fix(aquaai): reduce em dashes

home/bin/README.md

@@ -0,0 +1,25 @@
+# Scripts
+
+## AquaAI
+
+AquaAI is bash script that interacts with OpenAI and Ollama APIs to enable terminal based interaction with LLMs.
+
+## connect-nas.sh
+
+Connect to long storage NAS.
+
+## convert-mp4-to-resolve.sh
+
+Converts mp4 video files to a video format where the audio works with the linux version of Davinci Resolve.
+
+## frc-photo-checklist.py
+
+Python script to generate a Todoist checklist for taking photos at an FRC event.
+
+```sh
+python frc-photo-checklist.py [Event Key]
+```
+
+## get-mouse-battery.sh
+
+Prints out the battery percentage of a mouse and if it is charging.

home/bin/audio/audio-lib.sh

@@ -0,0 +1,121 @@
+# Mix names
+MONITOR_LEFT='A'
+MONITOR_RIGHT='B'
+HEADPHONE_01_LEFT='C'
+HEADPHONE_01_RIGHT='D'
+HEADPHONE_02_LEFT='E'
+HEADPHONE_02_RIGHT='F'
+BLANK_LEFT="G"
+BLANK_RIGHT='H'
+
+# Level constants
+MUTE='0'
+ZERO_DB='0db'
+
+# Formats a number to match the matrix numbering.
+function formatMatrixNum() {
+    printf "%02d" $1
+}
+
+# Returns audio card number with matching card name.
+function getCardNumber() {
+    echo $(cat /proc/asound/cards | grep -m 1 $1 | grep -Po '\d{1,2}' | head -1)
+}
+
+# Checks if the card exists and if not exits.
+#
+# $1 card name
+# $2 card number
+function checkCard() {
+    if [ -z "$2" ]; then
+	echo $1 not connected
+	exit 1
+    else
+	echo $1 found at hw:$2
+    fi
+}
+
+# Prints a list of all controls for the given sound card.
+function printControls() {
+    amixer -c $1 controls
+}
+
+# Sets a mix to a level.
+#
+# $1 card number
+# $2 matrix number
+# $3 mix channel
+function setMix() {
+    amixer -c $1 set "Mix $3 Input $(formatMatrixNum $2)" $4
+}
+
+
+# Sets the volume levels for a mono mix.
+#
+# $1 card number
+# $2 matrix number
+# $3 mix left channel
+# $4 mix right channel
+# $5 volume
+function setMonoMix() {
+    setMix $1 $2 $3 $5
+    setMix $1 $2 $4 $5
+}
+
+# Sets the volume levels for a stereo mix.
+#
+# $1 card number
+# $2 matrix number
+# $3 mix left channel
+# $4 mix right channel
+# $5 volume
+function setStereoMix() {
+    matrix=$2
+    setMix $1 $matrix       $3 $5
+    setMix $1 $matrix       $4 $MUTE
+    setMix $1 $((matrix+1)) $3 $MUTE
+    setMix $1 $((matrix+1)) $4 $5
+}
+
+
+# Sets the volume levels for a mono mix for several outputs.
+#
+# $1 card number
+# $2 matrix number
+# $3 mix left channel
+# $4 mix right channel
+# $5 monitor volume
+# $6 first headphone volume
+# $7 second headphone volume
+function setMono() {
+    monitor=$3
+    headphone1=$4
+    headphone2=$5
+    if [ -n $headphone1 ]; then headphone1=$monitor; fi
+    if [ -n $headphone2 ]; then headphone2=$monitor; fi
+    setMonoMix $1 $2 $MONITOR_LEFT      $MONITOR_RIGHT      $monitor
+    setMonoMix $1 $2 $HEADPHONE_01_LEFT $HEADPHONE_01_RIGHT $headphone1
+    setMonoMix $1 $2 $HEADPHONE_02_LEFT $HEADPHONE_02_RIGHT $headphone2
+    setMonoMix $1 $2 $BLANK_LEFT        $BLANK_RIGHT        $MUTE
+}
+
+# Sets the volume levels for a stereo mix for several outputs.
+#
+# $1 card number
+# $2 matrix number
+# $3 mix left channel
+# $4 mix right channel
+# $5 monitor volume
+# $6 first headphone volume
+# $7 second headphone volume
+function setStereo() {
+    monitor=$3
+    headphone1=$4
+    headphone2=$5
+    if [ -n $headphone1 ]; then headphone1=$monitor; fi
+    if [ -n $headphone2 ]; then headphone2=$monitor; fi
+    setStereoMix $1 $2 $MONITOR_LEFT      $MONITOR_RIGHT      $monitor
+    setStereoMix $1 $2 $HEADPHONE_01_LEFT $HEADPHONE_01_RIGHT $headphone1
+    setStereoMix $1 $2 $HEADPHONE_02_LEFT $HEADPHONE_02_RIGHT $headphone2
+    setStereoMix $1 $2 $BLANK_LEFT        $BLANK_RIGHT        $MUTE
+}

home/bin/audio/executable_aax-convert.sh

@@ -0,0 +1,11 @@
+#! /bin/bash
+
+# Load user settings from config file.
+. ~/.config/settings.conf
+
+for file in *.aax; do
+    convertedFile="./${file%%.*}.m4b"
+    if [ ! -f "$convertedFile" ]; then
+	ffmpeg -y -activation_bytes ${activation_bytes} -i ./${file} -codec copy $convertedFile
+    fi
+done

home/bin/audio/executable_aquamix.sh

@@ -0,0 +1,159 @@
+#!/bin/bash
+
+# Script to manuage audio mixing the the main audio interface.
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/audio-lib.sh
+
+INTERFACE_NAME='Clarett+ 8Pre'
+INTERFACE_NUM=$(getCardNumber $INTERFACE_NAME)
+checkCard "$INTERFACE_NAME" "$INTERFACE_NUM"
+
+# Sets the volume levels of the first mono instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setMonoOne() {
+    setMono $INTERFACE_NUM 1 $1 $2 $3
+}
+
+# Sets the volume levels of the second mono instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setMonoTwo() {
+    setMono $INTERFACE_NUM 2 $1 $2 $3
+}
+
+# Sets the volume levels of the third mono instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setMonoThree() {
+    setMono $INTERFACE_NUM 3 $1 $2 $3
+}
+
+# Sets the volume levels of the first stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoOne() {
+    setStereo $INTERFACE_NUM 5 $1 $2 $3
+}
+
+# Sets the volume levels of the second stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoTwo() {
+    setStereo $INTERFACE_NUM 7 $1 $2 $3
+}
+
+# Sets the volume levels of the third stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoThree() {
+    setStereo $INTERFACE_NUM 9 $1 $2 $3
+}
+
+# Sets the volume levels of the fourth stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoFour() {
+    setStereo $INTERFACE_NUM 11 $1 $2 $3
+}
+
+# Sets the volume levels of the fifth stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoFive() {
+    setStereo $INTERFACE_NUM 13 $1 $2 $3
+}
+
+# Sets the volume levels of the sixth stereo instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setStereoSix() {
+    setStereo $INTERFACE_NUM 15 $1 $2 $3
+}
+
+
+
+# Sets the volume levels of the studio microphone.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setMic() {
+    setMono $INTERFACE_NUM 4 $1 $2 $3
+}
+
+# Sets the volume levels of the computer.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setComputerAudio() {
+    setStereo $INTERFACE_NUM 17 $1 $2 $3
+}
+
+# Sets the volume levels of all instrument.
+#
+# $1 monitor volume
+# $2 first headphone volume
+# $3 second headphone volume
+function setInstruments() {
+    setMonoOne     $1 $2 $3
+    setMonoTwo     $1 $2 $3
+    setMonoThree   $1 $2 $3
+    setStereoOne   $1 $2 $3
+    setStereoTwo   $1 $2 $3
+    setStereoThree $1 $2 $3
+    setStereoFour  $1 $2 $3
+    setStereoFive  $1 $2 $3
+    setStereoSix   $1 $2 $3
+}
+
+function DAWMode() {
+    setInstruments $MUTE
+    setMic $MUTE
+    setComputerAudio $ZERO_DB
+}
+
+function NormalMode() {
+    setInstruments $ZERO_DB
+    setMic $MUTE
+    setComputerAudio $ZERO_DB
+}
+
+function PrintHelp() {
+    echo AquaMixer
+    echo '-h --help    print out help options'
+    echo '-d --daw     set interface to DAW mode'
+    echo '-n --normal  set interface to normal mode'
+    exit 0
+}
+
+for var in "$@"; do
+    if [ $var == '-h' ] || [ $var == '--help' ]; then
+	PrintHelp
+    elif [ $var == '-d' ] || [ $var == '--daw' ]; then
+	DAWMode
+    elif [ $var == '-n' ] || [ $var == '--normal' ]; then
+	NormalMode
+    fi
+done
+

home/bin/audio/executable_es8start.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Script to add another audio interface if available.
+
+DEVICE_NAME='ES-8'
+DEVICE_NUM=$(getCardNumber $DEVICE_NAME)
+checkCard $DEVICE_NAME $DEVICE_NUM
+
+# Start up audio interface
+alsa_in -d hw:$DEVICENUM -j "$DEVICENAME In" -q 1 &
+alsa_out -d hw:$DEVICENUM -j "$DEVICENAME Out" -q 1 &

home/bin/audio/executable_es9start.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+# Script to add another audio interface if available.
+
+# Import library
+source $(dirname $(realpath ${BASH_SOURCE[0]}))/audio-lib.sh
+
+DEVICE_NAME='ES-9'
+DEVICE_NUM=$(getCardNumber $DEVICE_NAME)
+checkCard $DEVICE_NAME $DEVICE_NUM
+
+# Start up ES-5
+pkill es-5-pipewire || true
+/opt/es-5-pipewire/es-5-pipewire >/dev/null 2>/dev/null &
+sleep 0.1
+jack_connect ES-5:output "$DEVICE_NAME:playback_SL" || true
+jack_connect ES-5:output "$DEVICE_NAME:playback_AUX6" || true

home/bin/audio/executable_es9stop.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Script to stop ES-9 audio interface
+
+pkill alsa_in
+pkill alsa_out
+pkill es-5-pipewire

home/bin/audio/executable_synth-power-prompt.sh

@@ -0,0 +1,15 @@
+#!/usr/bin/env sh
+
+# Script to bring up a prompt to set synth power state.
+
+current='Keep current state'
+off='Power synths off'
+on='Power synths on'
+selected=$(echo -e "${current}\n${off}\n${on}" | rofi -dmenu -p \
+	   'Change synth power' -theme ~/.config/rofi/themes/aqua)
+
+if [ "$selected" == "$off" ]; then
+    python ~/.config/scripts/audio/synth-power.py -o
+elif [ "$selected" == "$on" ]; then
+    python ~/.config/scripts/audio/synth-power.py -d
+fi

home/bin/audio/executable_system-start-audio.sh

@@ -0,0 +1,88 @@
+#! /bin/bash
+
+# Kill Pulse.
+function killPulse() {
+    systemctl --user stop pulseaudio.socket
+    systemctl --user stop pulseaudio.service
+    pulseaudio -k
+    killall pulseaudio
+}
+
+# Start Pulseaudio properly.
+function fixPulse() {
+    PULSE="$(alsamixer 2>&1 | killall alsamixer)"
+    if [[ $PULSE == *'Connection refused'* ]]; then
+	echo 'Fixing Pulseaudio'
+	killPulse
+	sleep 0.1
+	pulseaudio -D
+	fixPulse
+    else
+	echo 'Pulseaudio is working correctly'
+    fi
+}
+
+# Start up programs that use audio.
+function launchi3() {
+    if [ -z "$skipi3" ]; then
+	echo Opening i3wm sound workspaces
+	sleep .1 && i3-msg 'workspace 5; exec brave-browser'
+	#sleep 5.1 && python ~/bin/start-firefox.py
+    fi
+}
+
+# Set up sinks.
+function setupSinks() {
+    pactl set-default-sink speakers
+    pactl set-default-source sm7b
+}
+
+# Connect sinks to audio interface
+function connectSinks() {
+    pw-link speakers:monitor_FL alsa_output.usb-Focusrite_Clarett__8Pre_00002325-00.pro-output-0:playback_AUX0
+    pw-link speakers:monitor_FR alsa_output.usb-Focusrite_Clarett__8Pre_00002325-00.pro-output-0:playback_AUX1
+
+    pw-link alsa_input.usb-Focusrite_Clarett__8Pre_00002325-00.pro-input-0:capture_AUX3 sm7b:input_FL
+    pw-link alsa_input.usb-Focusrite_Clarett__8Pre_00002325-00.pro-input-0:capture_AUX3 sm7b:input_FR
+    return $?
+}
+
+function renameInterface() {
+    for n in `seq 0 17` ; do
+	jack_property -p -s "alsa:pcm:2:hw:2,0:capture:capture_${n}" http://jackaudio.org/metadata/pretty-name "capture_$((n+1))"
+    done
+    for n in `seq 0 19` ; do
+	jack_property -p -s "alsa:pcm:2:hw:2,0:playback:playback_${n}" http://jackaudio.org/metadata/pretty-name "playback_$((n+1))"
+    done
+    for n in `seq 0 19` ; do
+	jack_property -p -s "alsa:pcm:2:hw:2,0:playback:monitor_${n}" http://jackaudio.org/metadata/pretty-name "monitor_$((n+1))"
+    done
+}
+
+# Restart the Wireplumber service.
+function restartWireplumber() {
+    systemctl --user stop wireplumber
+    sleep 5
+    systemctl --user restart wireplumber
+}
+
+# arg parser
+for arg in "$@"
+do
+    # Skip commands for i3wm
+    if [[ $arg == *"-s"* ]]; then
+	skipi3=true
+    fi
+done
+
+# Wire sinks
+setupSinks
+
+# Eurorack audio interface
+sh ~/bin/audio/es9start.sh
+
+launchi3
+systemctl --user restart polybar
+sleep 5
+restartWireplumber
+

home/bin/audio/synth-power.py

@@ -0,0 +1,63 @@
+#!/usr/bin/env python3
+
+# Program to control synthesizers power state.
+
+import argparse
+import configparser
+import os,sys,inspect
+currentDir = os.path.dirname(os.path.abspath(
+    inspect.getfile(inspect.currentframe())))
+parentDir = os.path.dirname(currentDir)
+sys.path.insert(0, parentDir) 
+from homeassistant import HomeAssistant
+
+# Parse settings config
+SCRIPT_DIR = os.path.abspath(os.path.dirname(sys.argv[0]))
+configString = '[Settings]\n' + open(SCRIPT_DIR + '/../../settings.conf').read()
+configParser = configparser.RawConfigParser()
+configParser.read_string(configString)
+
+# Load needed credentials
+HA_IP = configParser.get('Settings', 'HA_IP')
+HA_TOKEN = configParser.get('Settings', 'HA_TOKEN')
+
+# Set power state of the Eurorack.
+def setEurorackPower(state):
+    ha.setOnOff('switch.eurorack_lower', state)
+    ha.setOnOff('switch.eurorack_top', state)
+
+# Set power state of the Behringer DeepMind 12.
+def setDeepMind12Power(state):
+    ha.setOnOff('switch.deepmind_12', state)
+
+# Set power state of the ASM Hydrasynth.
+def setHydrasynthPower(state):
+    ha.setOnOff('switch.hydrasynth', state)
+
+# Set power state of the Arturia MatrixBrute.
+def setMatrixBrutePower(state):
+    ha.setOnOff('switch.matrixbrute', state)
+
+# Set power state of all synthesizers.
+def setSynthsPower(state):
+    setEurorackPower(state)
+    setDeepMind12Power(state)
+    setHydrasynthPower(state)
+    setMatrixBrutePower(state)
+
+parser = argparse.ArgumentParser(
+    description='Control power state of synthesizers.')
+parser.add_argument('-d', '--daw', action='store_true',
+                    help='enable DAW mode',
+                    dest='daw', default=False, required=False)
+parser.add_argument('-o', '--off', action='store_true',
+                    help='turn all synths off',
+                    dest='off', default=False, required=False)
+args = parser.parse_args()
+
+ha = HomeAssistant(HA_IP, HA_TOKEN)
+
+if args.daw:
+    setSynthsPower(True)
+elif args.off:
+    setSynthsPower(False)

