed 's/PRETTY_NAME=//g' | tr -d '"')
+  system_prompt='You are a large language model trained to assist users with an'
+  system_prompt+=" ${os_version} OS. Only output terminal commands."
+  system_prompt+=' Do not put commands in quotation marks.'
+  system_prompt+=' Do not put commands in markdown.'
+}
+
+# Set chat to help with bash questions.
+function set_bash_agent() {
+  system_prompt='You are a large language model trained to assist users with'
+  system_prompt+=' POSIXs bash. Format output for view in a command line. Do'
+  system_prompt+=' not put commands in quotation marks. Use double spaces and'
+  system_prompt+=' the function key word. Write documentation for a function'
+  system_prompt+=' before the function declaration.'
+}
+
+# Set ai to help with code reviews.
+function set_code_review_agent() {
+  system_prompt='You are a senior software engineer performing a code review'
+  system_prompt+=' for a colleague.'
+  system_prompt+=''
+  system_prompt+='Your report should have the following format:'
+  system_prompt+='# Typos'
+  system_prompt+='List of all typos you find.'
+  system_prompt+='# Formatting and Readability Issues'
+  system_prompt+='List of all formatting and readability issues you find.'
+  system_prompt+='# Security Issues'
+  system_prompt+='List of all security issues you find.'
+  system_prompt+='# Other'
+  system_prompt+='List of all other issues you find.'
+}
+
+# Set chat to help with git.
+function set_git_agent() {
+  system_prompt='You are a large language model trained to assist users with'
+  system_prompt+=' git. Only output terminal commands.'
+  system_prompt+=' Do not put commands in quotation marks.'
+}
+
+# Set chat to help with regex.
+function set_regex_agent() {
+  system_prompt='You are a large language model trained to assist users with'
+  system_prompt+=' regex. Only output a single regex expression.'
+  system_prompt+=' Use BRE and ERE regex.'
+  system_prompt+=' Do not put commands in quotation marks.'
+}
+
+#===============================================================================
+
+# Set the default coding model.
+function set_coding_model() {
+  selected_model=${coding_model}
+}
+
+# Set the default reasoning model.
+function set_reasoning_model() {
+  selected_model='deepseek-r1:8b'
+}
+
+#===============================================================================
+
+# Print out help menu.
+function print_help() {
+  echo 'Interact with the AquaAI via the command line.'
+  echo ''
+  echo '--delete         - delete a chat from history'
+  echo '-l --list        - list available models'
+  echo '--load           - load a chat from history'
+  echo '--restore        - load last auto saved chat'
+  echo ''
+  echo '--bash           - help with bash'
+  echo '--cli            - help with command line'
+  echo '--code-review    - code review of a git project'
+  echo '-r --reason      - help with a reasoning model'
+  echo '--regex          - help with regex'
+  echo '--git            - help with git'
+}
+
+# Print out error message.
+function print_error() {
+  local msg=${1}
+  printf "${RED}ERROR: ${msg}\n${CLEAR}"
+}
+
+# Check if a given program is installed on the system.
+function check_program() {
+  if ! command -v ${1} 2>&1 >/dev/null; then
+    print_error "${1} not found. Please install ${1}."
+    exit ${ERROR_DEPENDENCY}
+  fi
+}
+
+# Check system for required programs.
+function check_requirements() {
+  check_program curl
+  check_program jq
+  check_program fzf
+  if [ "${rich_format_mode}" == true ]; then
+    check_program ${rich_format_path}
+  fi
+}
+
+# Get list of available models.
+function get_models() {
+  curl "${OLLAMA_URL}/api/tags" ${CURL_FLAGS}
+}
+
+# Print list of models.
+function print_models() {
+  get_models | jq -r '.models[].model' | column -t -s $'\t'
+}
+
+# Print message variable.
+function print_debug_message_history() {
