feat(orcaslicer): add config

2025-11-27 18:13:19 +00:00 · 2025-11-09 16:30:00 -05:00
parent 32ff6cb136
commit 2f9ecf7571
24 changed files with 575 additions and 0 deletions
--- a/home/dot_config/OrcaSlicer/user/default/process/0.18mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.18mm
@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1735702877
--- a/home/dot_config/OrcaSlicer/user/default/process/0.18mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.18mm
@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.18mm Fine 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}
--- a/home/dot_config/OrcaSlicer/user/default/process/0.20mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.20mm
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1702867957
--- a/home/dot_config/OrcaSlicer/user/default/process/0.20mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.20mm
@@ -0,0 +1,41 @@
+{
+    "brim_type": "no_brim",
+    "brim_width": "10",
+    "default_acceleration": "0",
+    "enable_support": "1",
+    "from": "User",
+    "gap_infill_speed": "30",
+    "infill_combination": "1",
+    "inherits": "0.20mm Standard @MyKlipper",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "35",
+    "initial_layer_line_width": "137%",
+    "initial_layer_speed": "20",
+    "inner_wall_acceleration": "0",
+    "inner_wall_line_width": "112%",
+    "inner_wall_speed": "35",
+    "internal_solid_infill_line_width": "112%",
+    "internal_solid_infill_speed": "50",
+    "is_custom_defined": "0",
+    "line_width": "100%",
+    "name": "0.20mm Standard CR-10s",
+    "outer_wall_acceleration": "0",
+    "outer_wall_line_width": "80%",
+    "outer_wall_speed": "35",
+    "print_settings_id": "0.20mm Standard CR-10s",
+    "sparse_infill_density": "30%",
+    "sparse_infill_line_width": "107%",
+    "sparse_infill_pattern": "adaptivecubic",
+    "sparse_infill_speed": "60",
+    "support_interface_speed": "30",
+    "support_line_width": "95%",
+    "support_object_xy_distance": "0.75",
+    "support_speed": "30",
+    "support_type": "tree(auto)",
+    "top_surface_acceleration": "0",
+    "top_surface_line_width": "107%",
+    "top_surface_speed": "30",
+    "travel_acceleration": "1500",
+    "travel_speed": "150",
+    "version": "1.6.1.0"
+}
--- a/home/dot_config/OrcaSlicer/user/default/process/0.30mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.30mm
@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1736606291
--- a/home/dot_config/OrcaSlicer/user/default/process/0.30mm
+++ b/home/dot_config/OrcaSlicer/user/default/process/0.30mm
@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.30mm Standard 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}