home/bin/convert-mp4-to-resolve.sh

@@ -0,0 +1,9 @@
+#! /bin/bash
+
+# Create backup directory
+mkdir -p ./converted
+
+# Convert files
+for file in *.mp4 *.MP4 *.mov *.MOV; do
+    ffmpeg -i $file -acodec pcm_s16le -vcodec copy ./converted/${file%%.*}.mov
+done

home/bin/desktop/executable_polybar-start.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Stop all polybar instances
+killall -q polybar
+while pgrep -x polybar >/dev/null; do sleep 0.1; done
+
+for monitor in $(xrandr -q | grep -e "\sconnected\s" | cut -d' ' -f1); do
+    if [ $monitor == 'DP-2' ] || [ $monitor == 'LVDS-1' ]; then
+	MONITOR=$monitor polybar aqua &
+    fi
+done
+
+

home/bin/desktop/executable_waybar-start.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Stop all waybar instances
+killall -q waybar
+while pgrep -x waybar >/dev/null; do sleep 0.1; done
+
+waybar &

home/bin/desktop/i3wm-close-window.py

@@ -0,0 +1,19 @@
+#!/usr/bin/env python3
+
+import i3ipc, os
+
+def onWindowClose(conn, win):
+    if(win.ipc_data['container']['window_properties']['class'] == 'Bitwig Studio'):
+        print(win.ipc_data['container']['window_properties']['title'])
+        if(win.ipc_data['container']['window_properties']['title'] !=
+           'DSP Performance Graph'):
+            os.system('sh ~/.config/scripts/audio/aquamix.sh -n')
+            os.system('sh ~/.config/scripts/audio/synth-power-prompt.sh')
+
+i3 = i3ipc.Connection()
+i3.on('window::close', onWindowClose)
+i3.main()
+
+
+
+