+  echo ${message_history}
+}
+
+# Check if the model exists.
+function check_if_model_exists() {
+  local model=${1}
+  local model_list=($(get_models | jq -r '.models[].model'))
+
+  for m in "${model_list[@]}"; do
+    if [[ "$m" == "$model" ]]; then
+      return 0
+    fi
+  done
+
+  print_error "model ${model} does not exists."
+  exit ${ERROR_UNKNOWN_MODEL}
+}
+
+# Convert string to a safe format for later use.
+function convert_to_safe_text() {
+  echo "${1}" | jq -sR @json
+}
+
+# Set the text output color for user input.
+function set_user_color() {
+  printf "${LIGHT_GRAY}"
+}
+
+# Set the text output color for ai response.
+function set_ai_color() {
+  printf "${CLEAR}"
+}
+
+# Set text color to defaults.
+function set_clear_color() {
+  printf "${CLEAR}"
+}
+
+# Print the header for the ai message
+function print_ai_start_message() {
+  echo -e "\U1F916 AquaAI"
+}
+
+# Print the header for the ai message
+function print_user_start_message() {
+  echo -e "\U1F464 ${USER}"
+}
+
+# Opens the user's preferred text editor to allow them to input text.
+function editor_input() {
+  local editor=${EDITOR:=nano}
+  local temp_file=$(mktemp)
+
+  ${editor} ${temp_file}
+  local user_input=$(<"$temp_file")
+  rm "$temp_file"
+
+  msg=${user_input}
+}
+
+# Check if current directory is managed by git.
+function check_git_directory() {
+  if ! git rev-parse --is-inside-work-tree &> /dev/null; then
+    print_error 'The current directory is not inside a git repository.'
+    exit ${ERROR_NO_GIT_REPO}
+  fi
+}
+
+# Asks the user if they want to include staged git change data.
+function gather_staged_changes() {
+  echo -n 'Do you want to include staged changes? (y/n)? '
+  read response
+
+  if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+    msg+=$(git diff --cached --patch)
+  fi
+}
+
+# Ask the user if they want to include changes that have not been committed.
+function gather_uncommitted_changes() {
+  echo -n 'Do you want to include the changes'
+  echo -n ' you have yet to commit or stash (y/n)? '
+  read response
+
+  if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+    changes=$(git diff)
+    msg+=${changes}
+  fi
+}
+
+# Ask the user for number of commit changes to include in code review.
+# Returns a list of changes for the given number of commits.
+function gather_commit_changes() {
+  echo -n 'How many previous commits do you want to include? '
+  local count
+  read count
+
+  # Allow hitting enter as a no response.
+  if [ -z "$count" ]; then
+    return
+  fi
+
+  # Validate that the input is a positive integer.
+  if ! [[ "$count" =~ ^[0-9]+$ ]] || [ "$count" -lt 0 ]; then
+    print_error 'Please enter a positive integer for the number of commits.'
+    exit ${ERROR_INVALID_INPUT}
+  fi
+
+  hashes=$(git log --format=%H -n ${count})
+  for h in ${hashes}; do
+    commit_message=$(git show ${h})
+    msg+="${commit_message}"$'\n'
+  done
+}
+
+# Create fifo for chat responses.
+function create_response_fifo() {
+  create_data_dir
+  if [ ! -p ${RESPONSE_FIFO} ]; then
+    mkfifo ${RESPONSE_FIFO}
+  fi
+}
+
+# Delete fifo for chat responses.
+function remove_response_fifo() {
+  if [ -p ${RESPONSE_FIFO} ]; then
+    rm ${RESPONSE_FIFO}
+  fi
+}
+
+# Create response trap to allow user to stop AquaAI.
+function create_response_trap() {
+  trap 'echo "AquaAI has been interrupted...";' SIGINT
+}
+
+# Remove response trap to allow user to exit program.
+function remove_response_trap() {
+  trap - SIGINT
+}
+
+# Get the first message from a saved chat.
+function get_first_chat() {
+  local file_path=${1}
+  source <(cat ${file_path} | grep message_history)
+  message_history=$(echo $message_history | \
+                      jq -r '[.[] | select(.role == "user")][0].content' \
+                      2>/dev/null | sed 's/^"//')
+  echo -e $message_history | sed 's/"$//' | tr -d '\n' | cut -c 1-80 \
