Fix Davinci Resolve installer

alacritty/.config/alacritty/alacritty.toml

@@ -1,5 +1,3 @@
-live_config_reload = true
-working_directory = "None"
 
 [bell]
 animation = "EaseOutExpo"
@@ -602,3 +600,7 @@ lines = 0
 [window.padding]
 x = 4
 y = 4
+
+[general]
+live_config_reload = true
+working_directory = "None"

orcaslicer/.config/OrcaSlicer/user/default/filament/Voron Overture PETG.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1734886086

orcaslicer/.config/OrcaSlicer/user/default/filament/Voron Overture PETG.json

@@ -0,0 +1,13 @@
+{
+    "filament_flow_ratio": [
+        "0.955"
+    ],
+    "filament_settings_id": [
+        "Voron Overture PETG"
+    ],
+    "from": "User",
+    "inherits": "Voron Generic PETG",
+    "is_custom_defined": "0",
+    "name": "Voron Overture PETG",
+    "version": "2.2.0.4"
+}

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info

@@ -1,4 +1,4 @@
-sync_info = create
+sync_info = update
 user_id = 
 setting_id = 
 base_id = GM001

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json

@@ -2,7 +2,9 @@
     "from": "User",
     "inherits": "Voron 2.4 350 0.4 nozzle",
     "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
     "name": "AquaVoron 2.4 350 0.4 nozzle",
+    "print_host": "192.168.20.21",
     "printer_settings_id": "AquaVoron 2.4 350 0.4 nozzle",
     "version": "1.8.0.0"
 }

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info

@@ -1,4 +1,4 @@
-sync_info = create
+sync_info = update
 user_id = 
 setting_id = 
 base_id = GM003

orcaslicer/.config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json

@@ -2,7 +2,12 @@
     "from": "User",
     "inherits": "Voron 2.4 350 0.6 nozzle",
     "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
     "name": "AquaVoron 2.4 350 0.6 nozzle",
+    "print_host": "http://192.168.20.21",
     "printer_settings_id": "AquaVoron 2.4 350 0.6 nozzle",
+    "retraction_length": [
+        "0.1"
+    ],
     "version": "1.8.0.0"
 }

orcaslicer/.config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json

@@ -77,6 +77,9 @@
     "wipe": [
         "0"
     ],
+    "z_hop": [
+        "0"
+    ],
     "z_hop_types": [
         "Auto Lift"
     ]

orcaslicer/.config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1735702877

orcaslicer/.config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.18mm Fine 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

orcaslicer/.config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json

@@ -25,6 +25,7 @@
     "print_settings_id": "0.20mm Standard CR-10s",
     "sparse_infill_density": "30%",
     "sparse_infill_line_width": "107%",
+    "sparse_infill_pattern": "adaptivecubic",
     "sparse_infill_speed": "60",
     "support_interface_speed": "30",
     "support_line_width": "95%",

orcaslicer/.config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1736606291

orcaslicer/.config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.30mm Standard 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

scripts/bin/installers/blackmagic-parser.py

@@ -33,9 +33,9 @@ def getURLId(url):
 # getURLVersion() returns the url version number.
 def getURLVersion(url):
     if 'Beta' in url['downloadTitle']:
-        beta = re.search('Beta \d+', url['downloadTitle'])
+        beta = re.search('Beta \\d+', url['downloadTitle'])
         if beta:
-            beta = re.search('\d+', beta.group()).group()
+            beta = re.search('\\d+', beta.group()).group()
     else:
         beta = '99'
     return '{}.{}.{}.{}'.format(url['major'], url['minor'], url['releaseNum'], beta)

scripts/bin/installers/resolve-install.sh

@@ -5,6 +5,20 @@
 # Import library
 source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
 
+# Graphics card fix
+function graphicsCardFix() {
+  sudo rm /etc/OpenCL/vendors/mesa.icd
+  sudo rm /etc/OpenCL/vendors/pocl.icd
+}
+
+# gLib fix
+function glibFix() {
+  sudo mkdir /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libglib-2.0.so* /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgio-2.0.so*  /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgmodule-2.0.so* /opt/resolve/libs/_disabled
+}
+
 versionFile=/opt/resolve/version.txt
 
 resolveVersion=$(cat /opt/resolve/docs/ReadMe.html | grep 'DaVinci Resolve Studio' | filterVersion)
@@ -77,18 +91,12 @@ if [ ! -f ./*${installerName}_Linux.run ]; then
 fi
 echo "Installing ./*${installerName}_Linux.run"
 chmod +x ./*${installerName}_Linux.run
-sudo ./*${installerName}_Linux.run -i -y
+sudo SKIP_PACKAGE_CHECK=1 ./*${installerName}_Linux.run -i -y
 
 # Version number backup
 sudo echo $urlVersion > $versionFile
 
-# Graphics card fix
+glibFix
-sudo rm /etc/OpenCL/vendors/mesa.icd
-sudo rm /etc/OpenCL/vendors/pocl.icd
-
-# gLib fix
-sudo mkdir /opt/resolve/libs/_disabled
-sudo mv /opt/resolve/libs/libglib-2.0.so* /opt/resolve/libs/_disabled
 