home/bin/executable_aquaai.sh

@@ -0,0 +1,929 @@
+#!/usr/bin/env bash
+
+# This is a bash script to enable interacting with LLMs via the command line.
+
+#===============================================================================
+
+## Modes
+### Default mode
+# Default mode uses the default prompt and model for AquaAI. It's nothing
+# special.
+### Bash mode
+# This mode will help with writing bash scripts.
+### CLI mode
+# CLI mode prompts the AI with system information and will return terminal
+# commands. If you wish to run the command simply type run and it will end the
+# chat and run the command. You are responsible for validating what the command
+# does before running.
+### Code Review mode
+# This will ask you what changes to look at and will provide a code review of
+# the changes. This mode only works if you are currently in a git repo. It can
+# look at the past few commits as well as changes that have yet to be committed.
+### Reasoning mode
+# This uses the best available reasoning model with the default prompt.
+# Reasoning models take a task and break them up to subtask to pass to
+# specialized models. They are very yappy and take a while to run. Can be good
+# for complex tasks.
+### Regex mode
+# This mode will respond only with regex.
+### Git mode
+# This mode will respond only with git commands. If you wish to run the command
+# simply type run and it will end the chat and run the command. You are
+# responsible for validating what the command does before running.
+
+## Special Input
+### Edit
+# You can type `edit` or `e` as a response and it will open your editor set with
+# the EDITOR variable in your shell session. You can then type your query and
+# save and exit. From there the program will send your query to the AI.
+### Exit
+# You can type `exit` or `q` to end the chat. Personally, I never do this just
+# use C-c.
+### Run
+# If you are in cli mode you can type `run` or `r` and the script will run the
+# given commands on your system. You are playing with fire with this, but fire
+# is useful and fun just be careful.
+### Save
+# You can type `save` or `s` as a response and the chat history will be saved
+# for use at another time. This will also end the chat. Chats are stored in
+# `~/.local/share/aquaai`
+
+## Adding custom modes
+# There are two variables that need to be set to create a custom mode.
+### $selected_model will set the model to be used for the chat.
+### $system_prompt will be the prompt that controls how the AI behaves.
+# introduce more noise into text generation leading to more out there responses.
+#
+# Defaults are set for all these but to define a custom mode you should override
+# at least one of these in a function. Add a custom flag in the switch statement
+# at the bottom of this file and call the function there. See `--bash` as an
+# example of how to do this. From there add some documentation to the
+# print_help() function and then here.
+
+#===============================================================================
+
+# User configurable variables.
+#
+# The following are settings that can be overwritten by environment variables.
+# You can set these in your .bashrc to have them set each time you open a new
+# shell. This script is designed not to be modified so updates can be applied by
+# replacing the file with the newest version.
+#
+#
+# Set the url of the ollama server.
+#
+# export AQUAAI_OLLAMA_URL='192.168.1.156:11434'
+#
+ollama_url=${AQUAAI_OLLAMA_URL:='https://ai.aquamorph.com/api'}
+#
+# Set the default model.
+#
+# export AQUAAI_DEFAULT_MODEL='qwen2.5-7b-instruct'
+#
+default_model=${AQUAAI_DEFAULT_MODEL:='qwen2.5:32b-instruct'}
+#
+# Set the default coding model.
+#
+# export AQUAAI_CODING_MODEL='qwen2.5-7b-coder'
+#
+coding_model=${AQUAAI_CODING_MODEL:='qwen2.5-32b-coder'}
+#
+# In multiline mode, users can input multiple lines of text by pressing the
+# Enter key. The message will be sent when the user presses C-d on the keyboard.
+#
+# export AQUAAI_MULTILINE_MODE=true
+#
+multiline_mode=${AQUAAI_MULTILINE_MODE:=false}
+#
+# Enable rich formatting for text output. A formatting program is required for
+# this see below.
+#
+# export AQUAAI_RICH_FORMAT_MODE=true
+#
+rich_format_mode=${AQUAAI_RICH_FORMAT_MODE:=false}
+#
+# Path to the program used for rich formatting. I am currently using streamdown
+# but you are free to use something different as long as it supports streaming
+# text and markdown. Go to the GitHub repo to learn to install streamdown and
+# configure: https://github.com/day50-dev/Streamdown
+#
+# export AQUAAI_RICH_FORMAT_PATH=~/.venv/bin/streamdown
+#
+rich_format_path=${AQUAAI_RICH_FORMAT_PATH:=streamdown}
+#
+# Ignore certificate checks.
+#
+# export AQUAAI_INSECURE_MODE=true
+#
+insecure_mode=${AQUAAI_INSECURE_MODE:=false}
+#
+# Use OpenAI api design instead of Ollama.
+#
+# export AQUAAI_OPENAI_API:=true
+#
+openai_api=${AQUAAI_OPENAI_API:=true}
+#
+# Set key used to authenticate with the API.
+#
+# export AQUAAI_KEY:=true
+#
+key=${AQUAAI_KEY:=''}
+#===============================================================================
+
+# Constants.
+OLLAMA_URL=${ollama_url}
+CURL_FLAGS=('-sN')
+USER=$(whoami)
+DATA_DIR="${HOME}/.local/share/aquaai"
+RESPONSE_FIFO="${DATA_DIR}/.response"
+AGENT_NAME='AquaAI'
+
+# Colors.
+CLEAR='\033[0m'
+BLUE='\033[0;34m'
+RED='\e[1;31m'
+LIGHT_GRAY='\e[38;5;247m'
+
+# Globals.
+message_history="[]"
+cli_mode=false
+git_mode=false
+code_review_start=false
+selected_model=${default_model}
+
+# Error Codes.
+ERROR_NO_SAVEFILE=1
+ERROR_INVALID_TEMP=2
+ERROR_UNKNOWN_OPTION=3
+ERROR_UNKNOWN_MODEL=4
+ERROR_NO_GIT_REPO=5
+ERROR_INVALID_INPUT=6
+ERROR_NO_AUTOSAVE=7
+ERROR_INVALID_SSL=8
+ERROR_UNKNOWN_SSL=9
+
+#===============================================================================
+
+# Give the AI a name. It improves prompting to call it by name.
+function name_agent() {
+  system_prompt="You are an AI assistant named ${AGENT_NAME}."
+}
+
+# Make the AI write and behave better.
+function set_better_conversions() {
+  system_prompt+=' Be as concise as possible.'
+  system_prompt+=' Be extremely accurate.'
+  system_prompt+=' Recommend things I would not realize I would benefit from.'
+  system_prompt+=' Call out my misconceptions and tell me when I am wrong.'
+  system_prompt+=" For personal matters ${AGENT_NAME} is encouraging"
+  system_prompt+=' but brutally honest.'
+  system_prompt+=' Never sycophantic.'
+  system_prompt+=' Do not use em dashes. If an em dash would normally appear,'
+  system_prompt+=' use a comma for continuing thoughts or a period if it'
+  system_prompt+=' should be a separate sentence.'
+}
+
+# Set the formatting for all reponses.
+function set_response_format() {
+  system_prompt+=' Do not wrap response in quotation marks or apostrophes.'
+  system_prompt+=' Do not use html to format response.'
+}
+
+# Limit format of output to just commands.
+function format_for_cli() {
+  system_prompt+=" ${AGENT_NAME} does not put commands in quotation marks."
+  system_prompt+=" ${AGENT_NAME} does not put commands in markdown."
+  system_prompt+=" ${AGENT_NAME} only outputs terminal commands."
+}
+
+# Default prompt.
+function set_default_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} follows the users instructions carefully."
+  system_prompt+=" ${AGENT_NAME} responds using extended markdown."
+  set_better_conversions
+  set_response_format
+}
+
+# Set chat to help with command line questions.
+function set_cli_agent() {
+  local os_version=$(cat /etc/os-release | grep 'PRETTY_NAME' | \
+                       sed 's/PRETTY_NAME=//g' | tr -d '"')
+  name_agent
+  system_prompt+=" ${AGENT_NAME} assists users with ${os_version}."
+  format_for_cli
+  set_response_format
+}
+
+# Set chat to help with bash questions.
+function set_bash_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} assists users with POSIXs bash."
+  system_prompt+=' Format output for view in a command line.'
+  system_prompt+=' Do not put commands in quotation marks.'
+  system_prompt+=' Use double spaces and the function keyword.'
+  system_prompt+=' Write documentation before the function declaration.'
+  set_response_format
+}
+
+# Set ai to help with code reviews.
+function set_code_review_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} is a senior software engineer performing a"
+  system_prompt+=' code review for a colleague.'
+  system_prompt+=''
+  set_better_conversions
+  system_prompt+=' Show code snipets when helpful.'
+  system_prompt+="${AGENT_NAME}'s reports should have the following format:"
+  system_prompt+='# Typos'
+  system_prompt+='List of all typos you find.'
+  system_prompt+='# Formatting and Readability Issues'
+  system_prompt+='List of all formatting and readability issues you find.'
+  system_prompt+='# Security Issues'
+  system_prompt+='List of all security issues you find.'
+  system_prompt+='# Other'
+  system_prompt+='List of all other issues you find.'
+  set_response_format
+}
+
+# Set chat to help with git.
+function set_git_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} assists users with git."
+  format_for_cli
+
+  if is_git_repo; then
+    system_prompt+="\n\nHere is some information about the current git repo.\n"
+    local current_branch=$(git branch --show-current)
+    system_prompt+="Current branch: ${current_branch} \n"
+    local git_remotes=$(git remote -v)
+    system_prompt+="Remotes: ${git_remotes}\n"
+  fi
+}
+
+# Set chat to help with regex.
+function set_regex_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} assists users with regex."
+  system_prompt+=' Only output a single regex expression.'
+  system_prompt+=' Use BRE and ERE regex.'
+  format_for_cli
+}
+
+# Set chat to help with Home Assistant.
+function set_home_assistant_agent() {
+  name_agent
+  system_prompt+=" ${AGENT_NAME} assists users with Home Assistant programming."
+  system_prompt+=" Templating is done with Jinja2."
+}
+
+#===============================================================================
+
+# Get the first available model from a given list.
+function get_model_from_list() {
+  local models=("$@")
+  for m in "${models[@]}"; do
+    check_if_model_exists $m true
+    if [ $? -eq 0 ]; then
+      echo "${m}"
+      return
+    fi
+  done
+  print_error "could not find any models on the list."
+  exit $ERROR_UNKNOWN_MODEL
+}
+
+function load_model_from_list() {
+  local models=("$@")
+  selected_model=$(get_model_from_list "${models[@]}")
+  if [[ $? -ne 0 ]]; then
+     print_error "could not find any models on the list."
+     exit $ERROR_UNKNOWN_MODEL
+  fi
+}
+
+# Set the default coding model.
+function set_coding_model() {
+  local models=(${coding_model}
+                'qwen2.5-32b-coder'
+                'qwen2.5-7b-coder'
+                'llama3.3-70b-instruct'
+                'hf.co/Qwen/Qwen2.5-Coder-3B-Instruct-GGUF:Q4_K_M'
+                'hf.co/bartowski/Qwen2.5-Coder-1.5B-Instruct-GGUF:Q4_K_M'
+                'qwen2.5-coder:3b'
+                'qwen2.5-coder:0.5b'
+               )
+  load_model_from_list "${models[@]}"
+}
+
+# Set the default reasoning model.
+function set_reasoning_model() {
+  local models=(${reasing_model}
+                'qwen3-32b'
+                'gpt-oss-120b'
+               )
+  load_model_from_list "${models[@]}"
+}
+
+#===============================================================================
+
+# Print out help menu.
+function print_help() {
+  echo 'Interact with the AquaAI via the command line.'
+  echo ''
+  echo '--delete         - delete a chat from history'
+  echo '-l --list        - list available models'
+  echo '--load           - load a chat from history'
+  echo '--restore        - load last auto saved chat'
+  echo ''
+  echo '--bash           - help with bash'
+  echo '--cli            - help with command line'
+  echo '--code-review    - code review of a git project'
+  echo '-r --reason      - help with a reasoning model'
+  echo '--regex          - help with regex'
+  echo '--git            - help with git'
+}
+
+# Print out error message.
+function print_error() {
+  local msg=${1}
+  printf "${RED}ERROR: ${msg}\n${CLEAR}"
+}
+
+# Check if a given program is installed on the system.
+function check_program() {
+  if ! command -v ${1} 2>&1 >/dev/null; then
+    print_error "${1} not found. Please install ${1}."
+    exit ${ERROR_DEPENDENCY}
+  fi
+}
+
+# Check system for required programs.
+function check_requirements() {
+  check_program curl
+  check_program jq
+  check_program fzf
+  if [ "${rich_format_mode}" == true ]; then
+    check_program ${rich_format_path}
+  fi
+}
+
+# Get available models info.
+function get_models() {
+  local model_path=''
+  if [ "${openai_api}" == true ]; then
+    model_path='/models'
+  else
+    model_path='/tags'
+  fi
+  curl "${CURL_FLAGS[@]}" "${OLLAMA_URL}${model_path}"
+}
+
+# Get a list of available models.
+function get_models_list() {
+  local jq_filter=''
+  if [ "${openai_api}" == true ]; then
+    jq_filter='.data[].id'
+  else
+    jq_filter='.models[].model'
+  fi
+  get_models | jq -r ${jq_filter}
+}
+
+# Print list of models.
+function print_models() {
+  get_models_list | column -t -s $'\t'
+}
+
+# Print message variable.
+function print_message_history() {
+  echo ${message_history}
+}
+
+# Print message variable.
+function print_debug() {
+  echo "Model: ${selected_model}"
+  echo 'System Prompt:'
+  print_system_prompt
+  echo 'Chat History:'
+  print_message_history | jq
+}
+
+# Print the system prompt.
+function print_system_prompt() {
+  echo -e "${system_prompt}"
+}
+
+# Check if the model exists.
+function check_if_model_exists() {
+  local model=${1}
+  local enable_rc=${2}
+  local model_list=($(get_models_list))
+
+  for m in "${model_list[@]}"; do
+    if [[ "$m" == "$model" ]]; then
+      return 0
+    fi
+  done
+
+  if [ ${enable_rc} ]; then
+     return 1
+  else
+    print_error "model ${model} does not exists."
+    exit $ERROR_UNKNOWN_MODEL
+  fi
+}
+
+# Convert string to a safe format for later use.
+function convert_to_safe_text() {
+  echo "${1}" | jq -sR @json
+}
+
+# Set the text output color for user input.
+function set_user_color() {
+  printf "${LIGHT_GRAY}"
+}
+
+# Set the text output color for ai response.
+function set_ai_color() {
+  printf "${CLEAR}"
+}
+
+# Set text color to defaults.
+function set_clear_color() {
+  printf "${CLEAR}"
+}
+
+# Print the header for the ai message
+function print_ai_start_message() {
+  echo -e "\U1F916 AquaAI"
+}
+
+# Print the header for the ai message
+function print_user_start_message() {
+  echo -e "\U1F464 ${USER}"
+}
+
+# Opens the user's preferred text editor to allow them to input text.
+function editor_input() {
+  local editor=${EDITOR:=nano}
+  local temp_file=$(mktemp)
+
+  ${editor} ${temp_file}
+  local user_input=$(<"$temp_file")
+  rm "$temp_file"
+
+  msg=${user_input}
+}
+
+# Check if current directory is managed by git.
+function is_git_repo() {
+  git rev-parse --is-inside-work-tree &> /dev/null
+}
+
+# Check if current directory is managed by git.
+function check_git_directory() {
+  if ! git rev-parse --is-inside-work-tree &> /dev/null; then
+    print_error 'The current directory is not inside a git repository.'
+    exit ${ERROR_NO_GIT_REPO}
+  fi
+}
+
+# Asks the user if they want to include staged git change data.
+function gather_staged_changes() {
+  echo -n 'Do you want to include staged changes? (y/n)? '
+  read response
+
+  if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+    msg+=$(git diff --cached --patch)
+  fi
+}
+
+# Ask the user if they want to include changes that have not been committed.
+function gather_uncommitted_changes() {
+  echo -n 'Do you want to include the changes'
+  echo -n ' you have yet to commit or stash (y/n)? '
+  read response
+
+  if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+    changes=$(git diff)
+    msg+=${changes}
+  fi
+}
+
+# Ask the user for number of commit changes to include in code review.
+# Returns a list of changes for the given number of commits.
+function gather_commit_changes() {
+  echo -n 'How many previous commits do you want to include? '
+  local count
+  read count
+
+  # Allow hitting enter as a no response.
+  if [ -z "$count" ]; then
+    return
+  fi
+
+  # Validate that the input is a positive integer.
+  if ! [[ "$count" =~ ^[0-9]+$ ]] || [ "$count" -lt 0 ]; then
+    print_error 'Please enter a positive integer for the number of commits.'
+    exit ${ERROR_INVALID_INPUT}
+  fi
+
+  hashes=$(git log --format=%H -n ${count})
+  for h in ${hashes}; do
+    commit_message=$(git show ${h})
+    msg+="${commit_message}"$'\n'
+  done
+}
+
+# Create fifo for chat responses.
+function create_response_fifo() {
+  create_data_dir
+  if [ ! -p ${RESPONSE_FIFO} ]; then
+    mkfifo ${RESPONSE_FIFO}
+  fi
+}
+
+# Delete fifo for chat responses.
+function remove_response_fifo() {
+  if [ -p ${RESPONSE_FIFO} ]; then
+    rm ${RESPONSE_FIFO}
+  fi
+}
+
+# Create response trap to allow user to stop AquaAI.
+function create_response_trap() {
+  trap 'echo "AquaAI has been interrupted...";' SIGINT
+}
+
+# Remove response trap to allow user to exit program.
+function remove_response_trap() {
+  trap - SIGINT
+}
+
+# Get the first message from a saved chat.
+function get_first_chat() {
+  local file_path=${1}
+  source <(cat ${file_path} | grep message_history)
+  message_history=$(echo $message_history | \
+                      jq -r '[.[] | select(.role == "user")][0].content' \
+                      2>/dev/null | sed 's/^"//')
+  echo -e $message_history | sed 's/"$//' | tr -d '\n' | cut -c 1-80 \
+    | sed ':a;N;$!ba;s/\n//g'
+}
+
+# Get an array of all saved chat files.
+function get_save_files() {
+  save_files=()
+  create_data_dir
+
+  for f in $(find "$DATA_DIR" -type f -name "*.chat"); do
+    save_files+=("${f}")
+  done
+}
+
+# Create the data directory if it does not exist.
+function create_data_dir() {
+  if [ ! -d "$DATA_DIR" ]; then
+    mkdir -p "$DATA_DIR"
+  fi
+}
+
+# Save the current chat to a file.
+function save_chat() {
+  create_data_dir
+  local filename=${1}
+
+ if [ -z "$filename" ]; then
+    print_error 'No filename provided.'
+    exit ${ERROR_NO_SAVEFILE}
+  fi
+
+  declare -p selected_model system_prompt \
+          message_history cli_mode > "${DATA_DIR}/${filename}"
+}
+
+# Save the current chat to autosave.
+function autosave() {
+  save_chat 'autosave.chat'
+  echo 'Chat has been auto saved'
+}
+
+# Find all .chat files in DATA_DIR and use fzf to select one.
+function select_chat_file() {
+  selected_file=$(select_chat_with_fzf)
+
+  if [ -z "$selected_file" ]; then
+    echo 'No file selected.'
+    exit ${ERROR_NO_SAVEFILE}
+  fi
+}
+
+# Delete .chat files in DATA_DIR.
+function delete_chat_file() {
+  selected_file=$(select_chat_with_fzf)
+
+  if [ -z "$selected_file" ]; then
+    echo 'No file selected.'
+    exit ${ERROR_NO_SAVEFILE}
+  else
+    local pretty_name=$(get_first_chat ${selected_file})
+    echo -n "do you want to delete '${pretty_name}' (y/n)? "
+    read response
+    if [[ "$response" == 'y' || "$response" == 'yes' ]]; then
+      rm -- "${selected_file}"
+      echo "Deleted '${pretty_name}'"
+    fi
+  fi
+}
+
+# Select saved chat with fzf program.
+function select_chat_with_fzf() {
+  get_friendly_save_names
+
+  local selected_index=$(printf "%s\n" "${friendly_save_files[@]}" \
+                           | cat -n | fzf --with-nth 2.. \
+                           | awk '{print $1}')
+  selected_index=$((${selected_index}-1))
+
+  if [[ -n $selected_index ]]; then
+    echo "${save_files[selected_index]}"
+  fi
+}
+
+# Get an array of the first message in saved chats.
+function get_friendly_save_names() {
+  get_save_files
+  friendly_save_files=()
+  for f in "${save_files[@]}"; do
+    friendly_save_files+=("$(get_first_chat ${f})")
+  done
+}
+
+# Validate site certificate.
+function check_cert() {
+  curl "${CURL_FLAGS[@]}" ${OLLAMA_URL}  2>&1 >/dev/null
+  local ec=$?
+  if [ "${ec}" == '60' ]; then
+    print_error 'unable to get local issuer certificate.'
+    echo 'Install the certificate on the system.'
+    exit ${ERROR_INVALID_SSL}
+  elif [ "${ec}" != '0' ]; then
+    print_error 'unknown ssl error.'
+    exit ${ERROR_UNKNOWN_SSL}
+  fi
+}
+
+# Update chat history
+function update_history() {
+  local role="$1"
+  local content="$2"
+  message_history=$(echo "$message_history" \
+                     | jq --arg role "$role" --arg content \
+                     "$content" '. + [{"role": $role, "content": $content}]')
+}
+
+# Read input from the user.
+function read_user_input() {
+  if [ "${multiline_mode}" == true ]; then
+    msg=$(awk '{if ($0 == "END") exit; else print}')
+  elif [ "${code_review_start}" == true ]; then
+    check_git_directory
+    msg=''
+    gather_uncommitted_changes
+    gather_staged_changes
+    gather_commit_changes
+    code_review_start=false
+  else
+    read msg
+  fi
+}
+
+# Handle input related to CLI mode.
+function handle_cli_mode() {
+  # Check for cli mode
+  if [ ${cli_mode} == true ]; then
+    if [[ -z $msg || $msg == 'run' || $msg == 'r' ]]; then
+      set_clear_color
+      autosave
+      echo
+      local commands=()
+      # Get a list of commands
+      while IFS= read -r line; do
+        commands+=("${line}")
+      done <<< "$last_cmd"
+      for c in "${commands[@]}"; do
+        # Using eval to handle commands that include pipes.
+        if [[ "${c}" == *'|'* ]]; then
+          eval "${c}"
+        else
+          ${c}
+        fi
+      done
+      exit 0
+    fi
+  fi
+}
+
+# Check for editor request.
+function handle_edit() {
+  if [[ $msg == 'edit' || $msg == 'e' ]]; then
+    editor_input
+    set_user_color
+    echo "${msg}"
+  fi
+}
+
+# Check for debug command.
+function handle_debug() {
+  if [[ $msg == 'debug' ]]; then
+    print_debug
+    return 1
+  fi
+  return 0
+}
+
+# Check for save command.
+function handle_save() {
+  if [[ $msg == 'save' || $msg == 's' ]]; then
+    echo "Saving chat history"
+    save_chat "$(date +%Y%m%d%H%M%S).chat"
+    exit 0
+  fi
+}
+
+# Chat converstation loop.
+function chat_loop() {
+  check_if_model_exists ${selected_model}
+  update_history 'system' "$system_prompt"
+  while true; do
+    chat
+  done
+}
+
+# Main chat loop.
+function chat() {
+  # Get user input.
+  set_user_color
+  print_user_start_message
+  read_user_input
+  echo
+
+  # Handle user input.
+  local rc=0
+  handle_edit
+  handle_cli_mode
+  handle_debug
+  rc=$((rc + $?))
+  handle_save
+  rc=$((rc + $?))
+  if [ "$rc" -ne 0 ]; then
+    return
+  fi
+  update_history 'user' "${msg}"
+
+  # Prepare JSON payload.
+  JSON_PAYLOAD=$(jq -n \
+    --arg model "$selected_model" \
+    --argjson messages "$message_history" \
+      '{model: $model,  messages: $messages, stream: true}')
+
+  set_ai_color
+  print_ai_start_message
+
+  create_response_fifo
+  create_response_trap
+  # Render to console.
+  if [ "${rich_format_mode}" == true ]; then
+    cat ${RESPONSE_FIFO} | ${rich_format_path} &
+  else
+    cat ${RESPONSE_FIFO} &
+  fi
+  local flags=("${CURL_FLAGS[@]}")
+  local chat_path=''
+  local filter=''
+  if [ "${openai_api}" == true ]; then
+    flags+=(-H "Content-Type: application/json")
+    chat_path='/chat/completions'
+    filter='.choices[].delta.content // empty'
+  else
+    chat_path='/api/chat'
+    filter='.message.content // empty'
+  fi
+  local response=$(curl "${flags[@]}" "${OLLAMA_URL}${chat_path}" \
+    -d "${JSON_PAYLOAD}" | stdbuf -o0 sed 's/^data: //' \
+    | stdbuf -o0 jq -j "${filter}" 2>/dev/null \
+    | tee ${RESPONSE_FIFO})
+  wait
+  # Newline for AI response.
+  if [ "${rich_format_mode}" != true ]; then
+    echo
+  fi
+  # One line reponses do not print out when formatted with Streamdown.
+  if [[ "$rich_format_path" == *"streamdown"* && \
+    "${rich_format_mode}" == true ]]; then
+    local wc=$(echo "${response}" | wc -l)
+    if [ ${wc} -eq 1 ]; then
+      echo "${response}"
+    fi
+  fi
+  remove_response_trap
+  remove_response_fifo
+  echo
+  update_history "assistant" "${response}"
+  last_cmd="${response}"
+}
+
+#===============================================================================
+
+check_requirements
+if [ "${insecure_mode}" == true ]; then
+  CURL_FLAGS+=('-k')
+else
+  check_cert
+fi
+if [ "${openai_api}" == true ]; then
+  CURL_FLAGS+=(-H "Authorization: Bearer ${key}")
+fi
+cmd=chat_loop
+set_default_agent
+
+# Check arguments
+for i in "$@"; do
+  case $i in
+    -h|--help)
+      cmd=print_help
+      ;;
+    -l|--list)
+      cmd=print_models
+      ;;
+    --delete)
+      delete_chat_file
+      exit 0
+      ;;
+    --load)
+      select_chat_file
+      source ${selected_file}
+      cmd=chat_loop
+      ;;
+    --restore)
+      if [ ! -e "${DATA_DIR}/autosave.chat" ]; then
+        print_error 'auto save does not exit'
+        exit ${ERROR_NO_AUTOSAVE}
+      fi
+      source "${DATA_DIR}/autosave.chat"
+      cmd=chat_loop
+      ;;
+    # Modes
+    --bash)
+      set_coding_model
+      set_bash_agent
+      cmd=chat_loop
+      ;;
+    --cli)
+      set_coding_model
+      set_cli_agent
+      cmd=chat_loop
+      cli_mode=true
+      rich_format_mode=false
+      ;;
+    --code-review)
+      set_coding_model
+      set_code_review_agent
+      code_review_start=true
+      cmd=chat_loop
+      ;;
+    --git)
+      set_coding_model
+      set_git_agent
+      cmd=chat_loop
+      cli_mode=true
+      rich_format_mode=false
+      ;;
+    -r|--reason)
+      set_reasoning_model
+      cmd=chat_loop
+      ;;
+    --regex)
+      set_coding_model
+      set_regex_agent
+      cmd=chat_loop
+      rich_format_mode=false
+      ;;
+    -ha|--home-assistant)
+      set_coding_model
+      set_home_assistant_agent
+      cmd=chat_loop
+      rich_format_mode=false
+      ;;
+    # Other
+    -*|--*)
+      echo "Unknown option ${i}"
+      print_help
+      exit ERROR_UNKNOWN_OPTION
+      ;;
+  esac
+done
+
+${cmd}
+