+    | sed ':a;N;$!ba;s/\n//g'
+}
+
+# Get an array of all saved chat files.
+function get_save_files() {
+  save_files=()
+  create_data_dir
+
+  for f in $(find "$DATA_DIR" -type f -name "*.chat"); do
+    save_files+=("${f}")
+  done
+}
+
+# Create the data directory if it does not exist.
+function create_data_dir() {
+  if [ ! -d "$DATA_DIR" ]; then
+    mkdir -p "$DATA_DIR"
+  fi
+}
+
+# Save the current chat to a file.
+function save_chat() {
+  create_data_dir
+  local filename=${1}
+
+ if [ -z "$filename" ]; then
+    print_error 'No filename provided.'
+    exit ${ERROR_NO_SAVEFILE}
+  fi
+
+  declare -p selected_model system_prompt \
+          message_history cli_mode > "${DATA_DIR}/${filename}"
+}
+
+# Save the current chat to autosave.
+function autosave() {
+  save_chat 'autosave.chat'
+  echo 'Chat has been auto saved'
+}
+
+# Find all .chat files in DATA_DIR and use fzf to select one.
+function select_chat_file() {
+  selected_file=$(select_chat_with_fzf)
+
+  if [ -z "$selected_file" ]; then
+    echo 'No file selected.'
+    exit ${ERROR_NO_SAVEFILE}
+  fi
+}
+
+# Delete .chat files in DATA_DIR.
+function delete_chat_file() {
+  selected_file=$(select_chat_with_fzf)
+
+  if [ -z "$selected_file" ]; then
+    echo 'No file selected.'
+    exit ${ERROR_NO_SAVEFILE}
+  else
+    local pretty_name=$(get_first_chat ${selected_file})
+    echo -n "do you want to delete '${pretty_name}' (y/n)? "
+    read response
+    if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+      rm -- "${selected_file}"
+      echo "Deleted '${pretty_name}'"
+    fi
+  fi
+}
+
+# Select saved chat with fzf program.
+function select_chat_with_fzf() {
+  get_friendly_save_names
+
+  local selected_index=$(printf "%s\n" "${friendly_save_files[@]}" \
+                           | cat -n | fzf --with-nth 2.. \
+                           | awk '{print $1}')
+  selected_index=$((${selected_index}-1))
+
+  if [[ -n $selected_index ]]; then
+    echo "${save_files[selected_index]}"
+  fi
+}
+
+# Get an array of the first message in saved chats.
+function get_friendly_save_names() {
+  get_save_files
+  friendly_save_files=()
+  for f in "${save_files[@]}"; do
+    friendly_save_files+=("$(get_first_chat ${f})")
+  done
+}
+
+# Validate site certificate.
+function check_cert() {
+  curl ${OLLAMA_URL} ${CURL_FLAGS} 2>&1 >/dev/null
+  local ec=$?
+  if [ "${ec}" == '60' ]; then
+    print_error 'unable to get local issuer certificate.'
+    echo 'Install the certificate on the system.'
+    exit ${ERROR_INVALID_SSL}
+  elif [ "${ec}" != '0' ]; then
+    print_error 'unknown ssl error.'
+    exit ${ERROR_UNKNOWN_SSL}
+  fi
+}
+
+# Update chat history
+function update_history() {
+  local role="$1"
+  local content="$2"
+  message_history=$(echo "$message_history" \
+                     | jq --arg role "$role" --arg content \
+                     "$content" '. + [{"role": $role, "content": $content}]')
+}
+
+# Read input from the user.
+function read_user_input() {
+  if [ "${multiline_mode}" == true ]; then
+    msg=$(awk '{if ($0 == "END") exit; else print}')
+  elif [ "${code_review_start}" == true ]; then
+    check_git_directory
+    msg=''
+    gather_uncommitted_changes
+    gather_staged_changes
+    gather_commit_changes
+    code_review_start=false
+  else
+    read msg
+  fi
+}
+
+# Handle input related to CLI mode.
+function handle_cli_mode() {
+  # Check for cli mode
+  if [ ${cli_mode} == true ]; then
+    if [[ -z $msg || $msg == 'run' || $msg == 'r' ]]; then
+      set_clear_color
+      autosave
+      echo
+      local commands=()
+      # Get a list of commands
+      while IFS= read -r line; do
+        commands+=("${line}")
+      done <<< "$last_cmd"
+      for c in "${commands[@]}"; do
+        # Using eval to handle commands that include pipes.
+        if [[ "${c}" == *'|'* ]]; then
+          eval "${c}"
+        else
+          ${c}