 # Keyboard mapping fix
 setxkbmap -option 'caps:super'

wireplumber/.config/wireplumber/wireplumber.conf.d/91-user-scripts.conf

@@ -1,14 +0,0 @@
-wireplumber.components = [
-  {
-    name = /home/aqua/.config/wireplumber/scripts/auto-connect-ports.lua,
-    type = script/lua
-    provides = custom.my-script
-  }
-]
-
-wireplumber.profiles = {
-  main = {
-    custom.my-script = required
-  }
-}
-

wireplumber/.config/wireplumber/wireplumber.conf.d/99-user-scripts.conf

@@ -0,0 +1,13 @@
+wireplumber.components = [
+  {
+    name = auto-connect-ports.lua, type = script/lua
+    provides = custom.auto-connect-ports
+  }
+]
+
+wireplumber.profiles = {
+  main = {
+    custom.auto-connect-ports = required
+  }
+}
+

wireplumber/.local/share/wireplumber/scripts/auto-connect-ports.lua

@@ -7,7 +7,7 @@
 -- Link two ports together
 function link_port(output_port, input_port)
   if not input_port or not output_port then
-    return false
+    return nil
   end
 
   local link_args = {
@@ -29,42 +29,7 @@ function link_port(output_port, input_port)
   local link = Link("link-factory", link_args)
   link:activate(1)
 
-  return true
+  return link
-end
-
-function delete_link(link_om, output_port, input_port)
-  print("Trying to delete")
-
-  if not input_port or not output_port then
-    print("No ports")
-    return false
-  end
-
-  local link = link_om:lookup {
-    Constraint {
-      "link.input.node", "equals", input_port.properties["node.id"]
-    },
-    Constraint {
-      "link.input.port", "equals", input_port.properties["object.id"],
-    },
-    Constraint {
-      "link.output.node", "equals", output_port.properties["node.id"],
-    },
-    Constraint {
-      "link.output.port", "equals", output_port.properties["object.id"],
-    }
-  }
-
-  if not link then
-
-    print("No link!")
-
-    return
-  end
-
-  print("Deleting link!")
-
-  link:request_destroy()
 end
 
 -- Automatically link ports together by their specific audio channels.
@@ -107,6 +72,8 @@ function auto_connect_ports(args)
     }
   }
 
+  local links = {}
+
   local input_om = ObjectManager {
     Interest {
       type = "port",
@@ -131,22 +98,40 @@ function auto_connect_ports(args)
         Constraint { "port.direction", "equals", "in" }
       }
     }
-
   end
 
   function _connect()
     local delete_links = unless and unless:get_n_objects() > 0
 
-    print("Delete links", delete_links)
+    if delete_links then
+      for _i, link in pairs(links) do
+        link:request_destroy()
+      end
 
-    for output_name, input_name in pairs(args.connect) do
+      links = {}
-      local output = output_om:lookup { Constraint { "audio.channel", "equals", output_name } }
+
-      local input =  input_om:lookup { Constraint { "audio.channel", "equals", input_name } }
+      return
+    end
+
+    for output_name, input_names in pairs(args.connect) do
+      local input_names = input_names[1] == nil and { input_names } or input_names
 
       if delete_links then
-        delete_link(all_links, output, input)
       else
-        link_port(output, input)
+        -- Iterate through all the output ports with the correct channel name
+        for output in output_om:iterate { Constraint { "audio.channel", "equals", output_name } } do
+          for _i, input_name in pairs(input_names) do
+            -- Iterate through all the input ports with the correct channel name
+            for input in input_om:iterate { Constraint { "audio.channel", "equals", input_name } } do
+              -- Link all the nodes
+              local link = link_port(output, input)
+
+              if link then
+                table.insert(links, link)
+              end
+            end
+          end
+        end
       end
     end
   end
@@ -166,10 +151,12 @@ function auto_connect_ports(args)
   end
 end
 
+-- pw-cli list-objects | grep object.path
+
 -- Connect to speakers
 auto_connect_ports {
   output = Constraint { "object.path", "matches", "speakers:*" },
-  input = Constraint { "object.path", "matches", "alsa:pcm:2:hw:2,0:playback:*" },
+  input = Constraint { "object.path", "matches", "alsa:acp:C8Pre:0:playback:*" },
   connect = {
     ["FL"] = "AUX0",
     ["FR"] = "AUX1"

wireplumber/.local/share/wireplumber/scripts/dump-ports.lua

@@ -0,0 +1,26 @@
+-- Dump all Wireplumber ports
+
+function dump(o)
+   if type(o) == 'table' then
+      local s = '{ '
+      for k,v in pairs(o) do
+         if type(k) ~= 'number' then k = '"'..k..'"' end
+         s = s .. '['..k..'] = ' .. dump(v) .. ',\n'
+      end
+      return s .. '} '
+   else
+      return tostring(o)
+   end
+end
+
+local port_om = ObjectManager {
+  Interest {
+    type = "port",
+  }
+}
+
+port_om:connect("object-added", function (om, port)
+  print(dump(port.properties) .. '\n\n')
+end)
+
+port_om:activate()