home/bin/executable_connect-nas.sh

@@ -0,0 +1,10 @@
+#! /bin/bash
+
+# Load user settings from config file.
+. ~/.config/settings.conf
+
+if nc -z $nasip 80 2>/dev/null; then
+    mount /mnt/share/lNAS
+else
+    echo "$nasip is unreachable"
+fi

home/bin/executable_get-mouse-battery.sh

@@ -0,0 +1,11 @@
+#! /bin/bash
+
+mouseState=$(upower -i /org/freedesktop/UPower/devices/battery_hidpp_battery_0)
+batteryPercentage=$(echo $mouseState | grep percentage | grep -Po '\d+%')
+charging=$(echo $mouseState | grep 'state: charging')
+
+if [ ! -z "$charging" ]; then
+    echo Charging
+else
+    echo $batteryPercentage
+fi

home/bin/executable_hosts-file.sh

@@ -0,0 +1,8 @@
+#! /bin/bash
+
+if [[ $* == *-b* ]]; then
+    cp /etc/hosts ~/.config/.dotfiles/hosts
+else
+    sudo cp ~/.config/.dotfiles/hosts /etc/hosts
+fi
+       

home/bin/executable_i3wm-config-gen.sh

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# Load user settings from config file.
+. ~/.config/settings.conf
+
+cat ~/.config/i3/shared.conf ~/.config/i3/${computer}.conf > ~/.config/i3/config
+
+if command -v i3-msg &> /dev/null; then
+    i3-msg reload
+elif command -v swaymsg &> /dev/null; then
+    swaymsg reload
+fi

home/bin/executable_i3wm-for-window-gen.sh

@@ -0,0 +1,8 @@
+#! /bin/bash
+
+# A script to make creating i3wm window actions easier.
+
+info=$(xprop)
+title=$(echo "$info" | grep "WM_NAME(STRING)" | cut -d "\"" -f2 | cut -d "\"" -f1)
+class=$(echo "$info" | grep "WM_CLASS(STRING)" | cut -d "\"" -f2 | cut -d "\"" -f1)
+echo for_window [class=\"$class\" title=\"$title\"]

home/bin/executable_lock.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# i3lock blurred screen inspired by /u/patopop007 and the blog post
+# http://plankenau.com/blog/post-10/gaussianlock
+
+# Timings are on an Intel i7-2630QM @ 2.00GHz
+
+# Dependencies:
+# imagemagick
+# i3lock
+# scrot (optional but default)
+
+IMAGE=/tmp/i3lock.png
+SCREENSHOT="scrot $IMAGE" # 0.46s
+
+# Alternate screenshot method with imagemagick. NOTE: it is much slower
+# SCREENSHOT="import -window root $IMAGE" # 1.35s
+
+# Here are some imagemagick blur types
+# Uncomment one to use, if you have multiple, the last one will be used
+
+# All options are here: http://www.imagemagick.org/Usage/blur/#blur_args
+BLURTYPE="0x5" # 7.52s
+#BLURTYPE="0x2" # 4.39s
+#BLURTYPE="5x2" # 3.80s
+#BLURTYPE="2x8" # 2.90s
+#BLURTYPE="2x3" # 2.92s
+
+# Get the screenshot, add the blur and lock the screen with it
+$SCREENSHOT
+convert $IMAGE -blur $BLURTYPE $IMAGE
+i3lock -i $IMAGE
+rm $IMAGE

home/bin/executable_toggle-graphics.sh

@@ -0,0 +1,17 @@
+#! /bin/bash
+
+# Script to toggle graphical
+
+defTarget=$(systemctl get-default)
+
+if [[ $defTarget == 'graphical.target' ]]
+then
+    echo 'Changing default target to nongraphical shell'
+    sudo systemctl set-default multi-user.target
+else
+    echo 'Changing default target to graphical shell'
+    sudo systemctl set-default graphical.target
+fi
+echo
+echo 'Default target changed to '$(systemctl get-default)
+echo 'Please reboot for the change to take effect'

home/bin/executable_trackpad-toggle.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# Get device id of Synaptics TrackPad
+id=$(xinput list --id-only 'SynPS/2 Synaptics TouchPad')
+
+# Enables TrackPad
+trackpadEnable() {
+    xinput set-prop $id "Device Enabled" 1
+    exit
+}
+
+# Disables TrackPad
+trackpadDisable() {
+    xinput set-prop $id "Device Enabled" 0
+    exit
+}
+
+# Checks for disable flag
+if [ ! -z $1 ] && [ $1 == '-d' ]; then
+    echo flag worked
+    trackpadDisable
+fi
+
+# Convert to an arry
+read -a trackPadState <<< "$(xinput --list-props $id | grep "Device Enabled")"
+devEnabled=${devString_array[3]}
+
+# Flip the state of the TrackPad
+if [ ${trackPadState[3]} -eq 1 ]; then
+    trackpadDisable
+else
+    trackpadEnable
+fi

home/bin/executable_update.sh

@@ -0,0 +1,66 @@
+#! /bin/bash
+
+# This script is a catch all program updater.
+
+# DNF Updater
+function dnfUpdate {
+    if command -v dnf &> /dev/null; then
+	echo Updating DNF...
+	sudo dnf update #--exclude=wine*
+    fi
+}
+
+# Apt Updater
+function aptUpdate {
+    if command -v apt &> /dev/null; then
+	echo Updating APT...
+	sudo apt update
+	sudo apt upgrade
+    fi
+}
+
+# Flatpack Updater
+function flatpakUpdate {
+    if command -v flatpak &> /dev/null; then
+	echo Updating Flatpak...
+	flatpak uninstall --unused
+	flatpak update
+    fi
+}
+
+# Appimage Updater
+function appimageUpdate {
+    am update
+}
+
+# Checks if a program is installed and if it is runs an updater script
+function updateProgram {
+    if command -v $1 &> /dev/null; then
+	sh $2
+    fi
+}
+
+# Manually installed programs updater
+function manualUpdate {
+    if command -v dnf &> /dev/null; then
+	echo Updating manually installed programs...
+	SCRIPT_PATH="$HOME/bin/installers"
+	updateProgram bitwig-studio $SCRIPT_PATH/bitwig-install.sh &
+	updateProgram /opt/dragonframe5/bin/Dragonframe $SCRIPT_PATH/dragonframe-install.sh &
+	updateProgram reaper $SCRIPT_PATH/reaper-install.sh &
+	updateProgram /opt/resolve/bin/resolve $SCRIPT_PATH/resolve-install.sh &
+	updateProgram /opt/keeweb/keeweb $SCRIPT_PATH/keeweb-install.sh &
+	updateProgram yabridgectl $SCRIPT_PATH/yabridge-install.sh &
+	wait
+    fi
+}
+
+dnfUpdate
+aptUpdate
+echo ''
+flatpakUpdate
+echo ''
+appimageUpdate
+echo ''
+manualUpdate
+

home/bin/frc-photo-checklist.py

@@ -0,0 +1,173 @@
+#!/usr/bin/env python3
+
+# Program to create a photo checklist of a given frc event.
+
+import configparser
+import datetime as dt
+import re
+import operator
+import os
+import sys
+import tbapy
+import todoist
+
+# getProjectID() returns the project id that matches the name given.
+def getProjectID(api, name):
+    for project in api.state['projects']:
+        if project['name'] == name:
+            return project['id']
+    print('Error: No project with the name {} found'.format(name))
+    exit(1)
+
+# getChecklistName()
+def getChecklistName(evemt):
+    return '{} Photos'.format(event['name'])
+
+# getEventListID() returns the id of the checklist for the event and if there is none
+# returns -1.
+def getEventListID(items, event):
+    for item in items:
+        if item['content'] == getChecklistName(event):
+            return item['id']
+    return -1
+
+# matchToTeamList() converts a match to two lists of teams
+def matchToTeamList(match):
+    return match['alliances']['red']['team_keys'], match['alliances']['blue']['team_keys']
+
+# createChecklistItem() creates a checklist item of the highest priority.
+def createChecklistItem(name, api, projectID, item, date):
+    return api.items.add(name,
+                         project_id=projectID,
+                         parent_id=item['id'],
+                         date_string=date,
+                         priority=4)
+
+# createPhotoChecklistItem() creates a checklist item that requires a photo.
+def createPhotoChecklistItem(name, api, projectID, item, date):
+    return createChecklistItem('Take photo of **{}**'.format(name),
+                               api, projectID, item, date)
+
+# createPitList() creates a checklist for taking photos of a teams pit.
+def createPitList(api, teams, projectID, checklist, date):
+    item = api.items.add('**Take** Pit Photos',
+                         project_id=projectID,
+                         parent_id=checklist['id'],
+                         date_string=date,
+                         priority=3)
+    for team in teams:
+        createChecklistItem('Pit photo of **{}** {}'.format(team['team_number'], team['nickname']),
+                            api, projectID, item, date)
+        
+# createGroupsList() creates a checklist of the different groups of volenteers.
+def createGroupsList(api, projectID, checklist, date):
+    item = api.items.add('Groups',
+                         project_id=projectID,
+                         parent_id=checklist['id'],
+                         date_string=date,
+                         priority=3)
+    groups = ['Judges', 'Robot Inspectors', 'Referees', 'Safety Inspectors',
+              'Field Reset', 'Queuers', 'CSAs', 'VC and Pit Admin']
+    for group in groups:
+        createPhotoChecklistItem(group, api, projectID, item, date)
+
+# createWinnersList() creates a checklist of the winners of an event.
+def createWinnersList(api, projectID, checklist, date):
+    item = api.items.add('Winners',
+                         project_id=projectID,
+                         parent_id=checklist['id'],
+                         date_string=date,
+                         priority=3)
+    groups = ['Chairman\'s award', 'Engineering Inspiration', 'Rookie All-Star', 'Winning Alliance',
+              'Winning Team 1', 'Winning Team 2', 'Winning Team 3']
+    for group in groups:
+        createPhotoChecklistItem(group, api, projectID, item, date)
+
+# createRobotList() creates a checklist for taking photos of a team's robot.
+def createRobotList(api, teams, projectID, checklist, date):
+    item = api.items.add('**Take** Robot Photos',
+                         project_id=projectID,
+                         parent_id=checklist['id'],
+                         date_string=date,
+                         priority=3)
+    for team in teams:
+        createChecklistItem('Robot photo of **{}** {}'.format(team['team_number'], team['nickname']),
+                            api, projectID, item, date)
+        
+# Parse settings config
+configString = '[Settings]\n' + open('../settings.conf').read()
+configParser = configparser.RawConfigParser()
+configParser.read_string(configString)
+
+# Load needed credentials
+tbaKey = configParser.get('Settings', 'TBAKey')
+todoistToken = configParser.get('Settings', 'TodoistToken')
+
+# Setup Todoist
+api = todoist.TodoistAPI(todoistToken)
+api.sync()
+projectID = getProjectID(api, '🤖 Robotics')
+items = api.state['items']
+
+# Setup the Blue Alliance
+tba = tbapy.TBA(tbaKey)
+eventKey = sys.argv[1]
+event = tba.event(eventKey)
+setupDay = event['start_date']
+day1 = (dt.datetime.strptime(setupDay, '%Y-%m-%d') + dt.timedelta(days=1)).strftime('%Y-%m-%d')
+day2 = event['end_date']
+teams = sorted(tba.event_teams(eventKey), key=operator.attrgetter('team_number'))
+
+def firstMatch(team, matches):
+    for match in matches:
+        red, blue = matchToTeamList(match)
+        if team in red:
+            return match, 'red'
+        elif team in blue:
+            return match, 'blue'
+    return None, None
+
+# Check if list already exists
+eventListID = getEventListID(items, event)
+if eventListID == -1:
+    # Create checklist
+    checklist = api.items.add(getChecklistName(event),
+                              project_id=projectID,
+                              date_string=day2,
+                              priority=2)
+    # Setup
+    createPitList(api, teams, projectID, checklist, setupDay)
+    createChecklistItem('**Schedule** Judges photo', api, projectID, checklist, setupDay)
+    createChecklistItem('**Schedule** Inspectors photo', api, projectID, checklist, setupDay)
+    createChecklistItem('**Schedule** Seniors photo', api, projectID, checklist, setupDay)
+    createGroupsList(api, projectID, checklist, setupDay)
+    # Day 1
+    createPhotoChecklistItem('Guest Speakers', api, projectID, checklist, day1)
+    createRobotList(api, teams, projectID, checklist, day1)
+    # Day 2
+    createPhotoChecklistItem('Guest Speakers', api, projectID, checklist, day2)
+    createPhotoChecklistItem('Mentors after parade', api, projectID, checklist, day2)
+    createPhotoChecklistItem('Seniors', api, projectID, checklist, day2)
+    createPhotoChecklistItem('Alliances Representatives', api, projectID, checklist, day2)
+    createWinnersList(api, projectID, checklist, day2)
+    createChecklistItem('**Email** guest speakers and winners photos', api, projectID, checklist, day2)
+else:
+    print('List already created')
+    matches = sorted(tba.event_matches(eventKey), key=operator.attrgetter('time'))
+    if not matches:
+        print('No match schedule yet')
+    else:
+        photoParentID = [item['id'] for item in items if 'parent_id' in item
+                         and item['parent_id'] == eventListID
+                         and 'Robot Photos' in item['content']][0]
+        robotPhotoList = [item for item in items if 'Robot photo of' in item['content']
+                          and item['parent_id'] == photoParentID]
+        for robot in robotPhotoList:
+            if 'match' not in robot['content']:
+                team = 'frc{}'.format(re.findall(r'\d+', robot['content'])[0])
+                match, side = firstMatch(team, matches)
+                if match != None:
+                    matchNumber = match['match_number']
+                    matchTime = dt.datetime.fromtimestamp(match['time']).strftime('%Y-%m-%d %I:%M %p')
+                    robot.update(date_string=matchTime, content='{} match {} {}'.format(robot['content'], matchNumber, side))
+api.commit()