+        fi
+      done
+      exit 0
+    fi
+  fi
+}
+
+# Check for editor request.
+function handle_edit() {
+  if [[ $msg == 'edit' || $msg == 'e' ]]; then
+    editor_input
+    set_user_color
+    echo "${msg}"
+  fi
+}
+
+# Check for debug command.
+function handle_debug() {
+  if [[ $msg == 'debug' ]]; then
+    echo "model=${selected_model}"
+    print_debug_message_history | jq
+    return 1
+  fi
+  return 0
+}
+
+# Check for save command.
+function handle_save() {
+  if [[ $msg == 'save' || $msg == 's' ]]; then
+    echo "Saving chat history"
+    save_chat "$(date +%Y%m%d%H%M%S).chat"
+    exit 0
+  fi
+}
+
+# Chat converstation loop.
+function chat_loop() {
+  check_if_model_exists ${selected_model}
+  update_history 'system' "$system_prompt"
+  while true; do
+    chat
+  done
+}
+
+# Main chat loop.
+function chat() {
+  # Get user input.
+  set_user_color
+  print_user_start_message
+  read_user_input
+  echo
+
+  # Handle user input.
+  local rc=0
+  handle_edit
+  handle_cli_mode
+  handle_debug
+  handle_save
+  rc=$((rc + $?))
+  if [ "$rc" -ne 0 ]; then
+    return
+  fi
+  update_history 'user' "${msg}"
+
+  # Prepare JSON payload.
+  JSON_PAYLOAD=$(jq -n \
+    --arg model "$selected_model" \
+    --argjson messages "$message_history" \
+      '{model: $model,  messages: $messages, stream: true}')
+
+  set_ai_color
+  print_ai_start_message
+
+  create_response_fifo
+  create_response_trap
+  # Render to console.
+  if [ "${rich_format_mode}" == true ]; then
+    cat ${RESPONSE_FIFO} | ${rich_format_path} &
+  else
+    cat ${RESPONSE_FIFO} &
+  fi
+  local response=$(curl -sN "$OLLAMA_URL/api/chat" \
+    -d "$JSON_PAYLOAD" \
+    | stdbuf -o0 jq -j '.message.content // empty' \
+    | tee ${RESPONSE_FIFO})
+  wait
+  # Newline for AI response.
+  if [ "${rich_format_mode}" != true ]; then
+    echo
+  fi
+  # One line reponses do not print out when formatted with Streamdown.
+  if [[ "$rich_format_path" == *"streamdown"* && \
+    "${rich_format_mode}" == true ]]; then
+    local wc=$(echo "${response}" | wc -l)
+    if [ ${wc} -eq 1 ]; then
+      echo "${response}"
+    fi
+  fi
+  remove_response_trap
+  remove_response_fifo
+  echo
+  update_history "assistant" "${response}"
+  last_cmd="${response}"
+}
+
+#===============================================================================
+
+check_requirements
+if [ "${insecure_mode}" == true ]; then
+  CURL_FLAGS+=' -k'
+else
+  check_cert
+fi
+cmd=chat_loop
+set_default_agent
+
+# Check arguments
+for i in "$@"; do
+  case $i in
+    -h|--help)
+      cmd=print_help
+      ;;
+    -l|--list)
+      cmd=print_models
+      ;;
+    --delete)
+      delete_chat_file
+      exit 0
+      ;;
+    --load)
+      select_chat_file
+      source ${selected_file}
+      cmd=chat_loop
+      ;;
+    --restore)
+      if [ ! -e "${DATA_DIR}/autosave.chat" ]; then
+        print_error 'auto save does not exit'
+        exit ${ERROR_NO_AUTOSAVE}
+      fi
+      source "${DATA_DIR}/autosave.chat"
+      cmd=chat_loop
+      ;;
+    # Modes
+    --bash)
+      set_coding_model
+      set_bash_agent
+      cmd=chat_loop
+      ;;
+    --cli)
+      set_coding_model
+      set_cli_agent
+      cmd=chat_loop
+      cli_mode=true
+      rich_format_mode=false
+      ;;
+    --code-review)
+      set_coding_model
+      set_code_review_agent
+      code_review_start=true
+      cmd=chat_loop
+      ;;
+    --git)
+      set_coding_model
+      set_git_agent
+      cmd=chat_loop
+      cli_mode=true
+      rich_format_mode=false
+      ;;
+    -r|--reason)
+      set_reasoning_model
+      cmd=chat_loop
+      ;;
+    --regex)
+      set_coding_model
+      set_regex_agent
+      cmd=chat_loop
+      rich_format_mode=false
+      ;;
+    # Other
+    -*|--*)
+      echo "Unknown option ${i}"
+      print_help
+      exit ERROR_UNKNOWN_OPTION
+      ;;
+  esac
+done
+
+${cmd}
+