home/bin/homeassistant.py

@@ -0,0 +1,142 @@
+#!/usr/bin/env python3
+
+# Python wrapper for REST API for Home Assistant.
+
+from requests import get, post
+import json
+
+class HomeAssistant(object):
+
+    # Initalizes Home Assistant API wrapper.
+    def __init__(self, ip, token):
+        self.url = 'http://{}:8123'.format(ip)
+        self.headers = {
+            'Authorization': 'Bearer {}'.format(token),
+            'content-type': 'application/json',
+        }
+
+    # Sends post requests.
+    def postService(self, domain, service, data):
+        response = post("{}/api/services/{}/{}".format(self.url,
+                                                       domain,
+                                                       service),
+                        headers=self.headers, data=json.dumps(data))
+        response.raise_for_status()
+        return response
+
+    # Sends get requests and turns requested data.
+    def getRequest(self, domain):
+        response = get("{}/api/{}".format(self.url, domain),
+                        headers=self.headers)
+        return json.loads(response.text)
+
+    # Returns a message if the API is up and running.
+    def getAPI(self):
+        return self.getRequest('')
+
+    # Returns the current configuration
+    def getConfig(self):
+        return self.getRequest('config')
+
+    # Returns basic information about the Home Assistant instance.
+    def getDiscoveryInfo(self):
+        return self.getRequest('discovery_info')
+
+    # Returns an array of event objects. Each event object contains
+    # event name and listener count.
+    def getEvents(self):
+        return self.getRequest('events')
+
+    # Returns an array of service objects. Each object contains the
+    # domain and which services it contains.
+    def getServices(self):
+        return self.getRequest('services')
+
+    # Returns an array of state changes in the past. Each object contains
+    # further details for the entities.
+    def getHistory(self,
+                   minimumResponse=False,
+                   entityId='',
+                   startTime='',
+                   endTime='',
+                   significantChangesOnly=False):
+        options=''
+        if startTime:
+            options = '/' + startTime
+        options += '?'
+        if endTime:
+            options += '&end_time=' + endTime
+        if minimumResponse:
+            options += '&minimal_response'
+        if entityId:
+            options += '&filter_entity_id=' + entityId
+        if significantChangesOnly:
+            options += '&significant_changes_only'
+        return self.getRequest('history/period'+options)
+
+    # Returns an array of logbook entries.
+    def getLogbook(self, entityId='', startTime='', endTime=''):
+        options=''
+        if startTime:
+            options = '/' + startTime
+        options += '?'
+        if endTime:
+            options += '&end_time=' + endTime
+        if entityId:
+            options += '&entity=' + entityId
+        return self.getRequest('logbook'+options)
+    
+    # Returns an array of state objects or  a state object for specified
+    # entity_id. Each state has the following attributes: entity_id, state,
+    # last_changed and attributes.
+    def getState(self, entityId=''):
+        if entityId:
+            entityId = '/' + entityId
+        return self.getRequest('states' + entityId)
+
+    # Retrieve all errors logged during the current session of Home Assistant.
+    def getErrorLog(self):
+        return self.getRequest('error_log')
+
+    # Returns the data (image) from the specified camera entity_id.
+    def getCameraProxy(self, entityId):
+        return self.getRequest('camera_proxy/' + entityId)
+
+    # Runs a Home Assistant scene.
+    def runScene(self, entityId):
+        data = {'entity_id': entityId}
+        self.postService('scene', 'turn_on', data)
+
+    # Runs a Home Assistant script.
+    def runScript(self, entityId):
+        data = {'entity_id': entityId}
+        self.postService('script', 'turn_on', data)
+
+    # Sets the brightness level of a device.
+    def setLevel(self, entityId, level):
+        data = {'entity_id': entityId, 'brightness_pct': level}
+        self.postService('homeassistant', 'turn_on', data)
+
+    # Turns a device off.
+    def turnOn(self, entityId):
+        data = {'entity_id': entityId}
+        self.postService('homeassistant', 'turn_on', data)
+
+    # Turns a device on.
+    def turnOff(self, entityId):
+        data = {'entity_id': entityId}
+        self.postService('homeassistant', 'turn_off', data)
+
+    # Turns a device of the given power state.
+    def setOnOff(self, entityId, power):
+        if power:
+            self.turnOn(entityId)
+        else:
+            self.turnOff(entityId)
+
+    # Toggles power state of a given device.
+    def togglePower(self, entityId):
+        if self.getState(entityId)['state'] == 'off':
+            self.turnOn(entityId)
+        else:
+            self.turnOff(entityId)

home/bin/i3-mouse.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python3
+import i3ipc
+import sys
+import os
+import time
+import pyautogui
+from enum import Enum
+
+# Enum for mouse direction
+class Direction(Enum):
+    UP = 1
+    LEFT = 2
+    RIGHT = 3
+    DOWN = 4
+    NONE = 5
+
+# getPoints() returns x and y movement of mouse
+def getPoints():
+    sen = 10
+    t = 0
+    delay = 0.01
+
+    x,y = pyautogui.position()
+    while True:
+        time.sleep(delay)
+        t += delay
+        if t > 0.5:
+            return
+        xp, yp = pyautogui.position()
+        dx = x - xp
+        dy = y - yp
+        if abs(dx) > sen or abs(dy) > sen:
+            break
+    return dx, dy
+
+#pointsToDirection() converts mouse movement points to a direction
+def pointsToDirection(points):
+    if points is None:
+        return
+    x, y = points
+    if abs(x) > abs(y):
+        if x < 0:
+            return Direction.RIGHT
+        else:
+            return Direction.LEFT
+    else:
+        if y > 0:
+            return Direction.UP
+        else:
+            return Direction.DOWN
+
+i3 = i3ipc.Connection()
+focused = i3.get_tree().find_focused()
+command = sys.argv[1]
+
+if command in ['back', 'forward']:
+   if focused.window_instance not in ['overwatch.exe', 'hl2_linux']:
+      if sys.argv[1] == 'forward':
+         i3.command('workspace prev_on_output')
+      else:
+         i3.command('workspace next_on_output')
+
+elif command == 'thumb':
+   direction = pointsToDirection(getPoints())
+   if direction == Direction.UP:
+      i3.command('move up')
+   elif direction == Direction.RIGHT:
+      i3.command('move right')
+   elif direction == Direction.DOWN:
+      i3.command('move down')
+   elif direction == Direction.LEFT:
+      i3.command('move left')

home/bin/installers/blackmagic-parser.py

@@ -0,0 +1,49 @@
+import json
+import os
+import re
+import urllib.request
+
+# getJSONData returns JSON data from Blackmagic Design's website.
+def getJSONData():
+    with urllib.request.urlopen('https://www.blackmagicdesign.com/api/support/us/downloads.json') as url:
+        return json.loads(url.read().decode())
+
+# getDownloads() returns a list of downloads.
+def getDownloads():
+    return getJSONData()['downloads']
+
+# getResolveStudioDownloads() returns a list of DaVinci Resolve Studio downlaods.
+def getResolveStudioDownloads():
+    return [d for d in getDownloads() if 'davinci-resolve-and-fusion' in d['relatedFamilies'][0] and
+            'Studio' in d['name'] and 'Resolve' in d['name']]
+
+# filterOnlyLinuxSupport() filters a list of downloads to only ones that
+# support Linux.
+def filterOnlyLinuxSupport(downloads):
+    return [d for d in downloads if 'Linux' in d['platforms']]
+
+# getLinuxURL() returns the Linux download info.
+def getLinuxURL(download):
+    return download['urls']['Linux'][0]
+
+# getURLId() returns the download id.
+def getURLId(url):
+    return url['downloadId']
+
+# getURLVersion() returns the url version number.
+def getURLVersion(url):
+    if 'Beta' in url['downloadTitle']:
+        beta = re.search('Beta \\d+', url['downloadTitle'])
+        if beta:
+            beta = re.search('\\d+', beta.group()).group()
+    else:
+        beta = '99'
+    return '{}.{}.{}.{}'.format(url['major'], url['minor'], url['releaseNum'], beta)
+
+# getDownloadId() returns downlaod id hash.
+def getDownloadId(download):
+    return download['id']
+
+for d in filterOnlyLinuxSupport(getResolveStudioDownloads()):
+    linux = getLinuxURL(d)
+    print(getURLVersion(linux), getURLId(linux), getDownloadId(d))

home/bin/installers/executable_bitwig-install.sh

@@ -0,0 +1,27 @@
+#! /bin/bash
+
+# Automatic install script for Bitwig Studio
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+site='https://www.bitwig.com/download/'
+bitwig=$(searchProgramInstalled bitwig-studio)
+bitwigVersion=$(echo $bitwig | awk '{print $2;}'| filterVersion)
+urlVersion=$(curl -sL $site | grep 'Bitwig Studio' | filterVersion | head -n 1)
+url=https://downloads.bitwig.com/stable/$urlVersion/bitwig-studio-$urlVersion.deb
+
+checkUptoDate Bitwig $bitwigVersion $urlVersion
+
+echo Installing Bitwig Studio $urlVersion
+
+# Setting up and downloading package
+downloadPackage bitwig $url $(basename $url)
+
+# Converting to Fedora friendly package
+echo Creating rpm package
+package=$(sudo alien -r $(basename $url) | awk '{print $1;}')
+
+# Installing package
+sudo rpm -Uvh --nodeps --force $package
+sudo ln -s /usr/lib64/libbz2.so.1.0** /usr/lib64/libbz2.so.1.0

home/bin/installers/executable_dragonframe-install.sh

@@ -0,0 +1,41 @@
+#! /bin/bash
+
+# Automatic install script for Dragonframe
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+# Fix issue with shared library files.
+function postInstallFix() {
+  sudo rm /opt/dragonframe2024/lib/libtiff.so.5
+  sudo rm /opt/dragonframe2024/lib/libudev.so.0
+  sudo ln -s -f /lib64/libudev.so.1 /opt/dragonframe2024/lib/libudev.so.0
+}
+
+dragonframe=$(searchProgramInstalled dragonframe20* | \
+		  awk 'END {print $(NF-2), $(NF-1), $NF}')
+dragonframeVersion=$(echo $dragonframe | awk '{print $2;}' | filterVersion)
+agent='Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:104.0) Gecko/20100101 Firefox/104.0'
+url=$(curl -s https://www.dragonframe.com/downloads/ \
+	   -A $agent | \
+	  grep .rpm | grep downloadButton | grep downloadButton | \
+	  grep -io 'https://[a-z0-9+-._/]*.rpm' | head -n 1)
+urlVersion=$(echo $url | awk -F "-" '{ print $2 }')
+
+# Check if installed to the most recent version
+checkUptoDate dragonframe $dragonframeVersion $urlVersion
+echo Installing Dragonframe $urlVersion
+
+# Setting up and downloading package
+mkdir -p ~/Downloads/installers/dragonframe
+cd ~/Downloads/installers/dragonframe
+
+
+installer=$(basename "$url")
+curl -s $url \
+     -A $agent \
+     -o $installer
+
+# Install package
+sudo dnf install $installer -y
+

home/bin/installers/executable_install-lib.sh

@@ -0,0 +1,62 @@
+# Program version number comparison.
+function versionGreater() {
+    if [[ $1 == $2 ]];then
+        return 0
+    fi
+    local IFS=.
+    local i ver1=($1) ver2=($2)
+    # fill empty fields in ver1 with zeros
+    for ((i=${#ver1[@]}; i<${#ver2[@]}; i++)); do
+        ver1[i]=0
+    done
+    for ((i=0; i<${#ver1[@]}; i++)); do
+        if [[ -z ${ver2[i]} ]]; then
+            # fill empty fields in ver2 with zeros
+            ver2[i]=0
+        fi
+        if ((10#${ver1[i]} > 10#${ver2[i]})); then
+            return 1
+        fi
+        if ((10#${ver1[i]} < 10#${ver2[i]})); then
+            return 2
+        fi
+    done
+    return 0
+}
+
+# Check if installed to the most recent version.
+function checkUptoDate() {
+    if versionGreater $2 $3; then
+	echo $1 is up to date. Installed version $2 web version $3
+	exit
+    else
+	echo Updating $1 from $2 to $3...
+    fi
+}
+
+# Returns installed programs with a given name.
+function searchProgramInstalled() {
+    dnf list -q | grep $1 
+}
+
+# Filters string to Semantic Versioning.
+function filterVersion() {
+    grep -Po -m 1 '\d{1,4}\.\d{1,4}\.*\d{0,4}'
+}
+
+# Downloads a file to the given download directory with
+# the given name.
+function downloadPackage() {
+    mkdir -p ~/Downloads/installers/${1}
+    cd ~/Downloads/installers/${1}
+    wget -O ${3} ${2}
+}
+
+# Get package manager
+function packageManager() {
+    if command -v dnf &> /dev/null; then
+	echo dnf
+    elif command -v apt &> /dev/null; then
+	echo apt
+    fi
+}

home/bin/installers/executable_keeweb-install.sh

@@ -0,0 +1,25 @@
+#! /bin/bash
+
+# Automatic install script for KeeWeb password manager
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+keeweb=$(searchProgramInstalled KeeWeb)
+keewebVersion=$(echo $keeweb | awk '{print $2;}' | filterVersion)
+url=$(curl -s https://github.com/keeweb/keeweb/releases | grep .rpm | grep -Po '(?<=href=")[^"]*.rpm'| head -n 1)
+url='https://github.com'$url
+urlVersion=$(echo $url | filterVersion | head -n 1)
+
+# Check if installed to the most recent version
+checkUptoDate keeweb $keewebVersion $urlVersion
+echo Installing KeeWeb $urlVersion
+
+# Setting up and downloading package
+mkdir -p ~/Downloads/installers/keeweb
+cd ~/Downloads/installers/keeweb
+wget $url
+
+# Install package
+sudo dnf install $(basename $url) -y
+

home/bin/installers/executable_reaper-install.sh

@@ -0,0 +1,26 @@
+#! /bin/bash
+
+# Automatic install script for Reaper
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+# Get download url
+reaperVersion=$(head /opt/REAPER/whatsnew.txt | filterVersion)
+reaperSite='https://www.reaper.fm'
+downloadPage=$(curl -s "${reaperSite}/download.php")
+urlVersion=$(echo "$downloadPage" | grep -A 2 'Linux x86_64' | filterVersion)
+url="${reaperSite}/$(echo "$downloadPage" | grep linux_x86_64 | grep -Po '(?<=href=")[^"]*'| head -n 1)"
+
+checkUptoDate Reaper $reaperVersion $urlVersion
+
+# Setting up and downloading package
+downloadPackage reaper $url $(basename $url)
+
+# Install Reaper. Requires user input
+tar -xf $(basename $url)
+reaperDir=reaper_linux_x86_64
+sudo sh ./$reaperDir/install-reaper.sh --install /opt --integrate-sys-desktop --usr-local-bin-symlink
+
+# Delete extracted directory
+rm -rd $reaperDir

home/bin/installers/executable_resolve-install.sh

@@ -0,0 +1,102 @@
+#! /bin/bash
+
+# Automatic install script for DaVinci Resolve
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+# Graphics card fix
+function graphicsCardFix() {
+  sudo rm /etc/OpenCL/vendors/mesa.icd
+  sudo rm /etc/OpenCL/vendors/pocl.icd
+}
+
+# gLib fix
+function glibFix() {
+  sudo mkdir /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libglib-2.0.so* /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgio-2.0.so*  /opt/resolve/libs/_disabled
+  sudo mv /opt/resolve/libs/libgmodule-2.0.so* /opt/resolve/libs/_disabled
+}
+
+versionFile=/opt/resolve/version.txt
+
+resolveVersion=$(cat /opt/resolve/docs/ReadMe.html | grep 'DaVinci Resolve Studio' | filterVersion)
+url=$(python $(dirname ${BASH_SOURCE[0]})/blackmagic-parser.py | head -n 1)
+urlVersion=$(echo $url |  awk '{print $1;}')
+downloadID=$(echo $url |  awk '{print $2;}')
+referId=$(echo $url |  awk '{print $3;}')
+
+# Check for beta
+major=$(echo $urlVersion | cut -d. -f1)
+minor=$(echo $urlVersion | cut -d. -f2)
+micro=$(echo $urlVersion | cut -d. -f3)
+beta=$(echo $urlVersion | cut -d. -f4)
+
+if [ "$beta" == '99' ]; then
+    packageName="DaVinci_Resolve_Studio_${major}.${minor}"
+elif [ -n "$beta" ]; then
+    packageName="DaVinci_Resolve_Studio_${major}.${minor}b${beta}"
+else
+    packageName="DaVinci_Resolve_Studio_${urlVersion}"
+fi
+
+# Get version if beta installed
+if [ -n $resolveVersion ]; then
+    resolveVersion=$(cat $versionFile)
+fi
+
+checkUptoDate Resolve $resolveVersion $urlVersion
+
+downloadUrl="https://www.blackmagicdesign.com/api/register/us/download/${downloadID}"
+useragent="User-Agent: Mozilla/5.0 (X11; Linux) \
+                        AppleWebKit/537.36 (KHTML, like Gecko) \
+                        Chrome/77.0.3865.75 \
+                        Safari/537.36"
+reqjson="{ \
+    \"firstname\": \"Fedora\", \
+    \"lastname\": \"Linux\", \
+    \"email\": \"user@getfedora.org\", \
+    \"phone\": \"919-555-7428\", \
+    \"country\": \"us\", \
+    \"state\": \"North Carolina\", \
+    \"city\": \"Raleigh\", \
+    \"product\": \"DaVinci Resolve\" \
+}"
+zipUrl="$(curl \
+            -s \
+            -H 'Host: www.blackmagicdesign.com' \
+            -H 'Accept: application/json, text/plain, */*' \
+            -H 'Origin: https://www.blackmagicdesign.com' \
+            -H "$useragent" \
+            -H 'Content-Type: application/json;charset=UTF-8' \
+            -H "Referer: https://www.blackmagicdesign.com/support/download/${referId}/Linux" \
+            -H 'Accept-Encoding: gzip, deflate, br' \
+            -H 'Accept-Language: en-US,en;q=0.9' \
+            -H 'Authority: www.blackmagicdesign.com' \
+            -H 'Cookie: _ga=GA1.2.1849503966.1518103294; _gid=GA1.2.953840595.1518103294' \
+            --data-ascii "$reqjson" \
+            --compressed \
+            "$downloadUrl")"
+
+# Setting up and downloading package
+downloadPackage resolve $zipUrl "${packageName}.zip"
+
+# Installing package
+sudo dnf install libxcrypt-compat
+unzip -o $packageName
+installerName="DaVinci_Resolve_Studio_${major}.${minor}.${micro}"
+if [ ! -f ./*${installerName}_Linux.run ]; then
+    installerName="${packageName}"
+fi
+echo "Installing ./*${installerName}_Linux.run"
+chmod +x ./*${installerName}_Linux.run
+sudo SKIP_PACKAGE_CHECK=1 ./*${installerName}_Linux.run -i -y
+
+# Version number backup
+sudo echo $urlVersion > $versionFile
+
+glibFix
+
+# Keyboard mapping fix
+setxkbmap -option 'caps:super'

home/bin/installers/executable_rust-install.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+sudo $(packageManager) install rust cargo

home/bin/installers/executable_superslicer-install.sh

@@ -0,0 +1,41 @@
+#!/usr/bin/env bash
+
+# Automatic install script for SuperSlicer.
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+function desktopFile() {
+    echo 'Creating desktop file'
+    echo '[Desktop Entry]' > $1
+    echo "Name=${2}" >> $1
+    echo 'Comment=3D printing slicer' >> $1
+    echo "Exec=${3}" >> $1
+    echo 'Icon=' >> $1
+    echo 'Type=Application' >> $1
+    echo 'Terminal=false' >> $1
+}
+
+program='SuperSlicer'
+programPath="${HOME}/.local/bin/${program}.AppImage"
+programVersion=$($programPath --help | grep SuperSlicer | filterVersion)
+url=$(curl -s https://api.github.com/repos/supermerill/SuperSlicer/releases)
+urlVersion=$(echo $url | grep tag_name | filterVersion | head -n 1)
+url=$(echo "$url" | grep browser_download | grep ubuntu | head -n 1 | \
+	  tr -d '"'| awk '{print $2}')
+
+# Check if installed to the most recent version
+checkUptoDate $program $programVersion $urlVersion
+echo Installing $program $urlVersion
+
+# Setting up and downloading package
+cd $(dirname $programPath)
+rm $programPath
+wget $url -O $program.AppImage
+chmod +x $programPath
+
+# Create desktop file
+desktopPath="${HOME}/.local/share/applications/${program}.desktop"
+if [ ! -f $desktopPath ]; then
+    desktopFile $desktopPath $program $programPath
+fi

home/bin/installers/executable_sway-install.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+sudo $(packageManager) install sway waybar rofi mako alacritty

home/bin/installers/executable_yabridge-install.sh

@@ -0,0 +1,38 @@
+#! /bin/bash
+
+# Automatic install script for yabridge an audio bridge for linux.
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+# Install wine if not already installed
+if ! command -v wine &> /dev/null; then
+    if command -v dnf &> /dev/null; then
+	sudo dnf config-manager --add-repo \
+	     https://dl.winehq.org/wine-builds/fedora/36/winehq.repo
+    fi
+    sudo $(packageManager) install winehq-staging
+fi
+
+program=yabridgectl
+programVersion=$(yabridgectl --version | filterVersion)
+url=$(curl -s https://api.github.com/repos/robbert-vdh/yabridge/releases | \
+	  grep .tar.gz | grep releases/download | \
+	  grep -Po 'https://[^"]*.tar.gz' | grep -v ubuntu | head -n 1)
+urlVersion=$(echo $url | filterVersion | head -n 1)
+
+# Check if installed to the most recent version
+checkUptoDate $program $programVersion $urlVersion
+echo Installing $program $urlVersion
+
+# Setting up and downloading package
+mkdir -p ~/Downloads/installers/${program}
+cd ~/Downloads/installers/${program}
+wget $url
+
+# Install package
+tar -xvzf *${urlVersion}.tar.gz
+rm -rd ~/.local/share/yabridge
+mv ./yabridge ~/.local/share/
+sudo rm /bin/yabridgectl
+sudo ln -s ~/.local/share/yabridge/yabridgectl /bin/yabridgectl

home/bin/installers/executable_zsh-install.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+
+# Install and set zsh as the default shell.
+
+# Import library
+source $(dirname ${BASH_SOURCE[0]})/install-lib.sh
+
+sudo $(packageManager) install zsh
+chsh -s $(which zsh)

home/bin/launch-stocks-tracker.py

@@ -0,0 +1,30 @@
+import datetime, holidays, os
+from dateutil.tz import tzlocal
+
+tz = tzlocal()
+usHolidays = holidays.US()
+def openToday(now = None):
+    if not now:
+        now = datetime.datetime.now(tz)
+        openTime = datetime.time(hour = 9, minute = 30, second = 0)
+        closeTime = datetime.time(hour = 16, minute = 0, second = 0)
+        # If it is a holiday
+        if now.strftime('%Y-%m-%d') in usHolidays:
+            return False
+        # If it is a weekend
+        if now.date().weekday() > 4:
+            return False
+        return True
+
+
+def closed():
+     now = datetime.datetime.now(tz)
+     closeTime = datetime.time(hour = 16, minute = 0, second = 0)
+     # If before 0930 or after 1600
+     if (now.time() > closeTime):
+         return True
+     return False
+if (openToday() and not closed()):
+    print("Open")
+    os.system("i3-msg 'workspace 10; exec librewolf --new-window robinhood.com \
+        && sleep 1 && firefox -new-tab app.webull.com/watch'")

home/bin/start-firefox.py

@@ -0,0 +1,85 @@
+#!/usr/bin/env python3
+
+from i3ipc import Connection, Event
+import os, time
+
+# moveWindowToWorkspace() moves a given window to a given workspace.
+def moveWindowToWorkspace(window, workspace):
+    window.command('move window to workspace ' + workspace)
+
+# getWindows() returns a list of all open windows on the desktop.
+def getWindows(i3):
+    windows = []
+    for con in i3.get_tree():
+        if con.window and con.parent.type != 'dockarea':
+            windows.append(con)
+    return windows
+
+# getWindowByName() returns a window with the given name.
+def getWindowByName(name, windows):
+    for win in windows:
+        if name in win.name:
+            return win
+    return
+
+# filterWindowsByClass() returns a filter list of windows by class.
+def filterWindowsByClass(windowClass, windows):
+    return [w for w in windows if w.window_class == windowClass]
+
+# doesWindowExist() returns if a given window exists.
+def doesWindowExist(window):
+    return window != None
+
+# switchWorkspace() switches currently selected workspace.
+def switchWorkspace(workspace):
+    i3.command('workspace ' + workspace)
+
+# execI3() runs a command from i3wm.
+def execI3(program):
+    i3.command('exec ' + program)
+
+# launchProgram() launches a program on a given workspace.
+def launchProgram(program, workspace):
+    switchWorkspace(workspace)
+    execI3(program)
+    
+# isProgramRunning() returns if a program is running and if it is
+# moves it to a given workspace.
+def isProgramRunning(name, windows, workspace):
+    for n in name:
+        program = getWindowByName(n, windows)
+        if doesWindowExist(program):
+            moveWindowToWorkspace(program, workspace)
+            return True
+    return False
+
+
+def isPagesLoaded(windows):
+    for w in windows:
+        if 'http' not in w.name:
+            return True
+    return True
+i3 = Connection()
+windows = filterWindowsByClass('librewolf-default', getWindows(i3))
+
+while(not isPagesLoaded(windows)):
+    time.sleep(0.1)
+
+switchWorkspace('10')
+switchWorkspace('1')
+
+# Music
+if not isProgramRunning(['music.youtube.com'], windows, '10'):
+    launchProgram('librewolf --new-window music.youtube.com', '10')
+
+# Stocks
+if not isProgramRunning(['Robinhood', 'Webull'], windows, '10'):
+    os.system('python ~/bin/launch-stocks-tracker.py')
+
+# Videos
+if not isProgramRunning(['odysee.com', 'lbry.tv', 'www.youtube.com',
+                         ' - YouTube', 'hulu.com', 'netflix.com',
+                         'disneyplus.com', 'tv.youtube.com'],
+                        windows, '10'):
+    launchProgram('librewolf --new-window youtube.com/feed/subscriptions', '10')
+    launchProgram('sleep 1 && librewolf -new-tab odysee.com/$/following', '10')

home/bin/system/executable_backlight-ctl.sh

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+
+# Print help info.
+function print_help() {
+  echo 'Control the backlight brightness with animation.'
+  echo
+  echo '-i    -- increase brightness'
+  echo '-d    -- decrease brightness'
+}
+
+# Increase backlight brightness.
+function increase() {
+  run_animation 'light -A 0.1'
+}
+
+# Decrease backlight brightness.
+function decrease() {
+  run_animation 'light -U 0.1'
+}
+
+# Run animation task.
+function run_animation() {
+  local cmd="${1}"
+  i=0
+  while [ $i -lt 50 ]; do
+    ${cmd}
+    sleep 0.01
+    ((i = i + 1));
+  done
+}
+
+
+# Check arguments
+for i in "$@"; do
+  case $i in
+    -h|--help)
+      print_help
+      exit 0
+      ;;
+    -i)
+      increase
+      ;;
+    -d)
+      decrease
+      ;;
+    *)
+      print_help
+      exit 1
+      ;;
+  esac
+done
+

home/bin/system/executable_system-start.sh

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+
+# Update Passwords
+pass git pull
+
+# Desktop
+~/bin/connect-nas.sh
+systemctl --user start polybar
+systemctl --user restart streamdeck
+waybar &
+/usr/libexec/polkit-gnome-authentication-agent-1 &
+
+# Keyring
+dbus-update-activation-environment --all
+/usr/bin/gnome-keyring-daemon --start --components=secrets,pkcs11,ssh
+
+# NextCloud sync client
+nextcloud --background &

home/bin/video/executable_cr3todng.sh

@@ -0,0 +1,53 @@
+#! /bin/bash
+
+# Script to convert CR3 files to DNG.
+
+WINE_PREFIX=$(echo $HOME/.dng-wine)
+CONVERTER_PATH='C:\Program Files\Adobe\Adobe DNG Converter\Adobe DNG Converter.exe'
+FLAGS='-c -fl -p1'
+
+# Converts foreward slashes to back slashes.
+function foreward2Back() {
+    sed 's:/:\\:g'
+}
+
+# Converts a directory path a wine friendly path.
+function dir2Wine() {
+    echo 'z:'"$(echo $( cd "$1" >/dev/null 2>&1 ; pwd -P ) | foreward2Back)"
+}
+
+# Converts file path to a wine friendly path to the file.
+function file2Wine() {
+    echo $(dir2Wine $(dirname $1))\\$(basename $1)
+}
+
+# Converts a CR3 RAW file to DNG RAW.
+function convertFile() {
+    WINEPREFIX="$WINE_PREFIX" wine "$CONVERTER_PATH" \
+    $FLAGS $2 "$(file2Wine $1)" &
+}
+
+# Converts all CR3 RAW files in a directory to DNG RAW.
+function convertDir() {
+    for file in $1*.cr3; do
+	convertFile $file "-d $2"
+    done
+}
+
+start=`date +%s%N`
+
+src=$1
+dst=$(dir2Wine $2)
+
+if [[ -d $src ]]; then
+    convertDir $src $dst
+elif [[ -f $src ]]; then
+    convertFile $src $dst
+else
+    echo "$src is not valid"
+    exit 1
+fi
+
+wait
+end=`date +%s%N`
+echo Execution time was `expr $end - $start` nanoseconds.

home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1702867957

home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture @CR-10s.json

@@ -0,0 +1,40 @@
+{
+    "fan_max_speed": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture @CR-10s"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture @CR-10s",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}

home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1696802272

home/dot_config/OrcaSlicer/user/default/filament/PETG - Overture.json

@@ -0,0 +1,34 @@
+{
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_flow_ratio": [
+        "0.9025"
+    ],
+    "filament_settings_id": [
+        "PETG - Overture"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "from": "User",
+    "inherits": "My Generic PETG",
+    "is_custom_defined": "0",
+    "name": "PETG - Overture",
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "pressure_advance": [
+        "0.26"
+    ],
+    "slow_down_layer_time": [
+        "1"
+    ],
+    "version": "1.6.1.0"
+}

home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1734886086

home/dot_config/OrcaSlicer/user/default/filament/Voron Overture PETG.json

@@ -0,0 +1,13 @@
+{
+    "filament_flow_ratio": [
+        "0.955"
+    ],
+    "filament_settings_id": [
+        "Voron Overture PETG"
+    ],
+    "from": "User",
+    "inherits": "Voron Generic PETG",
+    "is_custom_defined": "0",
+    "name": "Voron Overture PETG",
+    "version": "2.2.0.4"
+}

home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1728686097

home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "from": "User",
+    "inherits": "Voron 2.4 350 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "name": "AquaVoron 2.4 350 0.4 nozzle",
+    "print_host": "192.168.20.21",
+    "printer_settings_id": "AquaVoron 2.4 350 0.4 nozzle",
+    "version": "1.8.0.0"
+}

home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM003
+updated_time = 1728686148

home/dot_config/OrcaSlicer/user/default/machine/AquaVoron 2.4 350 0.6 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "from": "User",
+    "inherits": "Voron 2.4 350 0.6 nozzle",
+    "is_custom_defined": "0",
+    "machine_start_gcode": "PRINT_START BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "name": "AquaVoron 2.4 350 0.6 nozzle",
+    "print_host": "http://192.168.20.21",
+    "printer_settings_id": "AquaVoron 2.4 350 0.6 nozzle",
+    "retraction_length": [
+        "0.1"
+    ],
+    "version": "1.8.0.0"
+}