scripts/bin/audio/system-start-audio.sh

@@ -26,8 +26,8 @@ function fixPulse() {
 function launchi3() {
     if [ -z "$skipi3" ]; then
 	echo Opening i3wm sound workspaces
-	sleep .1 && i3-msg 'workspace 5; exec firefox'
+	sleep .1 && i3-msg 'workspace 5; exec brave-browser'
-	sleep 5.1 && python ~/.config/scripts/start-firefox.py
+	#sleep 5.1 && python ~/bin/start-firefox.py
     fi
 }
 
@@ -59,6 +59,13 @@ function renameInterface() {
     done
 }
 
+# Restart the Wireplumber service.
+function restartWireplumber() {
+    systemctl --user stop wireplumber
+    sleep 5
+    systemctl --user restart wireplumber
+}
+
 # arg parser
 for arg in "$@"
 do
@@ -70,20 +77,12 @@ done
 
 # Wire sinks
 setupSinks
-connectSinks
-status=$?
-while [[ $status -eq 0 ]]; do
-    echo "Connecting Sinks"
-    connectSinks
-    status=$?
-    sleep 1
-done
-
-# Rename Audio Devices
-#renameInterface
 
 # Eurorack audio interface
-sh ~/.config/scripts/audio/es9start.sh
+sh ~/bin/audio/es9start.sh
 
 launchi3
 systemctl --user restart polybar
+sleep 5
+restartWireplumber
+

scripts/bin/installers/blackmagic-parser.py

@@ -33,9 +33,9 @@ def getURLId(url):
 # getURLVersion() returns the url version number.
 def getURLVersion(url):
     if 'Beta' in url['downloadTitle']:
-        beta = re.search('Beta \d+', url['downloadTitle'])
+        beta = re.search('Beta \\d+', url['downloadTitle'])
         if beta:
-            beta = re.search('\d+', beta.group()).group()
+            beta = re.search('\\d+', beta.group()).group()
     else:
         beta = '99'
     return '{}.{}.{}.{}'.format(url['major'], url['minor'], url['releaseNum'], beta)

scripts/bin/installers/dragonframe-install.sh

@@ -5,11 +5,19 @@
 # Import library
 source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
 
-dragonframe=$(searchProgramInstalled dragonframe | \
+# Fix issue with shared library files.
+function postInstallFix() {
+  sudo rm /opt/dragonframe2024/lib/libtiff.so.5
+  sudo rm /opt/dragonframe2024/lib/libudev.so.0
+  sudo ln -s -f /lib64/libudev.so.1 /opt/dragonframe2024/lib/libudev.so.0
+}
+
+dragonframe=$(searchProgramInstalled dragonframe20* | \
 		  awk 'END {print $(NF-2), $(NF-1), $NF}')
 dragonframeVersion=$(echo $dragonframe | awk '{print $2;}' | filterVersion)
+agent='Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:104.0) Gecko/20100101 Firefox/104.0'
 url=$(curl -s https://www.dragonframe.com/downloads/ \
-	   -A "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:104.0) Gecko/20100101 Firefox/104.0" | \
+	   -A $agent | \
 	  grep .rpm | grep downloadButton | grep downloadButton | \
 	  grep -io 'https://[a-z0-9+-._/]*.rpm' | head -n 1)
 urlVersion=$(echo $url | awk -F "-" '{ print $2 }')
@@ -21,8 +29,13 @@ echo Installing Dragonframe $urlVersion
 # Setting up and downloading package
 mkdir -p ~/Downloads/installers/dragonframe
 cd ~/Downloads/installers/dragonframe
-wget $url
+
+
+installer=$(basename "$url")
+curl -s $url \
+     -A $agent \
+     -o $installer
 
 # Install package
-sudo dnf install $(basename "$url") -y
+sudo dnf install $installer -y
 

scripts/bin/installers/reaper-install.sh

@@ -7,10 +7,10 @@ source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
 
 # Get download url
 reaperVersion=$(head /opt/REAPER/whatsnew.txt | filterVersion)
-reaperSite='https://www.reaper.fm/'
+reaperSite='https://www.reaper.fm'
-downloadPage=$(curl -s ${reaperSite}download.php)
+downloadPage=$(curl -s "${reaperSite}/download.php")
 urlVersion=$(echo "$downloadPage" | grep -A 2 'Linux x86_64' | filterVersion)
-url=$reaperSite$(echo "$downloadPage" | grep linux_x86_64 | grep -Po '(?<=href=")[^"]*')
+url="${reaperSite}/$(echo "$downloadPage" | grep linux_x86_64 | grep -Po '(?<=href=")[^"]*'| head -n 1)"
 
 checkUptoDate Reaper $reaperVersion $urlVersion
 

scripts/bin/installers/resolve-install.sh

@@ -5,6 +5,20 @@
 # Import library
 source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
 