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695585702

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.25 nozzle.json

@@ -0,0 +1,86 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.25 nozzle",
+    "nozzle_diameter": [
+        "0.25"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.5",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.25 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695585702

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.4 nozzle.json

@@ -0,0 +1,86 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "https://cr10.aquamorph.com",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.4 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1702220626

home/dot_config/OrcaSlicer/user/default/machine/CR-10s 0.6 nozzle.json

@@ -0,0 +1,89 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "CR-10s 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.20.20",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "400",
+    "printer_settings_id": "CR-10s 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1695341948

home/dot_config/OrcaSlicer/user/default/machine/Ender 3 0.6 nozzle.json

@@ -0,0 +1,85 @@
+{
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;{layer_z}\n\n",
+    "from": "User",
+    "inherits": "MyKlipper 0.4 nozzle",
+    "is_custom_defined": "0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_max_acceleration_extruding": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "5000"
+    ],
+    "machine_max_acceleration_x": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "500",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "12"
+    ],
+    "machine_start_gcode": "START_PRINT BED_TEMP=[bed_temperature_initial_layer_single] EXTRUDER_TEMP=[nozzle_temperature_initial_layer]",
+    "max_layer_height": [
+        "0.48"
+    ],
+    "name": "Ender 3 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "brass",
+    "print_host": "192.168.1.6",
+    "printable_area": [
+        "0x0",
+        "235x0",
+        "235x235",
+        "0x235"
+    ],
+    "printer_settings_id": "Ender 3 0.6 nozzle",
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "use_firmware_retraction": "1",
+    "version": "1.6.1.0",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1735702877

home/dot_config/OrcaSlicer/user/default/process/0.18mm Fine 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.18mm Fine 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.18mm Fine 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1702867957

home/dot_config/OrcaSlicer/user/default/process/0.20mm Standard CR-10s.json

@@ -0,0 +1,41 @@
+{
+    "brim_type": "no_brim",
+    "brim_width": "10",
+    "default_acceleration": "0",
+    "enable_support": "1",
+    "from": "User",
+    "gap_infill_speed": "30",
+    "infill_combination": "1",
+    "inherits": "0.20mm Standard @MyKlipper",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "35",
+    "initial_layer_line_width": "137%",
+    "initial_layer_speed": "20",
+    "inner_wall_acceleration": "0",
+    "inner_wall_line_width": "112%",
+    "inner_wall_speed": "35",
+    "internal_solid_infill_line_width": "112%",
+    "internal_solid_infill_speed": "50",
+    "is_custom_defined": "0",
+    "line_width": "100%",
+    "name": "0.20mm Standard CR-10s",
+    "outer_wall_acceleration": "0",
+    "outer_wall_line_width": "80%",
+    "outer_wall_speed": "35",
+    "print_settings_id": "0.20mm Standard CR-10s",
+    "sparse_infill_density": "30%",
+    "sparse_infill_line_width": "107%",
+    "sparse_infill_pattern": "adaptivecubic",
+    "sparse_infill_speed": "60",
+    "support_interface_speed": "30",
+    "support_line_width": "95%",
+    "support_object_xy_distance": "0.75",
+    "support_speed": "30",
+    "support_type": "tree(auto)",
+    "top_surface_acceleration": "0",
+    "top_surface_line_width": "107%",
+    "top_surface_speed": "30",
+    "travel_acceleration": "1500",
+    "travel_speed": "150",
+    "version": "1.6.1.0"
+}

home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.info

@@ -0,0 +1,5 @@
+sync_info = 
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1736606291

home/dot_config/OrcaSlicer/user/default/process/0.30mm Standard 0.6 nozzle @Voron - AquaMorph.json

@@ -0,0 +1,9 @@
+{
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.30mm Standard 0.6 nozzle @Voron",
+    "is_custom_defined": "0",
+    "name": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "print_settings_id": "0.30mm Standard 0.6 nozzle @Voron - AquaMorph",
+    "version": "2.2.0.4"
+}

home/dot_config/alacritty/alacritty.toml

@@ -0,0 +1,606 @@
+
+[bell]
+animation = "EaseOutExpo"
+color = "0xffffff"
+duration = 0
+
+[colors]
+draw_bold_text_with_bright_colors = true
+
+[colors.bright]
+black = "0x666666"
+blue = "0x7aa6da"
+cyan = "0x54ced6"
+green = "0x9ec400"
+magenta = "0xb77ee0"
+red = "0xff3334"
+white = "0xffffff"
+yellow = "0xe7c547"
+
+[colors.normal]
+black = "0x000000"
+blue = "0x7aa6da"
+cyan = "0x70c0ba"
+green = "0xb9ca4a"
+magenta = "0xc397d8"
+red = "0xd54e53"
+white = "0xeaeaea"
+yellow = "0xe6c547"
+
+[colors.primary]
+background = "0x000000"
+foreground = "0x0288d1"
+
+[cursor]
+style = "Block"
+unfocused_hollow = true
+
+[debug]
+log_level = "Warn"
+persistent_logging = false
+print_events = false
+render_timer = false
+
+[font]
+size = 16.0
+
+[font.glyph_offset]
+x = 0
+y = 0
+
+[font.normal]
+family = "Inconsolata"
+style = "Monospace"
+
+[font.offset]
+x = 0
+y = 0
+
+[[keyboard.bindings]]
+action = "Paste"
+key = "Paste"
+
+[[keyboard.bindings]]
+action = "Copy"
+key = "Copy"
+
+[[keyboard.bindings]]
+action = "ClearLogNotice"
+key = "L"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\f"
+key = "L"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3H"
+key = "Home"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001BOH"
+key = "Home"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[H"
+key = "Home"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3F"
+key = "End"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001BOF"
+key = "End"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[F"
+key = "End"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+action = "ScrollPageUp"
+key = "PageUp"
+mode = "~Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;2~"
+key = "PageUp"
+mode = "Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;5~"
+key = "PageUp"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[5;3~"
+key = "PageUp"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[5~"
+key = "PageUp"
+
+[[keyboard.bindings]]
+action = "ScrollPageDown"
+key = "PageDown"
+mode = "~Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;2~"
+key = "PageDown"
+mode = "Alt"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;5~"
+key = "PageDown"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[6;3~"
+key = "PageDown"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[6~"
+key = "PageDown"
+
+[[keyboard.bindings]]
+chars = "\u001B[Z"
+key = "Tab"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u007F"
+key = "Back"
+
+[[keyboard.bindings]]
+chars = "\u001B\u007F"
+key = "Back"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[2~"
+key = "Insert"
+
+[[keyboard.bindings]]
+chars = "\u001B[3~"
+key = "Delete"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2D"
+key = "Left"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5D"
+key = "Left"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3D"
+key = "Left"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[D"
+key = "Left"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOD"
+key = "Left"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2C"
+key = "Right"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5C"
+key = "Right"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3C"
+key = "Right"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[C"
+key = "Right"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOC"
+key = "Right"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2A"
+key = "Up"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5A"
+key = "Up"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3A"
+key = "Up"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[A"
+key = "Up"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOA"
+key = "Up"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2B"
+key = "Down"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5B"
+key = "Down"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3B"
+key = "Down"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[B"
+key = "Down"
+mode = "~AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOB"
+key = "Down"
+mode = "AppCursor"
+
+[[keyboard.bindings]]
+chars = "\u001BOP"
+key = "F1"
+
+[[keyboard.bindings]]
+chars = "\u001BOQ"
+key = "F2"
+
+[[keyboard.bindings]]
+chars = "\u001BOR"
+key = "F3"
+
+[[keyboard.bindings]]
+chars = "\u001BOS"
+key = "F4"
+
+[[keyboard.bindings]]
+chars = "\u001B[15~"
+key = "F5"
+
+[[keyboard.bindings]]
+chars = "\u001B[17~"
+key = "F6"
+
+[[keyboard.bindings]]
+chars = "\u001B[18~"
+key = "F7"
+
+[[keyboard.bindings]]
+chars = "\u001B[19~"
+key = "F8"
+
+[[keyboard.bindings]]
+chars = "\u001B[20~"
+key = "F9"
+
+[[keyboard.bindings]]
+chars = "\u001B[21~"
+key = "F10"
+
+[[keyboard.bindings]]
+chars = "\u001B[23~"
+key = "F11"
+
+[[keyboard.bindings]]
+chars = "\u001B[24~"
+key = "F12"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2P"
+key = "F1"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2Q"
+key = "F2"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2R"
+key = "F3"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;2S"
+key = "F4"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;2~"
+key = "F5"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;2~"
+key = "F6"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;2~"
+key = "F7"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;2~"
+key = "F8"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;2~"
+key = "F9"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;2~"
+key = "F10"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;2~"
+key = "F11"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;2~"
+key = "F12"
+mods = "Shift"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5P"
+key = "F1"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5Q"
+key = "F2"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5R"
+key = "F3"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;5S"
+key = "F4"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;5~"
+key = "F5"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;5~"
+key = "F6"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;5~"
+key = "F7"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;5~"
+key = "F8"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;5~"
+key = "F9"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;5~"
+key = "F10"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;5~"
+key = "F11"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;5~"
+key = "F12"
+mods = "Control"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6P"
+key = "F1"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6Q"
+key = "F2"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6R"
+key = "F3"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;6S"
+key = "F4"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;6~"
+key = "F5"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;6~"
+key = "F6"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;6~"
+key = "F7"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;6~"
+key = "F8"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;6~"
+key = "F9"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;6~"
+key = "F10"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;6~"
+key = "F11"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;6~"
+key = "F12"
+mods = "Alt"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3P"
+key = "F1"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3Q"
+key = "F2"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3R"
+key = "F3"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[1;3S"
+key = "F4"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[15;3~"
+key = "F5"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[17;3~"
+key = "F6"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[18;3~"
+key = "F7"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[19;3~"
+key = "F8"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[20;3~"
+key = "F9"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[21;3~"
+key = "F10"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[23;3~"
+key = "F11"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = "\u001B[24;3~"
+key = "F12"
+mods = "Super"
+
+[[keyboard.bindings]]
+chars = """
+
+"""
+key = "NumpadEnter"
+
+[mouse]
+hide_when_typing = false
+
+[[mouse.bindings]]
+action = "PasteSelection"
+mouse = "Middle"
+
+[scrolling]
+history = 10000
+multiplier = 3
+
+[selection]
+save_to_clipboard = false
+semantic_escape_chars = ",│`|:\"' ()[]{}<>"
+
+[window]
+decorations = "full"
+dynamic_padding = false
+opacity = 0.8
+startup_mode = "Windowed"
+
+[window.dimensions]
+columns = 0
+lines = 0
+
+[window.padding]
+x = 4
+y = 4
+
+[general]
+live_config_reload = true
+working_directory = "None"

home/dot_config/g13/among-us.bind

@@ -0,0 +1,32 @@
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Map Toggle / Sabotage
+bind LEFT KEY_TAB
+
+# Use Vent as Imposter
+bind STICK_DOWN KEY_V
+
+# Interact
+bind G22 KEY_SPACE
+
+# Kill
+bind STICK_UP KEY_Q
+
+# Report
+bind G6 KEY_R
+
+# Role Ability
+bind DOWN KEY_F
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+
+rgb 255 0 0

home/dot_config/g13/arkham-knight.bind

@@ -0,0 +1,39 @@
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+bind G20 KEY_RIGHTCTRL
+bind G15 KEY_RIGHTCTRL
+
+# Hook
+bind STICK_UP KEY_F
+bind STICK_DOWN KEY_F
+
+# Enter Batmobile
+bind DOWN KEY_E
+
+# Detective Mode
+bind G5 LEFT KEY_X
+
+# Choose gadget
+bind G14 KEY_G
+
+# Augmented Reality Challenges
+bind G19 KEY_ C
+
+# Mission Choice
+bind G1 KEY_V
+
+# Electric Tool
+bind G6 KEY_4
+
+rgb 255 5 5

home/dot_config/g13/cyberpunk-2077.bind

@@ -0,0 +1,35 @@
+# Cyberpunk 2077
+	    
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+bind G15 KEY_LEFTSHIFT
+bind G20 KEY_LEFTCTRL
+
+bind G1 KEY_ESC
+bind G2 KEY_I
+bind G3 KEY_Q
+bind G5 KEY_E
+bind G6 KEY_R
+bind G7 KEY_T
+bind G14 KEY_M
+bind G16 KEY_Z
+bind G17 KEY_X
+bind G18 KEY_C
+bind G19 KEY_V
+
+bind LEFT KEY_F
+bind DOWN KEY_TAB
+bind STICK_UP KEY_LEFTALT
+
+rgb 252 236 12

home/dot_config/g13/doom-eternal.bind

@@ -0,0 +1,65 @@
+# =================     ===============     ===============   ========  ========
+# \\ . . . . . . .\\   //. . . . . . .\\   //. . . . . . .\\  \\. . .\\// . . //
+# ||. . ._____. . .|| ||. . ._____. . .|| ||. . ._____. . .|| || . . .\/ . . .||
+# || . .||   ||. . || || . .||   ||. . || || . .||   ||. . || ||. . . . . . . ||
+# ||. . ||   || . .|| ||. . ||   || . .|| ||. . ||   || . .|| || . | . . . . .||
+# || . .||   ||. _-|| ||-_ .||   ||. . || || . .||   ||. _-|| ||-_.|\ . . . . ||
+# ||. . ||   ||-'  || ||  `-||   || . .|| ||. . ||   ||-'  || ||  `|\_ . .|. .||
+# || . _||   ||    || ||    ||   ||_ . || || . _||   ||    || ||   |\ `-_/| . ||
+# ||_-' ||  .|/    || ||    \|.  || `-_|| ||_-' ||  .|/    || ||   | \  / |-_.||
+# ||    ||_-'      || ||      `-_||    || ||    ||_-'      || ||   | \  / |  `||
+# ||    `'         || ||         `'    || ||    `'         || ||   | \  / |   ||
+# ||            .===' `===.         .==='.`===.         .===' /==. |  \/  |   ||
+# ||         .=='   \_|-_ `===. .==='   _|_   `===. .===' _-|/   `==  \/  |   ||
+# ||      .=='    _-'    `-_  `='    _-'   `-_    `='  _-'   `-_  /|  \/  |   ||
+# ||   .=='    _-'          `-__\._-'         `-_./__-'         `' |. /|  |   ||
+# ||.=='    _-'                                                     `' |  /==.||
+# =='    _-'                                                            \/   `==
+# \   _-'                                                                `-_   /
+#  `''                                                                      ``'
+
+	    
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+bind G15 KEY_LEFTSHIFT
+
+# Weapon Select
+## Glorykill/Use
+bind LEFT KEY_E
+## Flame Belch
+bind DOWN KEY_R
+## Chainsaw
+bind G19 KEY_C
+## Super Shotgun
+bind STICK_LEFT KEY_5
+## Rocket Launcher
+bind STICK_UP KEY_4
+## Heavy Cannon
+bind STICK_RIGHT KEY_2
+## Plasma Rifle
+bind STICK_DOWN KEY_3
+## Ballista
+bind G6 KEY_6
+## BFG-9000
+bind G7 KEY_8
+
+## Chaingun
+bind G5 KEY_7
+
+# Dossier
+bind G1 KEY_TAB
+# Mission Informatmation
+bind G2 KEY_LEFTALT
+
+rgb 66 00 00