+# Graphics card fix
+function graphicsCardFix() {
+  sudo rm /etc/OpenCL/vendors/mesa.icd
+  sudo rm /etc/OpenCL/vendors/pocl.icd
+}
+
+# gLib fix
+function glibFix() {
+  sudo mkdir /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libglib-2.0.so* /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgio-2.0.so*  /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgmodule-2.0.so* /opt/resolve/libs/_disabled
+}
+
 versionFile=/opt/resolve/version.txt
 
 resolveVersion=$(cat /opt/resolve/docs/ReadMe.html | grep 'DaVinci Resolve Studio' | filterVersion)
@@ -77,18 +91,12 @@ if [ ! -f ./*${installerName}_Linux.run ]; then
 fi
 echo "Installing ./*${installerName}_Linux.run"
 chmod +x ./*${installerName}_Linux.run
-sudo ./*${installerName}_Linux.run -i -y
+sudo SKIP_PACKAGE_CHECK=1 ./*${installerName}_Linux.run -i -y
 
 # Version number backup
 sudo echo $urlVersion > $versionFile
 
-# Graphics card fix
+glibFix
-sudo rm /etc/OpenCL/vendors/mesa.icd
-sudo rm /etc/OpenCL/vendors/pocl.icd
-
-# gLib fix
-sudo mkdir /opt/resolve/libs/_disabled
-sudo mv /opt/resolve/libs/libglib-2.0.so* /opt/resolve/libs/_disabled
 
 # Keyboard mapping fix
 setxkbmap -option 'caps:super'

scripts/bin/launch-stocks-tracker.py

@@ -26,5 +26,5 @@ def closed():
      return False
 if (openToday() and not closed()):
     print("Open")
-    os.system("i3-msg 'workspace 10; exec firefox --new-window robinhood.com \
+    os.system("i3-msg 'workspace 10; exec librewolf --new-window robinhood.com \
         && sleep 1 && firefox -new-tab app.webull.com/watch'")

scripts/bin/start-firefox.py

@@ -54,32 +54,32 @@ def isProgramRunning(name, windows, workspace):
     return False
 
 
-def isPagesLoaded(firefoxWindows):
+def isPagesLoaded(windows):
-    for w in firefoxWindows:
+    for w in windows:
         if 'http' not in w.name:
             return True
     return True
 i3 = Connection()
-firefoxWindows = filterWindowsByClass('firefox', getWindows(i3))
+windows = filterWindowsByClass('librewolf-default', getWindows(i3))
 
-while(not isPagesLoaded(firefoxWindows)):
+while(not isPagesLoaded(windows)):
     time.sleep(0.1)
 
 switchWorkspace('10')
 switchWorkspace('1')
 
 # Music
-if not isProgramRunning(['music.youtube.com'], firefoxWindows, '10'):
+if not isProgramRunning(['music.youtube.com'], windows, '10'):
-    launchProgram('firefox --new-window music.youtube.com', '10')
+    launchProgram('librewolf --new-window music.youtube.com', '10')
 
 # Stocks
-if not isProgramRunning(['Robinhood', 'Webull'], firefoxWindows, '10'):
+if not isProgramRunning(['Robinhood', 'Webull'], windows, '10'):
-    os.system('python ~/.config/scripts/launch-stocks-tracker.py')
+    os.system('python ~/bin/launch-stocks-tracker.py')
 
 # Videos
 if not isProgramRunning(['odysee.com', 'lbry.tv', 'www.youtube.com',
                          ' - YouTube', 'hulu.com', 'netflix.com',
                          'disneyplus.com', 'tv.youtube.com'],
-                        firefoxWindows, '10'):
+                        windows, '10'):
-    launchProgram('firefox --new-window youtube.com/feed/subscriptions', '10')
+    launchProgram('librewolf --new-window youtube.com/feed/subscriptions', '10')
-    launchProgram('sleep 1 && firefox -new-tab odysee.com/$/following', '10')
+    launchProgram('sleep 1 && librewolf -new-tab odysee.com/$/following', '10')

scripts/bin/system/backlight-ctl.sh

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+
+# Print help info.
+function print_help() {
+  echo 'Control the backlight brightness with animation.'
+  echo
+  echo '-i    -- increase brightness'
+  echo '-d    -- decrease brightness'
+}
+
+# Increase backlight brightness.
+function increase() {
+  run_animation 'light -A 0.1'
+}
+
+# Decrease backlight brightness.
+function decrease() {
+  run_animation 'light -U 0.1'
+}
+
+# Run animation task.
+function run_animation() {
+  local cmd="${1}"
+  i=0
+  while [ $i -lt 50 ]; do
+    ${cmd}
+    sleep 0.01
+    ((i = i + 1));
+  done
+}
+
+
+# Check arguments
+for i in "$@"; do
+  case $i in
+    -h|--help)
+      print_help
+      exit 0
+      ;;
+    -i)
+      increase
+      ;;
+    -d)
+      decrease
+      ;;
+    *)
+      print_help
+      exit 1
+      ;;
+  esac
+done
+

scripts/bin/system/system-start.sh

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+
+# Update Passwords
+pass git pull
+
+# Desktop
+~/bin/connect-nas.sh
+systemctl --user start polybar
+systemctl --user restart streamdeck
+waybar &
+/usr/libexec/polkit-gnome-authentication-agent-1 &
+
+# Keyring
+dbus-update-activation-environment --all
+/usr/bin/gnome-keyring-daemon --start --components=secrets,pkcs11,ssh
+
+# NextCloud sync client
+nextcloud --background &

scripts/bin/update.sh

@@ -28,6 +28,11 @@ function flatpakUpdate {
     fi
 }
 
+# Appimage Updater
+function appimageUpdate {
+    am update
+}
+
 # Checks if a program is installed and if it is runs an updater script
 function updateProgram {
     if command -v $1 &> /dev/null; then
@@ -39,12 +44,13 @@ function updateProgram {
 function manualUpdate {
     if command -v dnf &> /dev/null; then
 	echo Updating manually installed programs...
-	updateProgram bitwig-studio ~/.config/scripts/installers/bitwig-install.sh &
+	SCRIPT_PATH="$HOME/bin/installers"
-	updateProgram /opt/dragonframe5/bin/Dragonframe ~/.config/scripts/installers/dragonframe-install.sh &
+	updateProgram bitwig-studio $SCRIPT_PATH/bitwig-install.sh &
-	updateProgram reaper ~/.config/scripts/installers/reaper-install.sh &
+	updateProgram /opt/dragonframe5/bin/Dragonframe $SCRIPT_PATH/dragonframe-install.sh &
-	updateProgram /opt/resolve/bin/resolve ~/.config/scripts/installers/resolve-install.sh &
+	updateProgram reaper $SCRIPT_PATH/reaper-install.sh &
-	updateProgram /opt/keeweb/keeweb ~/.config/scripts/installers/keeweb-install.sh &
+	updateProgram /opt/resolve/bin/resolve $SCRIPT_PATH/resolve-install.sh &
-	updateProgram yabridgectl ~/.config/scripts/installers/yabridge-install.sh &
+	updateProgram /opt/keeweb/keeweb $SCRIPT_PATH/keeweb-install.sh &
+	updateProgram yabridgectl $SCRIPT_PATH/yabridge-install.sh &
 	wait
     fi
 }
@@ -54,4 +60,7 @@ aptUpdate
 echo ''
 flatpakUpdate
 echo ''
+appimageUpdate
+echo ''
 manualUpdate
+

systemd/user/polybar.service

@@ -4,5 +4,5 @@ Description=Polybar
 [Service]
 Type=oneshot
 RemainAfterExit=true
-ExecStart=%h/.config/scripts/desktop/polybar-start.sh
+ExecStart=%h/bin/desktop/polybar-start.sh
 ExecStop=killall -q polybar