home/dot_config/g13/doom.bind

@@ -0,0 +1,65 @@
+# =================     ===============     ===============   ========  ========
+# \\ . . . . . . .\\   //. . . . . . .\\   //. . . . . . .\\  \\. . .\\// . . //
+# ||. . ._____. . .|| ||. . ._____. . .|| ||. . ._____. . .|| || . . .\/ . . .||
+# || . .||   ||. . || || . .||   ||. . || || . .||   ||. . || ||. . . . . . . ||
+# ||. . ||   || . .|| ||. . ||   || . .|| ||. . ||   || . .|| || . | . . . . .||
+# || . .||   ||. _-|| ||-_ .||   ||. . || || . .||   ||. _-|| ||-_.|\ . . . . ||
+# ||. . ||   ||-'  || ||  `-||   || . .|| ||. . ||   ||-'  || ||  `|\_ . .|. .||
+# || . _||   ||    || ||    ||   ||_ . || || . _||   ||    || ||   |\ `-_/| . ||
+# ||_-' ||  .|/    || ||    \|.  || `-_|| ||_-' ||  .|/    || ||   | \  / |-_.||
+# ||    ||_-'      || ||      `-_||    || ||    ||_-'      || ||   | \  / |  `||
+# ||    `'         || ||         `'    || ||    `'         || ||   | \  / |   ||
+# ||            .===' `===.         .==='.`===.         .===' /==. |  \/  |   ||
+# ||         .=='   \_|-_ `===. .==='   _|_   `===. .===' _-|/   `==  \/  |   ||
+# ||      .=='    _-'    `-_  `='    _-'   `-_    `='  _-'   `-_  /|  \/  |   ||
+# ||   .=='    _-'          `-__\._-'         `-_./__-'         `' |. /|  |   ||
+# ||.=='    _-'                                                     `' |  /==.||
+# =='    _-'                                                            \/   `==
+# \   _-'                                                                `-_   /
+#  `''                                                                      ``'
+
+	    
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+
+# Weapon Select
+## Pistol
+bind STICK_DOWN KEY_1
+## Rocket Launcher
+bind STICK_LEFT KEY_5
+## Heavy Assault Rifle
+bind STICK_RIGHT KEY_4
+# Combat Shotgun
+bind STICK_UP KEY_2
+# Chaingun
+bind G3 KEY_8
+# Super Shotgun
+bind DOWN KEY_6
+
+
+# Other
+## Use
+bind G6 KEY_E
+
+bind G20 KEY_RIGHTCTRL
+bind G15 KEY_RIGHTCTRL
+
+# Other
+bind GR KEY_R
+bind LEFT KEY_F
+
+bind G18 KEY_C
+bind G13 KEY_X
+
+rgb 66 00 00

home/dot_config/g13/factorio.bind

@@ -0,0 +1,48 @@
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character screen / Confirm Window
+bind G5 KEY_E
+
+# Clear cursor / Pipette tool
+bind G3 KEY_Q
+
+# Rotate
+bind G6 KEY_R
+
+# Flip blueprints horizontal / Pickup ground item
+bind G13 KEY_F
+
+# Flip blueprints vertical
+bind G14 KEY_G
+
+# Drop Item
+bind G16 KEY_Z
+
+# Shoot selected
+bind G18 KEY_C
+
+#
+bind STICK_UP KEY_1
+bind STICK_RIGHT KEY_2
+bind STICK_DOWN KEY_3
+bind STICK_LEFT KEY_4
+
+# Other
+bind G22 KEY_SPACE
+bind G15 KEY_LEFTSHIFT
+bind G20 KEY_LEFTCTRL
+bind DOWN KEY_ENTER
+bind LEFT KEY_TAB
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+
+rgb 230 145 0

home/dot_config/g13/fall-guys.bind

@@ -0,0 +1,35 @@
+# Fall Guys
+
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+
+# Switch Character
+bind G3 KEY_Q
+bind G5 KEY_E
+
+# Jump
+bind G22 KEY_SPACE
+
+# Dive
+bind G15 KEY_RIGHTCTRL
+
+# Grab
+bind LEFT KEY_LEFTSHIFT
+
+# Show names
+bind DOWN KEY_TAB
+
+# Other
+bind G1 KEY_ESC
+
+rgb 0 128 180

home/dot_config/g13/minecraft.bind

@@ -0,0 +1,22 @@
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+
+# Other
+bind G3 KEY_Q
+bind G5 KEY_E
+bind G1 KEY_ESC
+bind G22 KEY_SPACE
+bind G15 KEY_LEFTSHIFT
+bind LEFT KEY_TAB
+
+rgb 128 255 31

home/dot_config/g13/overwatch.bind

@@ -0,0 +1,31 @@
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+bind G20 KEY_RIGHTCTRL
+bind G15 KEY_RIGHTCTRL
+
+# Reload
+bind G6 KEY_R
+
+# Abilities
+bind STICK_UP KEY_LEFTSHIFT
+bind STICK_DOWN KEY_E
+bind DOWN KEY_Q
+
+# Display
+bind LEFT KEY_TAB
+
+bind G18 KEY_C
+bind G13 KEY_X
+
+rgb 250 156 29

home/dot_config/g13/planet-coaster.bind

@@ -0,0 +1,33 @@
+# Planet Coaster
+
+# Setup stick bounds
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Camera Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G3 KEY_Q
+bind G5 KEY_E
+
+# Pause
+bind G22 KEY_P
+
+# Path Length
+bind M3 KEY_MINUS
+bind MR KEY_EQUAL
+# Path Width
+bind M1 KEY_LEFTBRACE
+bind M2 KEY_RIGHTBRACE
+
+# History
+bind G1 KEY_LEFTCTRL+KEY_Z
+bing G2 KEY_LEFTCTRL+KEY_Y
+
+rgb 0 120 181

home/dot_config/g13/planet-coaster.lpbm

@@ -0,0 +1 @@
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϟ??<><7F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>333<03><><EFBFBD><03><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>?<0F><>?<3F><><EFBFBD><07><><03><03><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><03><><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD><77><EFBFBD><EFBFBD><06><><EFBFBD><EFBFBD>ٝ-s;<3B><>oo<6F><6F><EFBFBD>~xA<78><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><1F><><03><><EFBFBD><EFBFBD>cc<63><63><03><><EFBFBD>c<07><><07><><7F>ǃ<EFBFBD><C783><EFBFBD>?<3F><><EFBFBD><EFBFBD><03><><EFBFBD><EFBFBD><EFBFBD><03><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>333<03><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>߿<7F><7F><EFBFBD>}{;<3B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>

home/dot_config/g13/portal.bind

@@ -0,0 +1,31 @@
+# Portal
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Character Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G22 KEY_SPACE
+bind G20 KEY_RIGHTCTRL
+bind G15 KEY_RIGHTCTRL
+
+
+# Pickup/Use Object
+bind G6 KEY_E
+
+# Pause
+bind G1 KEY_ESC
+
+# Ping
+bind DOWN KEY_F
+
+# Gesture (co-op)
+bind LEFT KEY_Q
+
+rgb 61 189 238

home/dot_config/g13/resolve.bind

@@ -0,0 +1,59 @@
+# Set Pink Backlight
+rgb 220 48 104
+
+# Setup distinct/non-overlapping 4-Way zones
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Undo and Redo
+bind STICK_LEFT KEY_RIGHTCTRL+KEY_Z
+bind STICK_RIGHT KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_Z
+
+# Play
+bind G22 KEY_SPACE
+
+# Playback keys
+bind G16 KEY_J
+bind G17 KEY_K
+bind G18 KEY_L
+bind G4 KEY_UP
+bind G10 KEY_LEFT
+bind G11 KEY_DOWN
+bind G12 KEY_RIGHT
+
+# In Out Markers
+bind G3 KEY_I
+bind G5 KEY_O
+
+# Move clips in place
+bind G19 KEY_LEFTCTRL+KEY_LEFTSHIFT
+
+bind L1 KEY_N
+bind L2 KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_L
+
+# Select and blade
+bind LEFT KEY_A
+bind DOWN KEY_B
+
+# Delete
+bind STICK_UP KEY_DELETE
+bind STICK_DOWN KEY_BACKSPACE
+
+# Change timeline zoom
+bind G21 KEY_LEFTALT
+
+# Switch workspaces
+bind M1 KEY_LEFTSHIFT+KEY_2
+bind M2 KEY_LEFTSHIFT+KEY_3
+bind M3 KEY_LEFTSHIFT+KEY_4
+bind MR KEY_LEFTSHIFT+KEY_6
+
+# Add to end of timeline
+bind G13 KEY_LEFTSHIFT+KEY_F12
+
+# Save
+bind BD KEY_LEFTCTRL+KEY_S

home/dot_config/g13/two-point-hospital.bind

@@ -0,0 +1,27 @@
+# Two Point Hospital
+
+# Setup stick bounds
+stickzone del STICK_PAGEUP
+stickzone del STICK_PAGEDOWN
+stickzone bounds STICK_LEFT 0.0 0.3 0.2 0.7
+stickzone bounds STICK_RIGHT 0.8 0.3 1.0 0.7
+stickzone bounds STICK_UP 0.3 0.0 0.7 0.2
+stickzone bounds STICK_DOWN 0.3 0.8 0.7 1.0
+
+# Camera Movement
+bind G4 KEY_W
+bind G10 KEY_A
+bind G11 KEY_S
+bind G12 KEY_D
+bind G3 KEY_Q
+bind G5 KEY_E
+
+# Rotate objects
+bind STICK_LEFT KEY_Z
+bind STICK_RIGHT KEY_X
+
+# Other
+bind G22 KEY_SPACE
+bing G1 KEY_ESC
+
+rgb 12 167 145

home/dot_config/gtk-3.0/settings.ini

@@ -0,0 +1,6 @@
+[Settings]
+#gtk-icon-theme-name=Flat-Remix-Blue-Dark
+#gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
+gtk-font-name=SF Pro Display 14
+gtk-application-prefer-dark-theme=1
+gtk-decoration-layout=0

home/dot_config/gtk-4.0/settings.ini

@@ -0,0 +1,6 @@
+[Settings]
+#gtk-icon-theme-name=Flat-Remix-Blue-Dark
+#gtk-theme-name=Flat-Remix-GTK-Blue-Darkest-Solid
+gtk-font-name=SF Pro Display 14
+gtk-application-prefer-dark-theme=1
+gtk-decoration-layout=0

home/dot_config/hypr/bind-all.conf

@@ -0,0 +1,51 @@
+$mainMod = SUPER
+
+# Keybindings
+bind = $mainMod, return, exec, $terminal
+bind = $mainMod, Q, killactive,
+bind = $mainMod, C, exit,
+bind = $mainMod, E, exec, $fileManager
+bind = $mainMod, V, togglefloating,
+bind = $mainMod, D, exec, $menu
+bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod, J, togglesplit, # dwindle
+bind = $mainMod, L, exec, hyprlock
+bind = $mainMod, F, fullscreen
+
+# Move focus window
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+
+# Switch workspaces
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+
+# Move active window to a workspace
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow

home/dot_config/hypr/bind-framework.conf

@@ -0,0 +1,17 @@
+# Screen brightness controls
+exec-once = light -N 1
+bind = ,XF86MonBrightnessUp, exec, ~/bin/system/backlight-ctl.sh -i
+bind = ,XF86MonBrightnessDown, exec, ~/bin/system/backlight-ctl.sh -d
+
+# Pulse Audio controls
+bind = ,XF86AudioRaiseVolume, exec, amixer set Master 3%+ #increase sound volume
+bind = ,XF86AudioLowerVolume, exec, amixer set Master 3%- #decrease sound volume
+bind = ,XF86AudioMute, exec, amixer set Master toggle # toggle sound
+
+# Media controls
+bind = ,XF86AudioPrev, exec, playerctl previous
+bind = ,XF86AudioPlay, exec, playerctl play-pause
+bind = ,XF86AudioNext, exec, playerctl next
+
+# Lockscreen
+bind = $mainMod, escape, exec, swaylock

home/dot_config/hypr/env.conf

@@ -0,0 +1,4 @@
+# Programs
+$terminal = alacritty
+$fileManager = dolphin
+$menu = rofi -show combi

home/dot_config/hypr/general.conf

@@ -0,0 +1,43 @@
+general {
+  gaps_in = 5
+  gaps_out = 5
+  border_size = 2
+  col.active_border = rgba(e91e63ee) rgba(ffcdd2ee) 45deg
+  col.inactive_border = rgba(0288d1aa)
+  layout = dwindle
+  allow_tearing = false
+}
+
+decoration {
+  rounding = 5
+
+  blur {
+    enabled = true
+    size = 3
+    passes = 1
+  } 
+}
+
+animations {
+  enabled = yes
+  bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+  animation = windows, 1, 3, myBezier
+  animation = windowsOut, 1, 7, default, popin 80%
+  animation = border, 1, 10, default
+  animation = borderangle, 1, 8, default
+  animation = fade, 1, 7, default
+  animation = workspaces, 1, 2, default
+}
+
+dwindle {
+  pseudotile = yes
+  preserve_split = yes
+  force_split = 2
+}
+
+master {
+  orientation = right
+}
+
+gesture = 3, horizontal, workspace
+

home/dot_config/hypr/hyprland.conf

@@ -0,0 +1,40 @@
+monitor=eDP-1,2256x1504@60,auto,1.175
+
+# Enviroment
+source = ~/.config/hypr/env.conf
+
+# Startup programs
+source = ~/.config/hypr/startup-all.conf
+source = ~/.config/hypr/startup-framework.conf
+
+# Default env vars
+env = XCURSOR_SIZE,24
+env = QT_QPA_PLATFORMTHEME,qt5ct
+
+source = ~/.config/hypr/general.conf
+
+input {
+  kb_layout = us
+  kb_variant =
+  kb_model =
+  kb_options =
+  kb_rules =
+  follow_mouse = 1
+  touchpad {
+    natural_scroll = yes
+  }
+  sensitivity = 0
+}
+
+xwayland {
+  force_zero_scaling = true
+}
+
+misc {
+  force_default_wallpaper = 0
+}
+
+windowrulev2 = suppressevent maximize, class:.*
+
+source = ~/.config/hypr/bind-all.conf
+source = ~/.config/hypr/bind-framework.conf