waybar/.config/waybar/config

@@ -3,8 +3,8 @@
     "output": ["DVI-D-0", "LVDS-1", "eDP-1"],
     "position": "top",
     "height": 35, // Waybar height (to be removed for auto height)
-    "modules-left": ["sway/workspaces", "sway/mode", "custom/media"],
+    "modules-left": ["hyprland/workspaces", "hyprland/mode", "sway/workspaces", "sway/mode", "custom/media"],
-    "modules-center": ["sway/window"],
+    "modules-center": ["hyprland/window", "sway/window"],
     "modules-right": ["pulseaudio", "network", "backlight", "battery", "tray", "clock"],
     // Modules configuration
      "sway/workspaces": {
@@ -23,6 +23,22 @@
              "default": ""
          }
      },
+     "hyprland/workspaces": {
+         "disable-scroll": true,
+         "all-outputs": true,
+         "format": "{icon}",
+         "format-icons": {
+             "1": "1",
+             "2": "",
+             "3": "3",
+             "4": "4",
+             "5": "5",
+	     "13": "♫",
+             "urgent": "",
+             "focused": "",
+             "default": ""
+         }
+     },
     "keyboard-state": {
         "numlock": true,
         "capslock": true,
@@ -35,6 +51,9 @@
     "sway/mode": {
         "format": "<span style=\"italic\">{}</span>"
     },
+    "hyprland/mode": {
+        "format": "<span style=\"italic\">{}</span>"
+    },
     "tray": {
         // "icon-size": 21,
         "spacing": 10

wireplumber/.config/wireplumber/main.lua.d/91-user-scripts.lua

@@ -1 +0,0 @@
-load_script("/home/aqua/.config/wireplumber/scripts/auto-connect-ports.lua")

wireplumber/.config/wireplumber/wireplumber.conf.d/99-user-scripts.conf

@@ -0,0 +1,13 @@
+wireplumber.components = [
+  {
+    name = auto-connect-ports.lua, type = script/lua
+    provides = custom.auto-connect-ports
+  }
+]
+
+wireplumber.profiles = {
+  main = {
+    custom.auto-connect-ports = required
+  }
+}
+

wireplumber/.local/share/wireplumber/scripts/auto-connect-ports.lua

@@ -7,7 +7,7 @@
 -- Link two ports together
 function link_port(output_port, input_port)
   if not input_port or not output_port then
-    return false
+    return nil
   end
 
   local link_args = {
@@ -29,7 +29,7 @@ function link_port(output_port, input_port)
   local link = Link("link-factory", link_args)
   link:activate(1)
 
-  return true
+  return link
 end
 
 -- Automatically link ports together by their specific audio channels.
@@ -72,6 +72,8 @@ function auto_connect_ports(args)
     }
   }
 
+  local links = {}
+
   local input_om = ObjectManager {
     Interest {
       type = "port",
@@ -96,22 +98,40 @@ function auto_connect_ports(args)
         Constraint { "port.direction", "equals", "in" }
       }
     }
-
   end
 
   function _connect()
     local delete_links = unless and unless:get_n_objects() > 0
 
-    print("Delete links", delete_links)
+    if delete_links then
+      for _i, link in pairs(links) do
+        link:request_destroy()
+      end
 
-    for output_name, input_name in pairs(args.connect) do
+      links = {}
-      local output = output_om:lookup { Constraint { "audio.channel", "equals", output_name } }
+
-      local input =  input_om:lookup { Constraint { "audio.channel", "equals", input_name } }
+      return
+    end
+
+    for output_name, input_names in pairs(args.connect) do
+      local input_names = input_names[1] == nil and { input_names } or input_names
 
       if delete_links then
-        delete_link(all_links, output, input)
       else
-        link_port(output, input)
+        -- Iterate through all the output ports with the correct channel name
+        for output in output_om:iterate { Constraint { "audio.channel", "equals", output_name } } do
+          for _i, input_name in pairs(input_names) do
+            -- Iterate through all the input ports with the correct channel name
+            for input in input_om:iterate { Constraint { "audio.channel", "equals", input_name } } do
+              -- Link all the nodes
+              local link = link_port(output, input)
+
+              if link then
+                table.insert(links, link)
+              end
+            end
+          end
+        end
       end
     end
   end
@@ -131,25 +151,15 @@ function auto_connect_ports(args)
   end
 end
 
-
 -- pw-cli list-objects | grep object.path
 
 -- Connect to speakers
 auto_connect_ports {
   output = Constraint { "object.path", "matches", "speakers:*" },
-  input = Constraint { "object.path", "matches", "alsa:pcm:2:hw:2,0:playback:*" },
+  input = Constraint { "object.path", "matches", "alsa:acp:C8Pre:0:playback:*" },
   connect = {
     ["FL"] = "AUX0",
     ["FR"] = "AUX1"
   }
 }
 
--- Connect to mic
-auto_connect_ports {
-  output = Constraint { "object.path", "matches", "alsa:pcm:2:hw:2,0:capture:*" },
-  input = Constraint { "object.path", "matches", "sm7b-processed:" },
-  connect = {
-    ["AUX0"] = "FL",
-    ["AUX1"] = "FR"
-  }
-}